Skip to content

Buick Enclave 2010–2012 Key Fob & Car Keys

Keys that fit the 2010–2012 Buick Enclave: smart keys, remote keys and transponder keys, 3, 4 or 5 buttons, FCC ID 0UC60221 or 0UC60270, ID46 (HITAG 2) or NXP PCF7936AA chip, 315 MHz. 10 compatible keys, remotes & shells (genuine and aftermarket) available for the 2010 Buick Enclave.

Last updated: 15 November 2026

Key specifications for the Buick Enclave 2010–2012

Key types
smart keys, remote keys, transponder keys, key shells and key blanks
Frequency
315 MHz
Buttons
3-, 4- and 5-button
Transponder chip
ID46 (HITAG 2) · NXP PCF7936AA
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Buick parts catalogue, with the specifications on each listing. Every remote listed for the Buick Enclave 2010–2012 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Buick Enclave 2010 key

Key with a blade (regular or flip)

2 tools list this key. 1 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • Launch X-431 IMMO
    • Add key

All keys lost is listed by OBDSTAR Key Master G3. Launch X-431 IMMO lists add key only.

Programming steps

Add key - on the car(US / Canada cars)

Needs: one working key, new key cut to the vehicle

  1. Cut the new key to the vehicle; have one key that already starts it.
  2. Put the working key in the ignition and turn it to ON/RUN (or start the engine), then turn it to LOCK/OFF and remove it.
  3. Within five seconds insert the new key and turn it to ON/RUN.
  4. The security light goes off when the key is learned (this can be too fast to notice).
  5. Start the engine with the new key; for each further key repeat from step 2.
Watch out: Adds only; never erases keys. Up to 10 keys (2009 and 2015 manuals).

Without a tool

The remote is programmed on the car, without a tool. Up to 8 remotes.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: the key, all remotes to be kept

  1. Bring every remote the customer keeps; all of them must be matched in the same session.
  2. Key in, ignition ON, transmission in Park.
  3. With DIC buttons: press the vehicle information button until RELEARN REMOTE KEY shows, then press set/reset until REMOTE KEY LEARNING ACTIVE shows.
  4. Without DIC buttons: press the trip odometer reset stem until RELEARN REMOTE KEY shows, then hold it about 3 seconds until REMOTE KEY LEARNING ACTIVE shows.
  5. Hold lock and unlock together on the first remote for about 15 seconds; a chime confirms it.
  6. Repeat step 5 for each remote (up to eight).
  7. Turn the ignition to LOCK/OFF to leave, then test all remotes.
Watch out: Remotes not matched in this session stop working. On memory-seat vehicles the first remote matched becomes driver 1, the second driver 2.

When the key changed

Smart key (push to start)

  • 2018 - 2020Chip: ID46433 MHzBlade: HU100FCC: HYQ4EA(US / Canada cars)2021-2024 fobs carry HYQ4ES: chip not settled, read the old key.

Key with a blade (regular or flip)

  • 2008 - 2017This yearChip: ID46Blade: B111(US / Canada cars)Circle Plus key; separate remote.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Buick Enclave 2010–2012?

10 listings fit the Buick Enclave 2010–2012: smart keys, remote keys, transponder keys, key shells and key blanks, in 3-, 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Buick Enclave 2010–2012 remote use?

Every remote listed for the Buick Enclave 2010–2012 transmits on 315 MHz.

Which transponder chip does the Buick Enclave 2010–2012 key use?

The listings for this car carry: ID46 (HITAG 2) · NXP PCF7936AA. Check the chip in each listing's specifications.

Which FCC IDs do Buick Enclave 2010–2012 remotes carry?

The remotes listed for this car carry FCC ID 0UC60221 and 0UC60270. Match it with the FCC ID printed on your original remote.

Which tools program a Buick Enclave 2010–2012 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 and Launch X-431 IMMO for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.

Can the Buick Enclave 2010–2012 remote be programmed without a tool?

The remote is programmed on the car, without a tool. Up to 8 remotes.