Skip to content

Chevrolet Equinox 2008–2009 Key Fob & Car Keys

Keys that fit the 2008–2009 Chevrolet Equinox: smart keys, remote keys and transponder keys, 3 buttons, FCC ID 0UC60221 or 0UC60270, ID46 (HITAG 2) or NXP PCF7936AA chip, 315 MHz. 5 compatible keys, remotes & shells (genuine and aftermarket) available for the 2008 Chevrolet Equinox.

Last updated: 15 November 2026

Key specifications for the Chevrolet Equinox 2008–2009

Key types
smart keys, remote keys, transponder keys, key shells and key blanks
Frequency
315 MHz
Buttons
3-button
Transponder chip
ID46 (HITAG 2) · NXP PCF7936AA
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Chevrolet parts catalogue, with the specifications on each listing. Every remote listed for the Chevrolet Equinox 2008–2009 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Chevrolet Equinox 2008 key

Key with a blade (regular or flip)

4 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
  • Launch X-431 IMMO
    • Add key
    • Add key

All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Launch X-431 IMMO and Lonsdor K518 list add key only.

Programming steps

Add key - on the car(US / Canada cars)

Needs: one working key, new key cut to the vehicle

  1. Cut the new key to the vehicle; have one key that already starts it.
  2. Put the working key in the ignition and turn it to ON/RUN (or start the engine), then turn it to LOCK/OFF and remove it.
  3. Within five seconds insert the new key and turn it to ON/RUN.
  4. The security light goes off when the key is learned (this can be too fast to notice).
  5. Start the engine with the new key; for each further key repeat from step 2.
Watch out: Adds only; never erases keys. Up to nine extra keys (2009 manual).

Without a tool

The remote is programmed on the car, without a tool. Up to 8 remotes.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: the key, all remotes to be kept

  1. Bring every remote the customer keeps; all of them must be matched in the same session.
  2. Key in, ignition ON, transmission in Park.
  3. Press the vehicle information button until LEARN REMOTE KEY shows, then press set/reset until REMOTE KEY LEARNING ACTIVE shows.
  4. Hold lock and unlock together on the first remote for about 15 seconds; a chime confirms it.
  5. Repeat step 4 for each remote (up to four).
  6. Turn the key to LOCK/OFF to leave, then test all remotes.
Watch out: Remotes not matched in this session stop working. Up to four remotes (2009 manual).

When the key changed

Smart key (push to start)

  • 2018 - 2021Chip: ID46Blade: HU100FCC: HYQ4AAHYQ4AA is the 315 MHz fob; 433 MHz fobs exist: read the FCC ID.

Key with a blade (regular or flip)

  • 2005 - 2006Chip: None (PassLock)(US / Canada cars)No chip in the key; PassLock sensor sits in the ignition lock.
  • 2007 - 2009This yearChip: ID46Blade: B111(US / Canada cars)Circle Plus key.
  • 2010 - 2017Chip: ID46 Hitag2 Extended315 MHzBlade: HU100FCC: OHT01060512(US / Canada cars)Flip remote key; remote and transponder learn together.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Chevrolet Equinox 2008–2009?

5 listings fit the Chevrolet Equinox 2008–2009: smart keys, remote keys, transponder keys, key shells and key blanks, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Chevrolet Equinox 2008–2009 remote use?

Every remote listed for the Chevrolet Equinox 2008–2009 transmits on 315 MHz.

Which transponder chip does the Chevrolet Equinox 2008–2009 key use?

The listings for this car carry: ID46 (HITAG 2) · NXP PCF7936AA. Check the chip in each listing's specifications.

Which FCC IDs do Chevrolet Equinox 2008–2009 remotes carry?

The remotes listed for this car carry FCC ID 0UC60221 and 0UC60270. Match it with the FCC ID printed on your original remote.

Which tools program a Chevrolet Equinox 2008–2009 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Launch X-431 IMMO and Lonsdor K518 for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Chevrolet Equinox 2008–2009 remote be programmed without a tool?

The remote is programmed on the car, without a tool. Up to 8 remotes.