Skip to content
  1. Home
  2. Auto Key Programming
  3. Adapters
  4. OBDSTAR OBDII-16 Vehicle Connector (Red) - Spare Plug for X100 Pro, X100+, X200 Series Main Cable - Genuine · New
OBDSTAR OBDII-16 Vehicle Connector (Red) - Spare Plug for X100 Pro, X100+, X200 Series Main Cable - Genuine · New

OBDSTAR OBDII-16 Vehicle Connector (Red) - Spare Plug for X100 Pro, X100+, X200 Series Main Cable - Genuine · New

Genuine new

SKU: B04264

$14.04
AED  50.00

In Stock

Specifications

Red OBDSTAR OBDII-16 vehicle plug, a spare head for the X100 Pro, X100+, X200 and X200 Pro main cable.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Genuine · New

OBDSTAR OBDII-16 Vehicle Connector (Red)

16-pin OBD-II (SAE J1962) vehicle plug · red housing · spare head for the X100 / X200 series main cable

16-pin
OBD-II plug
Red
X100 / X200 version
Plug-on
Spare head
X100 Pro
Main fit

⭐ This red OBDSTAR OBDII-16 connector is the vehicle-side plug of the X100 and X200 series main cable, sold on its own as a spare. It joins the tool's main cable to the car's 16-pin diagnostic port, so a worn, bent or lost plug is replaced without buying a complete cable. The red housing marks the X100 / X200 version: the black OBDSTAR connector of the X300 family is a separate part and does not fit here.

⚙️ Key features

Standard 16-pin OBD-II plug

Mates with the SAE J1962 diagnostic port of the vehicle.

Red X100 / X200 version

Matched to the main cable of the X100 Pro, X100+, X200 and X200 Pro series.

Plug-on spare head

Replaces only the vehicle-side plug; the tool's main cable stays in service.

Made by OBDSTAR

The same plug the X100 / X200 series is supplied with.

💎 Benefits

No full cable needed

A damaged plug is swapped without replacing the whole main cable.

Back to work quickly

A spare in the kit keeps the X100 Pro working when a plug fails on a job.

Steady contact

Fresh pins end the dropped connections a worn plug causes.

Small kit spare

Fits in the tool case next to the main cable.

👥 Who it's for

OBDSTAR X100 / X200 owners

X100 Pro, X100+, X200 and X200 Pro users needing a new vehicle plug.

Mobile locksmiths

A spare plug in the van so a bent pin does not end the job.

Workshops

Restoring a known-good main cable with a fresh vehicle-side plug.

🧰 Supported coverage

🔩 FITS
OBDSTAR X100 Pro
Main cable vehicle plug
OBDSTAR X100+
Main cable vehicle plug
OBDSTAR X200 / X200 Pro
Main cable vehicle plug
🚫 NOT FOR
X300 DP, X300 Pro3, X300 Pro4
Use the black OBDII-16 connector
Key Master DP / DP Plus, Odo Master, P50
Use the black OBDII-16 connector
Check the colour and the plug of your current main cable before ordering: this red plug is for the X100 / X200 series only.

📦 What's included

✅ IN THE BOX

✔ 1 × OBDSTAR OBDII-16 vehicle connector, red

❌ NOT INCLUDED

✘ OBDSTAR main cable

✘ OBDSTAR X100 / X200 programmer

✘ Vehicle-specific adapters

📋 Specifications

🔌 CONNECTOR
Part
OBDII-16 vehicle connector
Colour
Red
Vehicle side
16-pin OBD-II (SAE J1962)
Tool side
OBDSTAR X100 / X200 series main cable
Use
Spare vehicle-side plug, not a complete cable
📦 GENERAL
Condition
Genuine · New
Brand
OBDSTAR

Frequently Asked Questions

Common questions about this product

The red OBDII-16 connector fits the main cable of the OBDSTAR X100 Pro, X100+, X200 and X200 Pro. It is the vehicle-side plug of that cable, so it replaces a worn, bent or lost plug and keeps the original main cable of the tool in service.
No. The X300 DP, X300 Pro3, X300 Pro4, Key Master DP and DP Plus, Odo Master and P50 use the black OBDSTAR OBDII-16 connector, listed separately. The red plug is made for the X100 / X200 series cable and is not interchangeable with the black one.
No. It is only the 16-pin plug that goes into the vehicle's diagnostic port. It has to be joined to the OBDSTAR main cable of the X100 or X200 tool, which is not included, and does not work as a standalone diagnostic adapter or reader.
The vehicle-side plug takes the most wear on a diagnostic cable: pins bend and contacts loosen from daily use. Replacing only the plug costs less than a complete main cable and puts the X100 Pro back to work as soon as the new plug is fitted.
It plugs into the standard 16-pin OBD-II diagnostic port, SAE J1962, found under the dashboard of most passenger cars. The vehicle and function coverage still depends on the X100 or X200 tool and its software, not on the connector itself.
Yes. It is a genuine OBDSTAR connector, the same red vehicle plug the X100 / X200 series is supplied with. It keeps the original fit on the main cable and contacts, so the connection to the car behaves like the plug that came with the tool.
Push the plug straight into the vehicle port and pull it out by the housing, never by the cable. Keep it covered in the tool case between jobs and check the pins for bends or dirt, because a damaged pin causes dropped communication during a job.

Last updated: 10 November 2026