Skip to content
  1. Home
  2. Keys and Remotes
  3. Smart Keys
  4. Lonsdor LT21-04 Smart Key PCB 4-button - Toyota Shape 8A-B6 - Adjustable Frequency - Board Only - Aftermarket · New
Lonsdor LT21-04 Smart Key PCB 4-button - Toyota Shape 8A-B6 - Adjustable Frequency - Board Only - Aftermarket · New

Lonsdor LT21-04 Smart Key PCB 4-button - Toyota Shape 8A-B6 - Adjustable Frequency - Board Only - Aftermarket · New

Aftermarket

SKU: B03408

$53.37
AED  190.00
  • 8ATransponder
  • 4-buttonButtons

In Stock

Specifications

Lonsdor LT21-04 smart key PCB, 4-button, Toyota shaped, for the 8A-B6 system. Board only, adjustable frequency, generated on a Lonsdor programmer.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Lonsdor · New

Lonsdor LT21-04 Smart Key PCB 4-Button Toyota 8A-B6

board only · generated on the tool · no shell, no blade, no battery

Board Only
Supply form
4-Button
Button count
LT21-04
Lonsdor model
8A-B6
Toyota system

⭐ The Lonsdor LT21-04 is a four-button smart key board for the Toyota 8A-B6 system, the immobiliser generation the Land Cruiser runs on the newer cars. It ships as a bare PCB: no housing, no emergency blade and no battery, so the board goes into a shell you already stock. Nothing is pre-coded into it either, because the profile is written on a Lonsdor programmer before the vehicle side of the job starts. Aftermarket, new.

⚙️ Key features

Built for 8A-B6

The board answers the Toyota 8A-B6 immobiliser rather than the older smart key generations.

Board only

A bare PCB for shops that already hold the housings, so the case cost is not paid twice.

Four-button layout

A four-button board, so the shell and the pad it goes into have to match that count.

Generated on the tool

The profile is written by a Lonsdor programmer, which is what ties the board to the target car.

💎 Benefits

Cheaper than a complete key

The board alone costs less than a finished smart key, which matters on a newer vehicle.

Pairs with the shells you stock

The housing is chosen separately, so a shelf of cases covers several board jobs.

Newer cars kept in house

The 8A-B6 work stays in the workshop instead of going back to the dealer.

Generic until written

An unused board holds no vehicle identity, so stock is not stranded on one car.

👥 Who it's for

Lonsdor tool owners

Workshops running a K518 series programmer that already covers the 8A-B6 menu.

Key shops and counter trade

Shops that hold Toyota housings and want the electronics on their own.

Mobile technicians

Carrying boards rather than finished keys keeps the van stock small.

Busy workshops

Newer Toyota proximity work handled in house instead of being turned away.

🚗 Vehicle coverage

THE SYSTEM DECIDES, NOT THE BADGE
Built for one system: this board is for the Toyota 8A-B6 immobiliser, which is the generation the Land Cruiser runs on the newer cars, and it is not a board for the earlier smart key types.
Read the car first: identify the immobiliser on the vehicle with the tool before ordering, because the model badge alone does not settle which system is fitted.
Coverage sits in the software: the vehicle list for this board is the list published in the Lonsdor software, and it grows as the tool is updated.
Check coverage first: read the vehicle out in the key generation menu and check that LT21-04 is the board offered for it before the job is quoted.

📦 What's included

✅ IN THE BOX

✔ 1 x Lonsdor LT21-04 smart key board, 4-button, blank

❌ NOT INCLUDED

✘ Key shell - the board goes into a four-button housing ordered separately

✘ Emergency blade - supplied with the housing rather than with the board

✘ Battery - fit a fresh cell of the size the housing takes

✘ Generation - the profile is written by a Lonsdor programmer, which is not supplied here

✘ Programming - the generated key is then learned to the vehicle as a separate step

📋 Specifications

🧠 BOARD
Brand
Lonsdor
Model code
LT21-04
Supply form
PCB only, no housing
Shape
Toyota shaped board
Buttons
4-button
Supply state
Blank, generated on the tool
💾 SYSTEM
Immobiliser type
Toyota 8A-B6
Vehicle named by the store
Land Cruiser
Frequency
Adjustable, set at generation
🛠️ GENERATED WITH
Lonsdor programmers
K518 PRO and K518ISE
Menu route
Immo and Remote, Toyota, PEPS type for the 8A-B6 cars
📦 PHYSICAL
Condition
Aftermarket, New
Quantity
1 piece

🛠️ Generation and programming

STEP ONE - BUILD AND GENERATE
1Fit the board into a four-button housing with a fresh battery and check every button moves freely.
2Read the vehicle out and check the immobiliser is the 8A-B6 type this board is built for.
3Open the key generation menu on the Lonsdor programmer, select the vehicle and check that LT21-04 is the board offered for it.
4Run the generation so the profile is written into the board, keeping other blanks away from the tool while it writes.
STEP TWO - LEARN IT TO THE VEHICLE
Immobiliser side: the generated key is registered to the vehicle through the Toyota key learning routine, exactly as a factory key would be.
Spare or all keys lost: the route differs between adding a key and an all keys lost job, so read the vehicle out before starting.
Tools: K518 PRO and K518ISE publish the 8A-B6 work, on the Toyota immobiliser menu for the newer cars.
Check coverage first: the menu path, the point cost and the supported vehicle list depend on the tool model and the software version installed on it. Verify the vehicle in the menu before the job.

Frequently Asked Questions

Common questions about this product

The Lonsdor LT21-04 smart key board on its own: a four-button PCB with no housing, no emergency blade and no battery. It arrives blank, so the profile is written on a Lonsdor programmer before the car sees it.
The Toyota 8A-B6 immobiliser, which is the generation the Land Cruiser runs on the newer cars. A vehicle running an earlier smart key generation needs a different board from the Lonsdor line rather than this one, so read the car out first.
No. The board is generated on a Lonsdor programmer first, which writes the vehicle profile into it, and the finished key is then learned to the car through the Toyota key registration routine. Both steps happen at the bench, in that order.
K518 PRO and K518ISE publish the 8A-B6 work on the Toyota immobiliser menu. The menu path, the point cost and the supported vehicle list all depend on the tool model and on the software version currently installed on it.
Yes. The board ships bare, so a four-button housing with an emergency blade and a battery is ordered separately and built up around it at the bench, before the key goes anywhere near the vehicle for the programming step.
Read the vehicle out with the tool rather than judging by the badge or the year, because the same model name covers more than one immobiliser generation over the years and only the tool settles which one is actually fitted to that car.
No. It is a Lonsdor product, sold as an aftermarket board, and it carries no vehicle manufacturer branding of any kind. The model code and the immobiliser type are what identify this board, rather than a factory part number.
Only in the moulding. The two codes in this line are the same board electrically, so the shape of the housing the job needs is what decides which one is ordered rather than any difference in what the board actually does.

Last updated: 18 November 2026

Related lookups:FCC LT2104