Skip to content
  1. Home
  2. Remote and Key Shell
  3. Smart Key Shell
  4. Suzuki Grand Vitara SX4 2008–2015 Smart Key Shell - 2-button - Aftermarket · New
Suzuki Grand Vitara SX4 2008–2015 Smart Key Shell - 2-button - Aftermarket · New

Suzuki Grand Vitara SX4 2008–2015 Smart Key Shell - 2-button - Aftermarket · New

Aftermarket

SKU: B06382

$7.01
AED  24.97

Fits Suzuki Grand Vitara 2008–2015 ·

In Stock

Specifications

Aftermarket 2-button smart key shell for Suzuki Grand Vitara and SX4 2008–2015, export spec. HU133 blade slot, shell only - no electronics, chip or cut blade.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Aftermarket · New

Suzuki 2008–2015 Smart Key Shell - 2-Button, HU133

2-button · aftermarket replacement smart-key shell · no electronics, chip, or blade · HU133 blade slot · replaces 37172-62JV0

2
Buttons
HU133
Blade profile
No
Electronics
Replaces
37172-62JV0

⭐ This is an aftermarket two-button smart key shell for the Suzuki Grand Vitara and SX4 in European and Middle East export specification, matching the 37172-62JV0 housing marked TS001. The body is the flat card-style Suzuki key of that era, supplied empty - no board, no transponder, no battery, no emergency blade. TS001 is a Suzuki type code rather than an FCC grant identifier, so it is published here as a marking to match rather than as a compliance code.

⚙️ Key features

Direct-fit replacement housing

Moulded to match the 37172-62JV0 Suzuki smart key so the original board, buttons, and blade transfer straight across without modification.

Restores a failed shell, not the electronics

Fixes the common failure - cracked case, worn button membrane, snapped blade slot - while the customer keeps their already-programmed electronics, so no key programming is needed.

Sized for a HU133 blade

Accepts a HU133-profile blade (sold separately), cut to the customer's original bitting or copied from the old key.

💎 Benefits

Lower cost than a full key

Reusing the customer's working electronics turns a cracked Suzuki key into a shell swap instead of a new-key-and-programming job, protecting margin on a common repair.

No reprogramming downtime

Because the programmed board and chip carry over, the repaired key works the moment it's reassembled - a while-you-wait counter job rather than a bench programming session.

Low-cost stock line

A cheap, fast-moving spare for any shop already seeing Suzuki keys with cracked cases or worn buttons, with no license or tool dependency to hold it.

👥 Who it's for

Automotive locksmiths

Locksmiths refreshing worn or cracked Suzuki keys as a quick counter repair.

Key shops

Shops offering while-you-wait Suzuki shell swaps without touching the programmed electronics.

Garages and used-car dealers

Garages and dealers tidying up Suzuki keys on trade-in or workshop stock.

🚗 Compatible vehicles

GRAND VITARA Grand Vitara (JT) - 2008–2015, 37172-62JV0 two-button smart-key platforms, European and Middle East export spec -
SX4 SX4 - 2008–2013, 37172-62JV0 two-button smart-key platforms, European and Middle East export spec -
The marking TS001 on the original housing is a Suzuki type code, not an FCC grant identifier. Match that marking, the part number and the flat card-style body against the customer's key before ordering.

📦 What's included

✅ IN THE BOX

✔ Suzuki smart key shell (2-button) - empty housing

✔ Button pad / key back as moulded

❌ NOT INCLUDED

✘ Transponder chip - transfer from the customer's original key

✘ Circuit board / remote electronics - transfer from the original

✘ Battery - reuse or replace separately

✘ Cut key blade (HU133 profile) - sold separately, cut to the original bitting

📋 Specifications

🧰 SHELL
Type
Smart Key Shell
Buttons
2
Blade profile
HU133 (blade sold separately)
Part number
37172-62JV0
Type number
TS001 (manufacturer reference, not an FCC ID)
🚗 FITMENT
Make
Suzuki
Vehicles
Grand Vitara / SX4
Years
2008–2015
Function
Proximity smart key
Market
European and Middle East export specification
📦 PHYSICAL
Contents
Empty shell - no electronics
Condition
New, aftermarket
Chip
None - not included
Weight
30 g

🔧 Shell replacement - how to fit

🔑SHELL REPLACEMENT - TRANSFER YOUR PARTS

This is an empty replacement housing - it carries no electronics. Transfer the working parts from the customer's original Suzuki key into it; no reprogramming is needed when those parts are reused.

Open the original key split the customer's original Suzuki key and remove the circuit board, transponder chip, and battery.
Transfer the parts seat the board, chip, and battery into the new housing, then fit the button pad.
Fit the blade and test cut a HU133-profile blade to the original bitting (or copy the old blade), fit it, then test every button and the immobiliser.
Verify coverage first: no reprogramming is needed when the original programmed electronics are reused; a new key and programming are only required if the customer's original board or chip is lost or destroyed.

Frequently Asked Questions

Common questions about this product

No. This is an empty smart key shell only. It carries no transponder chip, circuit board, battery, or cut blade. Every working part transfers from the customer's original Suzuki key, which is exactly why no reprogramming is required afterward.
No, provided the customer's original board and transponder chip are transferred into the new shell. Because the already-programmed electronics carry over, the key works immediately once reassembled. Reprogramming is only needed if the original electronics are lost or destroyed.
It is sized for a HU133-profile blade, sold separately. Cut the HU133 blade to the customer's original bitting or copy the old blade, then fit it into the housing before returning the finished Suzuki key to the customer.
It replaces the 37172-62JV0 two-button smart key fitted to the Grand Vitara and SX4 in European and Middle East export specification, marked TS001 on the original housing. Match the part number and body shape against the customer's key before ordering.
No. TS001 is a Suzuki manufacturer type code, not an FCC grant identifier, and it does not resolve in public FCC records. It appears on the original housing purely as a factory reference and is used here only as a physical matching mark.
No. This smart key shell ships as an empty housing with no battery fitted. Reuse the battery from the customer's original key or fit a fresh coin cell of the same type when transferring the electronics across into the new shell.
Only when the customer's working OEM smart-key board and chip are transferred into it. The shell has no proximity electronics of its own, so keyless entry and push-to-start return once the original programmed board is moved across and the reassembled key is tested.

Last updated: 2 October 2026