Cadillac DTS 2008–2011 Key Fob & Car Keys
Keys that fit the 2008–2011 Cadillac DTS: smart keys, remote keys and transponder keys, 4 or 5 buttons, FCC ID 0UC6000066, ID46 (HITAG 2) or NXP PCF7936AA chip, 315 MHz. 6 compatible keys, remotes & shells (genuine and aftermarket) available for the 2008 Cadillac DTS.
Last updated: 15 November 2026
Key specifications for the Cadillac DTS 2008–2011
- Key types
- smart keys, remote keys, transponder keys, key shells and key blanks
- Frequency
- 315 MHz
- Buttons
- 4- and 5-button
- Transponder chip
- ID46 (HITAG 2) · NXP PCF7936AA
- Part numbers
- 20998254
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Cadillac parts catalogue, with the specifications on each listing. Every remote listed for the Cadillac DTS 2008–2011 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $14.04In Stock
- $1.40In Stock
- Cadillac CTS / CTS-V / DTS 2008-2014 Keyless Entry Remote Shell 5-button with Remote Start
SKU: B01419
$4.21In Stock - $14.04In Stock
- $28.09In Stock
Programming the Cadillac DTS 2008 key
Key with a blade (regular or flip)
4 tools list this key. 3 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
PIN read function - All keys lost
- Launch X-431 IMMO
- Add key
All keys lost is listed by OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Lonsdor K518. Launch X-431 IMMO lists add key only.
Programming steps
Add key - on the car(US / Canada cars)
Needs: one working key, new key cut to the vehicle
- Cut the new key to the vehicle; have one key that already starts it.
- Put the working key in the ignition and turn it to ON/RUN (or start the engine), then turn it to LOCK/OFF and remove it.
- Within five seconds insert the new key and turn it to ON/RUN.
- The security light goes off when the key is learned (this can be too fast to notice).
- Start the engine with the new key; for each further key repeat from step 2.
All keys lost - on the car(US / Canada cars)
Needs: new key cut to the vehicle, 30 minutes
- Cut the new key. Have every key the customer keeps; the old keys stop working at the end.
- Insert the new key and turn to ON/RUN without cranking; the security light comes on.
- Wait about 10 minutes until the security light goes off, then turn to LOCK/OFF.
- Repeat ON/RUN, wait 10 minutes, LOCK/OFF two more times (about 30 minutes in all).
- After the third cycle turn OFF, then start the engine with this key: it is learned and every previously known key is erased.
- Learn the remaining keys with the add-key procedure.
Without a tool
The remote is programmed on the car, without a tool. No working key is needed. Up to 8 remotes.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: the key, all remotes to be kept
- Bring every remote the customer keeps; all of them must be matched in the same session.
- Key in, ignition ON, transmission in Park.
- With DIC buttons: press the vehicle information button until RELEARN REMOTE KEY shows, then press set/reset until REMOTE KEY LEARNING ACTIVE shows.
- Without DIC buttons: press the trip odometer reset stem until RELEARN REMOTE KEY shows, then hold it about 3 seconds until REMOTE KEY LEARNING ACTIVE shows.
- Hold lock and unlock together on the first remote for about 15 seconds; a chime confirms it.
- Repeat step 5 for each remote (up to eight).
- Turn the ignition to LOCK/OFF to leave, then test all remotes.
When the key changed
Key with a blade (regular or flip)
- 2006 - 2011This yearChip: ID46Blade: B111(US / Canada cars)Circle Plus key; separate remote.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Cadillac DTS 2008–2011?
6 listings fit the Cadillac DTS 2008–2011: smart keys, remote keys, transponder keys, key shells and key blanks, in 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Cadillac DTS 2008–2011 remote use?
Every remote listed for the Cadillac DTS 2008–2011 transmits on 315 MHz.
Which transponder chip does the Cadillac DTS 2008–2011 key use?
The listings for this car carry: ID46 (HITAG 2) · NXP PCF7936AA. Check the chip in each listing's specifications.
Which FCC IDs do Cadillac DTS 2008–2011 remotes carry?
The remotes listed for this car carry FCC ID 0UC6000066. Match it with the FCC ID printed on your original remote.
Which tools program a Cadillac DTS 2008–2011 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Lonsdor K518 and Launch X-431 IMMO for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Cadillac DTS 2008–2011 remote be programmed without a tool?
The remote is programmed on the car, without a tool. No working key is needed. Up to 8 remotes.





