Skip to content
  1. Home
  2. Remote and Key Shell
  3. Remote Key Shell
  4. Opel Vauxhall Ampera 2011-2014 Flip Remote Key Shell 5-button - HU100 Blade Included - Aftermarket
Opel Vauxhall Ampera 2011-2014 Flip Remote Key Shell 5-button - HU100 Blade Included - Aftermarket

Opel Vauxhall Ampera 2011-2014 Flip Remote Key Shell 5-button - HU100 Blade Included - Aftermarket

Aftermarket

SKU: B09120

$1.69
AED  6.00

Fits Opel Ampera 2011–2014 ·

In Stock

Specifications

Aftermarket 5 button flip remote key shell for Opel and Vauxhall Ampera 2011-2014, key 22822309. New uncut HU100 blade included, no electronics.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Aftermarket · New

Opel Vauxhall Ampera 2011-2014 Flip Remote Key Shell 5 Buttons

Shell only · 5 buttons · HU100 blade included · for key 22822309 · no electronics

Shell only
No board, chip or battery
5
Buttons on the housing
HU100
New uncut blade
40 g
Shipping weight

⭐ The Ampera key spends its life folding in and out of a pocket, and the hinge and the case give up long before the electronics do. This is a replacement flip remote key shell for the Opel and Vauxhall Ampera built between 2011 and 2014, matching the five button key catalogued under part number 22822309. A new uncut HU100 blade is supplied with it. The housing is empty: no circuit board, no transponder and no battery, so the customer own electronics move across on the bench and the key keeps working exactly as it did.

⚙️ Key features

Full flip housing

Upper and lower case, button pad and hinge assembly, so a worn flip mechanism is replaced rather than patched.

New uncut HU100 blade

The Opel HU100 blade is supplied uncut, ready to cut on standard tooling most shops already have on the bench.

Electronics move across

The customer own board and transponder are transferred in, so the key stays paired to the car and no programming is involved.

💎 Benefits

Repair instead of replace

A tired shell no longer means a new key. The programmed electronics are kept, which removes both the part cost and the registration cost.

Bench job, no car needed

Nothing is connected to the vehicle. The board swaps over and the blade is cut, so the customer waits rather than books in.

Cuts on tooling you own

HU100 is a standard Opel profile on code cutters and Lishi decoders, so no extra equipment is needed for the job.

👥 Who it's for

Automotive locksmiths

Flip case replacement on Opel and Vauxhall keys brought in worn or cracked.

Key shops

Counter stock for owners whose key still works but whose case has failed.

Repair benches

Hinge and button pad replacement where the board is sound.

🚗 Compatible vehicles

OPEL Ampera 2011-2014 five button flip key 22822309
VAUXHALL Ampera 2011-2014 five button flip key 22822309
A shell is matched to the key, not to the car. Before ordering, check the customer key carries part number 22822309, has five buttons and takes an HU100 blade.

📦 What's included

✅ IN THE BOX

✔ 1 x aftermarket 5 button flip remote key shell

✔ Upper and lower housing with the button pad and hinge

✔ New uncut HU100 flip blade

❌ NOT INCLUDED

✘ Circuit board - transfer the board from the customer existing key

✘ Transponder chip - it stays on the original board, nothing to program

✘ Battery - fit a fresh cell while the case is open

✘ Key cutting - the HU100 blade arrives uncut, cut it to the vehicle

📋 Specifications

🧩 SHELL
Product type
Flip remote key shell
Buttons
5
Host key part number
22822309
Housing type
Flip out, hinged
🗝️ BLADE
Blade profile
HU100
Blade condition
New, uncut
Blade type
Flip out, fitted
Cutting required
Yes, to the vehicle
🔐 CONTENTS
Circuit board
Not included
Transponder chip
Not included
Battery
Not included
Programming
Not applicable
📦 PHYSICAL
Weight
40 g
Condition
New
Origin
Aftermarket
Match by
Key part number and button count

🛠️ Programming instructions

NO PROGRAMMING NEEDED - BENCH SWAP AND CUT

A shell carries no electronics, so nothing is learned to the vehicle. The work is transferring the board and cutting the new HU100 blade to the car.

Open the original key: split the case, release the blade from the hinge pin, and lift out the board with the transponder before removing the button pad.
Transfer the parts: fit the board and button pad into the new housing, set the blade on the hinge pin and check the flip action opens and locks cleanly.
Cut the blade: cut the HU100 blank to the vehicle by code or by decoding the door lock, deburr it, then test it in the lock before handover.
If the blade will not stay folded: the hinge pin is usually not fully seated or the spring has been fitted the wrong way round. Reopen the case and check both before suspecting the new housing.

Frequently Asked Questions

Common questions about this product

No. This is a flip shell only, with no circuit board, no transponder and no battery. The customer existing electronics are transferred into the new housing on the bench, which is why the key keeps its pairing and needs no programming afterwards.
No. A new uncut HU100 blade is supplied with the shell. Cut it to the vehicle by code or by decoding the door lock, then deburr it and check the flip action before the key is handed back to the customer.
It is the five button flip housing for the Opel and Vauxhall Ampera built between 2011 and 2014, matching the key catalogued as 22822309. A shell is matched to the key rather than the car, so check that number before ordering.
No. The transponder moves across on the original board, so the vehicle still recognises the key and no registration is required. The only work involved is the bench swap itself and cutting the new HU100 blade to the customer car.
Not for the shell. A housing has no electronics, so whatever transponder sits on the original board simply moves across into it. What decides fitment is the key part number 22822309, the five button layout and the HU100 blade slot.
Almost certainly. HU100 is the standard Opel and Vauxhall profile carried by code cutters and Lishi decoders, so no extra tooling is needed. Cut the blank from the key code or by decoding the driver door lock on the bench.
Check that the hinge pin is fully seated and that the spring went back the right way round, since those two account for nearly every flip action that feels loose after a shell swap rather than any fault in the new housing.
No. This is an aftermarket replacement shell built to match the 22822309 key housing, not a dealer supplied part. It is intended for professional bench work by a locksmith or a key shop rather than counter sale to a driver.

Last updated: 2 October 2026