Skip to content
  1. Home
  2. Remote and Key Shell
  3. Smart Key Shell
  4. Mini Cooper 2014-2018 Smart Key Shell - 3-button · FCC NBGIDGNG1 - Aftermarket · New
Mini Cooper 2014-2018 Smart Key Shell - 3-button · FCC NBGIDGNG1 - Aftermarket · New

Mini Cooper 2014-2018 Smart Key Shell - 3-button · FCC NBGIDGNG1 - Aftermarket · New

Aftermarket

SKU: B02804

$8.42
AED  29.97

In Stock

Specifications

Aftermarket MINI Cooper smart key shell for 2014-2018 Cooper F-Series (FEM/BDC), shell only - no electronics. Replaces NBGIDGNG1.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Aftermarket · New

MINI Cooper 2014-2018 Smart Key Shell - 3-Button, HU100R

3-button · aftermarket replacement shell · no electronics, chip, or blade · HU100R profile · replaces NBGIDGNG1

3
Buttons
HU100R
Blade profile
No
Electronics
Replaces
NBGIDGNG1

⭐ This is an aftermarket replacement smart key shell for the MINI Cooper Cooper F-Series (FEM/BDC) (2014-2018), matching the NBGIDGNG1 proximity smart-key housing. It is an empty housing only - it carries no transponder chip, circuit board, battery, or cut blade, and is sized for a HU100R-profile blade. The customer's existing working parts transfer into it, so it restores a cracked, worn, or water-damaged smart key without reprogramming. Intended for locksmiths and key shops handling MINI Cooper shell-swap work.

⚙️ Key features

Direct-fit replacement housing

Moulded to match the NBGIDGNG1 MINI Cooper smart key so the original board, buttons, and blade transfer straight across without modification.

Restores a failed shell, not the electronics

Fixes the common failure - cracked case, worn button membrane, snapped blade slot - while the customer keeps their already-programmed electronics, so no key programming is needed.

Sized for a HU100R blade

Accepts a HU100R-profile blade (sold separately), cut to the customer's original bitting or copied from the old key.

💎 Benefits

Lower cost than a full key

Reusing the customer's working electronics turns a cracked MINI Cooper key into a shell swap instead of a new-key-and-programming job, protecting margin on a common repair.

No reprogramming downtime

Because the programmed board and chip carry over, the repaired key works the moment it's reassembled - a while-you-wait counter job rather than a bench programming session.

Low-cost stock line

A cheap, fast-moving spare for any shop already seeing MINI Cooper keys with cracked cases or worn buttons, with no license or tool dependency to hold it.

👥 Who it's for

Automotive locksmiths

Locksmiths refreshing worn or cracked MINI Cooper keys as a quick counter repair.

Key shops

Shops offering while-you-wait MINI Cooper shell swaps without touching the programmed electronics.

Garages and used-car dealers

Garages and dealers tidying up MINI Cooper keys on trade-in or workshop stock.

🚗 Compatible vehicles

MINI Cooper F-Series (FEM/BDC) - 2014-2018 NBGIDGNG1 proximity smart-key platforms -
This shell replaces the NBGIDGNG1 MINI FEM smart-key housing - match the FCC ID and HU100R blade profile against the customer's original before ordering.

📦 What's included

✅ IN THE BOX

✔ MINI Cooper smart key shell (3-button) - empty housing

✔ Button pad / key back as moulded

❌ NOT INCLUDED

✘ Transponder chip - transfer from the customer's original key

✘ Circuit board / remote electronics - transfer from the original

✘ Battery - reuse or replace separately

✘ Cut key blade (HU100R profile) - sold separately, cut to the original bitting

📋 Specifications

🧰 SHELL
Type
Smart Key Shell
Buttons
3
Blade profile
HU100R (blade sold separately)
FCC ID
NBGIDGNG1
🚗 FITMENT
Make
MINI Cooper
Vehicles
Cooper F-Series (FEM/BDC)
Years
2014-2018
Function
Proximity smart key
📦 PHYSICAL
Contents
Empty shell - no electronics
Condition
New, aftermarket
Chip
None - not included
Weight
60 g

🔧 Shell replacement - how to fit

🔑SHELL REPLACEMENT - TRANSFER YOUR PARTS

This is an empty replacement housing - it carries no electronics. Transfer the working parts from the customer's original MINI Cooper key into it; no reprogramming is needed when those parts are reused.

Open the original key split the customer's original MINI Cooper key and remove the circuit board, transponder chip, and battery.
Transfer the parts seat the board, chip, and battery into the new housing, then fit the button pad.
Fit the blade and test cut a HU100R-profile blade to the original bitting (or copy the old blade), fit it, then test every button and the immobiliser.
Confirm coverage first: no reprogramming is needed when the original programmed electronics are reused; a new key and programming are only required if the customer's original board or chip is lost or destroyed.

Frequently Asked Questions

Common questions about this product

No. This is an empty smart key shell only. It carries no transponder chip, circuit board, battery, or cut blade. Every working part transfers from the customer's original MINI Cooper key, which is exactly why no reprogramming is required afterward.
No, provided the customer's original board and transponder chip are transferred into the new shell. Because the already-programmed electronics carry over, the key works immediately once reassembled. Reprogramming is only needed if the original electronics are lost or destroyed.
It is sized for a HU100R-profile blade, sold separately. Cut the HU100R blade to the customer's original bitting or copy the old blade, then fit it into the housing before returning the finished MINI Cooper key to the customer.
It replaces the NBGIDGNG1 MINI Cooper key fitted to 2014-2018 models. Match that FCC ID and the HU100R blade profile against the customer's original before ordering, since a single vehicle family can span several different shells across trims and years.
No. It is an aftermarket replacement housing, not a genuine MINI Cooper-branded component. It is intended as a cost-effective shell swap for a cracked or worn key, reusing the customer's own programmed electronics rather than replacing the complete key assembly.
No. This smart key shell ships as an empty housing with no battery fitted. Reuse the battery from the customer's original key or fit a fresh coin cell of the same type when transferring the electronics across into the new shell.
Only when the customer's working OEM smart-key board and chip are transferred into it. The shell has no proximity electronics of its own, so keyless entry and push-to-start return once the original programmed board is moved across and the reassembled key is tested.

Last updated: 2 October 2026

Related lookups:FCC NBGIDGNG1Mini Cooper