Skip to content
  1. Home
  2. Remote and Key Shell
  3. Remote Key Shell
  4. Mitsubishi 2007-2012 Remote Head Key Shell - 3-button · PN 6370A535 - Aftermarket · New
Mitsubishi 2007-2012 Remote Head Key Shell - 3-button · PN 6370A535 - Aftermarket · New

Mitsubishi 2007-2012 Remote Head Key Shell - 3-button · PN 6370A535 - Aftermarket · New

Aftermarket

SKU: B02829

$2.80
AED  9.98

In Stock

Specifications

Aftermarket Mitsubishi remote head key shell for 2007-2012 models using the 6370A535 remote, shell only - no electronics. Replaces 6370A535.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Aftermarket · New

Mitsubishi 2007-2012 Remote Head Key Shell - 3-Button, MIT11R

3-button · aftermarket replacement shell · no electronics, chip, or blade · MIT11R profile · replaces 6370A535

3
Buttons
MIT11R
Blade profile
No
Electronics
Replaces
6370A535

⭐ This is an aftermarket replacement remote head key shell for the Mitsubishi models using the 6370A535 remote (2007-2012), matching the 6370A535 remote key housing. It is an empty housing only - it carries no transponder chip, circuit board, battery, or cut blade, and is sized for a MIT11R-profile blade. The customer's existing working parts transfer into it, so it restores a cracked, worn, or water-damaged key without reprogramming. Intended for locksmiths and key shops handling Mitsubishi shell-swap work.

⚙️ Key features

Direct-fit replacement housing

Moulded to match the 6370A535 Mitsubishi key so the original board, buttons, and blade transfer straight across without modification.

Restores a failed shell, not the electronics

Fixes the common failure - cracked case, worn button membrane, snapped blade slot - while the customer keeps their already-programmed electronics, so no key programming is needed.

Sized for a MIT11R blade

Accepts a MIT11R-profile blade (sold separately), cut to the customer's original bitting or copied from the old key.

💎 Benefits

Lower cost than a full key

Reusing the customer's working electronics turns a cracked Mitsubishi key into a shell swap instead of a new-key-and-programming job, protecting margin on a common repair.

No reprogramming downtime

Because the programmed board and chip carry over, the repaired key works the moment it's reassembled - a while-you-wait counter job rather than a bench programming session.

Low-cost stock line

A cheap, fast-moving spare for any shop already seeing Mitsubishi keys with cracked cases or worn buttons, with no license or tool dependency to hold it.

👥 Who it's for

Automotive locksmiths

Locksmiths refreshing worn or cracked Mitsubishi keys as a quick counter repair.

Key shops

Shops offering while-you-wait Mitsubishi shell swaps without touching the programmed electronics.

Garages and used-car dealers

Garages and dealers tidying up Mitsubishi keys on trade-in or workshop stock.

🚗 Compatible vehicles

MITSUBISHI 2007-2012 -
This is a housing only - check the button count, blade profile and the original part number 6370A535 against the customer's key before ordering, and transfer their working electronics into it.

📦 What's included

✅ IN THE BOX

✔ Mitsubishi remote head key shell (3-button) - empty housing

✔ Button pad / key back as moulded

❌ NOT INCLUDED

✘ Transponder chip - transfer from the customer's original key

✘ Circuit board / remote electronics - transfer from the original

✘ Battery - reuse or replace separately

✘ Cut key blade (MIT11R profile) - sold separately, cut to the original bitting

📋 Specifications

🧰 SHELL
Type
Remote Head Key Shell
Buttons
3
Blade profile
MIT11R (blade sold separately)
Part number
6370A535
🚗 FITMENT
Make
Mitsubishi
Vehicles
models using the 6370A535 remote
Years
2007-2012
Function
Remote key
📦 PHYSICAL
Contents
Empty shell - no electronics
Condition
New, aftermarket
Chip
None - not included
Weight
30 g

🔧 Shell replacement - how to fit

🔑SHELL REPLACEMENT - TRANSFER YOUR PARTS

This is an empty replacement housing - it carries no electronics. Transfer the working parts from the customer's original Mitsubishi key into it; no reprogramming is needed when those parts are reused.

Open the original key split the customer's original Mitsubishi key and remove the circuit board, transponder chip, and battery.
Transfer the parts seat the board, chip, and battery into the new housing, then fit the button pad.
Fit the blade and test cut a MIT11R-profile blade to the original bitting (or copy the old blade), fit it, then test every button and the immobiliser.
Check coverage first: no reprogramming is needed when the original programmed electronics are reused; a new key and programming are only required if the customer's original board or chip is lost or destroyed.

Frequently Asked Questions

Common questions about this product

No. This is an empty remote head key shell only. It carries no transponder chip, circuit board, battery, or cut blade. Every working part transfers from the customer's original Mitsubishi key, which is exactly why no reprogramming is required afterward.
No, provided the customer's original board and transponder chip are transferred into the new shell. Because the already-programmed electronics carry over, the key works immediately once reassembled. Reprogramming is only needed if the original electronics are lost or destroyed.
It is sized for a MIT11R-profile blade, sold separately. Cut the MIT11R blade to the customer's original bitting or copy the old blade, then fit it into the housing before returning the finished Mitsubishi key to the customer.
It replaces the 6370A535 Mitsubishi key fitted to 2007-2012 models. Match that Part number and the MIT11R blade profile against the customer's original before ordering, since a single vehicle family can span several different shells across trims and years.
No. It is an aftermarket replacement housing, not a genuine Mitsubishi-branded component. It is intended as a cost-effective shell swap for a cracked or worn key, reusing the customer's own programmed electronics rather than replacing the complete key assembly.
No. This remote head key shell ships as an empty housing with no battery fitted. Reuse the battery from the customer's original key or fit a fresh coin cell of the same type when transferring the electronics across into the new shell.

Last updated: 15 November 2026