Skip to content
  1. Home
  2. Auto Key Programming
  3. Adapters
  4. NXP Killer Adapter MCKB002 for Mazda 2012-2022 Smart Keys - Solder-Free WAZSKE13D01
NXP Killer Adapter MCKB002 for Mazda 2012-2022 Smart Keys - Solder-Free WAZSKE13D01

NXP Killer Adapter MCKB002 for Mazda 2012-2022 Smart Keys - Solder-Free WAZSKE13D01

Genuine new

SKU: B02209

$9.83
AED  35.00

Fits Mazda 2 2017–2021 ·

  • 315 / 433 MHzFrequency
  • ID49Transponder

In Stock

Specifications

Solder-free PCB adapter MCKB002 for the NXP Killer tool, cut for Mazda 2012-2022 smart key boards.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Genuine · New

NXP Killer Solder-Free Adapter MCKB002 for Mazda 2012-2022 Smart Keys

Solder-free PCB adapter · MCKB002 · HITAG Pro, ID49 (PCF7953P) · 315 MHz and 433 MHz · WAZSKE13D01 / WAZSKE13D02 · Mazda

MCKB002
Adapter model
Solder-free
Connection method
HITAG Pro
Target key chip
2012-2022
Model years

⭐ This is MCKB002, the solder-free contact board the NXP Killer uses to reach the Mazda smart key boards listed below. Contact is made through the five marked contacts (MSCL, MSDA, VCC, GND and WAKE) alone, which keeps the soldering iron away from the key board. The boards it serves carry HITAG Pro, ID49 (PCF7953P) at 315 MHz and 433 MHz. Look for WAZSKE13D01 or WAZSKE13D02 on the original board. It is an accessory board for professional bench work and has to be used with the NXP Killer device.

⚙️ Key features

Labelled contacts

Every pad is marked, which removes the guesswork of finding the clock and data points by eye.

No desoldering

Contact is made on the key board itself, so the transponder never leaves the PCB.

Board-specific fit

Cut for one key board footprint, so the contacts land where they should on the first attempt.

Bench-speed access

Working with the NXP Killer, a read runs around 20 seconds and a write around 30 seconds.

💎 Benefits

Lower skill barrier

A technician who does not solder to micro pitch can still run the job cleanly.

Wider service list

Adding one board footprint widens what the counter can quote on without new machinery.

Fewer comebacks

A board that was never heated behaves the same after the job as it did before it.

Keep the job in-house

Duplicate the key at your own bench instead of turning the customer away or sending the board out.

👥 Who it's for

Key shops and counter trade

Walk-in duplicate work without sending the board out.

Dealers and garages

In-house spare keys for used stock before the car goes on the forecourt.

Fleet workshops

Keeping spare keys on the shelf for vehicles that run every day.

Bench technicians in training

A safer way to learn key board work than practising with a soldering iron.

🚗 Compatible vehicles

🚘 MAZDA
22017-2021
32014-2019
62014-2022
CX-32015-2022
CX-52012-2020
CX-92016-2020
MX-5 Miata2017-2021
Before ordering, open the key and match the board layout plus WAZSKE13D01 or WAZSKE13D02 or a listed part number against this adapter. A make and model share several board revisions, and only the layout decides the fit.

📦 What's included

✅ IN THE BOX

✔ 1 x MCKB002 solder-free PCB adapter

❌ NOT INCLUDED

✘ NXP Killer programmer - ordered separately

✘ Other MCKB adapters - each board footprint needs its own

✘ Smart key, transponder or emergency blade - source separately

✘ Cable and power supply - shipped with the NXP Killer tool

📋 Specifications

🔌 ADAPTER
Model
MCKB002
Type
Solder-free PCB adapter
Connection
Five-pin header
Contact points
MSCL, MSDA, VCC, GND and WAKE
Works with
NXP Killer / Super NXP Killer
🔐 TARGET KEY BOARD
Chip family
NXP HITAG3
Transponder
HITAG Pro, ID49 (PCF7953P)
Frequency
315 MHz and 433 MHz
Host key buttons
2, 3 and 4 button
Model years
2012-2022
🔢 KEY BOARD REFERENCES
FCC ID
WAZSKE13D01
FCC ID
WAZSKE13D02
Part number
SKE13D-01
Part number
SKE13D-02
📦 PHYSICAL
Weight
100 g
Condition
Genuine · New
Quantity
1 piece

Frequently Asked Questions

Common questions about this product

MCKB002 is a solder-free PCB adapter that links a Mazda smart key board to the NXP Killer programmer. It makes contact on the key board itself, so the transponder is read and written without desoldering the chip. Nothing on the key board is heated or removed.
No. MCKB002 is a passive accessory that only carries signals between the key board and the programmer. You need the NXP Killer device itself to run any read, write or reset operation on the key. Check the board layout before you order.
MCKB002 covers 7 Mazda models, model years 2012-2022, from 2 and 3 through to MX-5 Miata. The full list is in the compatibility section on this page. Ask us to check the board before you place the order.
You need one adapter per board footprint, not one per car. MCKB002 covers a single key board layout, and other keys in the same range use different MCKB adapters. One adapter covers every key that shares that footprint.
The boards MCKB002 serves carry HITAG Pro, ID49 (PCF7953P) and run at 315 MHz and 433 MHz. The NXP Killer reads and writes that transponder directly through the adapter. The tool works on the NXP 29 series only.
No heat is applied, which is the whole point. Soldering onto a smart key board risks lifting the copper pads or cooking the transponder. MCKB002 seats on the existing contact points instead. No iron ever touches the pads.
Cloning a board through MCKB002 with the NXP Killer copies the original transponder data, so the duplicate is accepted without a fresh registration on the vehicle. The board is read, written and refitted in one session. Keep the original board until the duplicate is tested.
One MCKB002 adapter. The NXP Killer programmer, its cable and power supply, and any other MCKB adapters are all sold separately. The cable and supply ship with the tool itself. Check which other footprints your workload needs. It arrives as a bare board ready for the bench.