Skip to content
  1. Home
  2. Auto Key Programming
  3. Adapters
  4. NXP Killer Adapter MCKB007 for Toyota Smart Keys - Solder-Free PCB Adapter B3N2K2R
NXP Killer Adapter MCKB007 for Toyota Smart Keys - Solder-Free PCB Adapter B3N2K2R

NXP Killer Adapter MCKB007 for Toyota Smart Keys - Solder-Free PCB Adapter B3N2K2R

Genuine new

SKU: B02287

$9.83
AED  35.00

Fits Toyota Land Cruiser 2021–2024 ·

  • 433 MHzFrequency
  • ID4ATransponder

In Stock

Specifications

Solder-free PCB adapter MCKB007 for the NXP Killer tool, cut for Toyota smart key boards.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Genuine · New

NXP Killer Solder-Free Adapter MCKB007 for Toyota Smart Keys

Solder-free PCB adapter · MCKB007 · ID 4A · 433 MHz · Toyota

MCKB007
Adapter model
Solder-free
Connection method
ID 4A
Target key chip
2
Key buttons

⭐ MCKB007 is a solder-free PCB adapter for the NXP Killer key cloning tool, cut for the Toyota smart key boards listed below. It seats on the key board and picks up the five marked contacts (MSCL, MSDA, VCC, GND and WAKE), so the transponder is read and written in place. The boards it serves carry ID 4A at 433 MHz. The board is marked B3N2K2R. It is a bench accessory for automotive locksmiths and does nothing on its own without the NXP Killer programmer.

⚙️ Key features

Board-specific fit

Cut for one key board footprint, so the contacts land where they should on the first attempt.

Bench-speed access

Working with the NXP Killer, a read runs around 20 seconds and a write around 30 seconds.

Protects the board

No iron on the pads means no lifted copper and no heat-damaged transponder.

Held under spring pressure

The clamp keeps steady contact through the whole read and write cycle without a third hand.

💎 Benefits

Shorter bench time

The key is opened, cloned and reassembled in minutes rather than a full desolder and resolder cycle.

Less rework

A clean mechanical contact removes the main cause of scrapped key boards on this platform.

Pays back over jobs

One adapter serves an unlimited number of keys that share the same board layout.

Lower skill barrier

A technician who does not solder to micro pitch can still run the job cleanly.

👥 Who it's for

Automotive locksmiths

Bench cloning as part of a spare-key or duplicate service.

Key shops and counter trade

Walk-in duplicate work without sending the board out.

Dealers and garages

In-house spare keys for used stock before the car goes on the forecourt.

Fleet workshops

Keeping spare keys on the shelf for vehicles that run every day.

🚗 Compatible vehicles

🚘 TOYOTA
Land Cruiser2021-2024
Corolla
RAV4
GR Sport
Before ordering, open the key and match the board layout plus B3N2K2R or a listed part number against this adapter. A make and model share several board revisions, and only the layout decides the fit.

📦 What's included

✅ IN THE BOX

✔ 1 x MCKB007 solder-free PCB adapter

❌ NOT INCLUDED

✘ NXP Killer programmer - ordered separately

✘ Other MCKB adapters - each board footprint needs its own

✘ Smart key, transponder or emergency blade - source separately

✘ Cable and power supply - shipped with the NXP Killer tool

📋 Specifications

🔌 ADAPTER
Model
MCKB007
Type
Solder-free PCB adapter
Connection
Five-pin header
Contact points
MSCL, MSDA, VCC, GND and WAKE
Works with
NXP Killer / Super NXP Killer
🔐 TARGET KEY BOARD
Chip family
NXP NCF29XX
Transponder
ID 4A
Frequency
433 MHz
Host key buttons
2 and 4 button
Board marking
B3N2K2R
🔢 KEY BOARD REFERENCES
Part number
8990H-60401
Part number
8990H-60460
Part number
8990H-60471
Part number
8990H-60530
📦 PHYSICAL
Weight
100 g
Condition
Genuine · New
Quantity
1 piece

Frequently Asked Questions

Common questions about this product

MCKB007 is a solder-free PCB adapter that links a Toyota smart key board to the NXP Killer programmer. It makes contact on the key board itself, so the transponder is read and written without desoldering the chip. Nothing on the key board is heated or removed.
No. MCKB007 is a passive accessory that only carries signals between the key board and the programmer. You need the NXP Killer device itself to run any read, write or reset operation on the key. The adapter is a mechanical contact board and nothing more.
MCKB007 fits the Toyota smart key boards used on Land Cruiser, Corolla, RAV4, GR Sport. The badge on the car does not decide the fit. Ask us to check the board before you place the order. The layout on the bench is what settles it.
You need one adapter per board footprint, not one per car. MCKB007 covers a single key board layout, and other keys in the same range use different MCKB adapters. The numbers in the series are not interchangeable. One adapter covers every key that shares that footprint.
The boards MCKB007 serves carry ID 4A and run at 433 MHz. The NXP Killer reads and writes that transponder directly through the adapter. Read the marking printed on the original key board. The model name alone does not settle the variant.
No heat is applied, which is the whole point. Soldering onto a smart key board risks lifting the copper pads or cooking the transponder. MCKB007 seats on the existing contact points instead. The board goes back into the key untouched.
Cloning a board through MCKB007 with the NXP Killer copies the original transponder data, so the duplicate is accepted without a fresh registration on the vehicle. The board is read, written and refitted in one session. Keep the original board until the duplicate is tested.
One MCKB007 adapter. The NXP Killer programmer, its cable and power supply, and any other MCKB adapters are all sold separately. No key, chip or blade is supplied with it. The cable and supply ship with the tool itself.