Skip to content
  1. Home
  2. Keys and Remotes
  3. Smart Keys
  4. Lynk & Co 05 09 2023-2024 Smart Key 3-button 433MHz - 8890222241 ID8A HU101
Lynk & Co 05 09 2023-2024 Smart Key 3-button 433MHz - 8890222241 ID8A HU101

Lynk & Co 05 09 2023-2024 Smart Key 3-button 433MHz - 8890222241 ID8A HU101

Genuine new

SKU: B08838

$42.13
AED  150.00

Fits Lynk & Co 05 2023–2024 ·

  • 433 MHzFrequency
  • ID8ATransponder
  • 3-buttonButtons

In Stock

Specifications

Genuine new 3-button proximity smart key for Lynk & Co 05 and 09 2023-2024, 433 MHz, ID8A, part 8890222241, HU101 blade included.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Genuine · OEM · New

Lynk & Co 05 and 09 2023-2024 Smart Key 3 Buttons

3 buttons · 433 MHz · ID8A transponder · HU101 blade included · 8890222241

3
Buttons
433 MHz
Frequency
ID8A
Transponder chip
HU101
Blade included

⭐ The Lynk & Co 05 and 09 2023-2024 smart key is a 3-button proximity key built to part number 8890222241, running at 433 MHz with an ID8A transponder and an HU101 emergency blade supplied inside the key. It is a genuine new unit that has never been coded to a vehicle. Listings run this key with an ATECH module on the 05 and a Delphi module on the 09, so compare the board in the original before ordering. It is built for locksmiths and key shops adding a spare key on this platform.

⚙️ Key features

3-button pad layout

A factory 3-button pad on a proximity housing, matching the layout supplied with the vehicle from new.

ID8A transponder on board

The ID8A immobiliser transponder is already fitted, so no separate chip has to be sourced, cloned or soldered for the job.

433 MHz radio section

Transmits on 433 MHz. Check the frequency of the original key before ordering, because this platform is built in more than one radio variant.

HU101 emergency blade

The HU101 blade ships inside the key and is cut to the vehicle door lock code at the bench before handover.

💎 Benefits

Factory part at a lower cost

A genuine new key keeps original electronics in the job while leaving margin against a dealer-supplied part.

Predictable registration

A factory module behaves the way the vehicle expects, which takes one variable out of a proximity key job.

Flexible build-up

The emergency blade arrives inside the key, so cutting and coding run in the same visit with no second order.

A newer platform worth stocking

Spare keys for recent models are hard to source locally, which makes this a useful line to hold on the shelf.

👥 Who it's for

Automotive locksmiths

Technicians coding proximity keys on newer platforms through a diagnostic tool.

Key shops and counter trade

Shops holding keys for newer models that dealers charge heavily for.

Used car dealers and garages

Traders making up a second key before the vehicle is handed over.

Key programming trainees

Technicians learning the coding routines used on newer proximity platforms.

🚗 Compatible vehicles

LYNK & CO 05 2023-2024 🔧 Listed with an ATECH module on this model
LYNK & CO 09 2023-2024 🔧 Listed with a Delphi module on this model
Before ordering, match part number 8890222241 and check the button count and the board maker against the original key. Other models in the range run a different key that is not interchangeable.

📦 What's included

✅ IN THE BOX

✔ 1 x genuine 3-button proximity smart key, part number 8890222241

✔ ID8A transponder fitted on the key board

✔ HU101 emergency key blade supplied inside the key, uncut

❌ NOT INCLUDED

✘ Blade cutting - cut the HU101 blade to the vehicle door lock code

✘ Spare battery - fit a fresh cell of the size used in this housing

✘ Programming to the vehicle - runs through the OBD-II port with a diagnostic tool

📋 Specifications

📡 REMOTE
FCC ID
Not published
IC
Not published
Part number
8890222241
Frequency
433 MHz
Buttons
3-button
🔐 TRANSPONDER & BLADE
Transponder chip
ID8A
Emergency key blade
Included, uncut
Blade profile
HU101
Proximity
Yes, keyless go
📦 PHYSICAL & POWER
Battery
Not published
Condition
New
Origin
Genuine · OEM
Weight
60 g
Color
Not specified

🛠️ Programming instructions

OBD PROGRAMMING - DIAGNOSTIC TOOL REQUIRED

This is a proximity smart key and it cannot be taught to the car by hand. The key is adapted to the vehicle over the OBD-II port, and the immobiliser data is read or calculated during the session.

Compatible tools: Lonsdor and OBDSTAR key programmers are the units usually named for this platform, with Autel and Xhorse coverage depending on the software version installed.
Add key (spare): with a working key present, open the key adaption routine for the model, then hold the new key at the start button when the tool asks for it.
All Keys Lost: treat it as a full adaption job. Have every key the customer keeps on the bench, because routines of this type usually rewrite the whole key list in one pass.
Before you start: fit a fresh battery, cut the HU101 blade so the door can still be opened, and keep a stable supply on the vehicle battery through the session.
Check coverage first: the menu path and step order depend on the tool brand and the software version. Verify the exact model year is in the tool's supported list before starting the job.

Frequently Asked Questions

Common questions about this product

It is the 3-button proximity key listed for the Lynk & Co 05 and 09 in 2023-2024 specification, on trims fitted with keyless go. Match the number and the button count against the original key before ordering this one.
This reference is listed with an ATECH module on the 05 and a Delphi module on the 09. The housing looks the same from the outside, so open the original key and compare the board before ordering a replacement for a job.
Yes. An ID8A transponder is already fitted on the key board, so no separate chip has to be sourced, cloned or soldered. The transponder is coded to the vehicle during the same adaption session as the remote functions.
Yes. An HU101 emergency blade is supplied inside the key and arrives uncut. Cut it to the vehicle door lock code before handover, because it is what opens the driver door if the key battery or the vehicle battery is flat.
Through the OBD-II port with a key programming tool. Lonsdor and OBDSTAR units are the ones usually named for this platform, while Autel and Xhorse coverage depends on the software version loaded on the tool, so check coverage before the job.
Not reliably. Other models in the range run a different key on another part number, so a key that looks similar from the outside is not interchangeable. Match part number 8890222241 against the original key from the same vehicle.
It is a genuine new factory key that has never been coded to a vehicle. It arrives ready to be cut and adapted, so the shop does the HU101 blade cutting and the coding together as one job at handover.
The cell size is not published for this housing, so fit a fresh battery of the size already used in the original key. No spare battery is supplied here, and a weak cell is a common cause of trouble during coding.

Last updated: 2 October 2026

Related lookups:Lynk & Co 05Lynk & Co 09