Genuine new
SKU: B03590

Genuine new
SKU: B02554
Fits Changan CS85 Coupe 2019–2021 ·
In Stock
Specifications
| Specification | Value |
|---|---|
| Condition | Genuine Brand New |
| Country of Manufacture | China |
| Manufacturers | NXP Killer |
| Weight | 0.1 kg |
Solder-free PCB adapter MCKB098 for the NXP Killer tool, cut for Changan smart key boards.
Solder-free PCB adapter · MCKB098 · HITAG AES, ID 4A (NCF29AxM) · 433 MHz FSK · Changan
⭐ This is MCKB098, the solder-free contact board the NXP Killer uses to reach the Changan smart key boards listed below. It clamps onto the PCB and bridges the five marked contacts (MSCL, MSDA, VCC, GND and WAKE), so the chip stays where it is for the whole job. The board holds the key PCB with two spring-loaded clamp arms, plus a red flying lead that is placed on the Wake up point of the key board to wake the chip before a read. On this key, GND, SDA, VCC and SCL sit on the component face of the key board while Wake up sits on the battery face. The boards it serves carry HITAG AES, ID 4A (NCF29AxM) at 433 MHz FSK. It is a bench accessory for automotive locksmiths and does nothing on its own without the NXP Killer programmer.
No desoldering
Contact is made on the key board itself, so the transponder never leaves the PCB.
Board-specific fit
Cut for one key board footprint, so the contacts land where they should on the first attempt.
Bench-speed access
Working with the NXP Killer, a read runs around 20 seconds and a write around 30 seconds.
Protects the board
No iron on the pads means no lifted copper and no heat-damaged transponder.
Lower skill barrier
A technician who does not solder to micro pitch can still run the job cleanly.
Wider service list
Adding one board footprint widens what the counter can quote on without new machinery.
Fewer comebacks
A board that was never heated behaves the same after the job as it did before it.
Keep the job in-house
Duplicate the key at your own bench instead of turning the customer away or sending the board out.
Fleet workshops
Keeping spare keys on the shelf for vehicles that run every day.
Bench technicians in training
A safer way to learn key board work than practising with a soldering iron.
Mobile key services
A small board that travels in the case and needs no bench power of its own.
Automotive locksmiths
Bench cloning as part of a spare-key or duplicate service.
Common questions about this product
Last updated: 18 November 2026
Genuine new
SKU: B03590
Genuine new
SKU: B03952
Genuine new
SKU: B03591
Genuine new
SKU: B03953
Software
SKU: B03695
Software
SKU: B03652
Genuine new
SKU: B03586
Software
SKU: B03729
Software
SKU: B03722
Software
SKU: B03719