Skip to content

Chevrolet Impala 2012 Key Fob & Car Keys

Keys that fit the 2006–2013 Chevrolet Impala: transponder keys, ID46 (HITAG 2) or NXP PCF7936AA chip. 2 compatible keys, remotes & shells (genuine and aftermarket) available for the 2012 Chevrolet Impala.

Last updated: 18 November 2026

Key specifications for the Chevrolet Impala 2006–2013

Key types
transponder keys and key blanks
Transponder chip
ID46 (HITAG 2) · NXP PCF7936AA

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Chevrolet parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Chevrolet Impala 2012 key

Key with a blade (regular or flip)

3 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
  • Launch X-431 IMMO
    • Add key

All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Launch X-431 IMMO lists add key only.

Programming steps

Add key - on the car(US / Canada cars)

Needs: one original programmed key that starts the car, a new key already cut to the car

  1. Insert the original programmed key and start the engine.
  2. Once the engine runs, turn the key OFF and remove it.
  3. No more than 10 seconds after pulling the original key, insert the new key and switch it to ON.
  4. The security light goes out when the new key is learned; this can happen too fast to see the light come on.
  5. On cars without a security light (2004 to 2007 Grand Prix, Bonneville, Impala), leave the key at ON for 10 minutes 45 seconds to be sure it is learned.
  6. For each extra key, repeat all the steps from the start with the original key.
Watch out: The gap between pulling the original key and switching the new key ON must not exceed 10 seconds.
Add key - on the car(US / Canada cars)

Needs: one working key, new key cut to the vehicle

  1. Cut the new key to the vehicle; have one key that already starts it.
  2. Put the working key in the ignition and turn it to ON/RUN (or start the engine), then turn it to LOCK/OFF and remove it.
  3. Within five seconds insert the new key and turn it to ON/RUN.
  4. The security light goes off when the key is learned (this can be too fast to notice).
  5. Start the engine with the new key; for each further key repeat from step 2.
Watch out: Adds only; never erases keys. Up to 10 keys (2009-2013 manuals).

Without a tool

The remote is not programmed on the car by hand: it needs a tool or a dealer.

When the key changed

Smart key (push to start)

  • 2014 - 2020Chip: ID46Blade: HU100(US / Canada cars)Proximity flip key, push-to-start trims only.

Key with a blade (regular or flip)

  • 2001 - 2005Chip: None (PassLock)(US / Canada cars)No chip in the key; PassLock sensor sits in the ignition lock.
  • 2006 - 2013This yearChip: ID46Blade: B111(US / Canada cars)Circle Plus key; separate remote.
  • 2014 - 2020Chip: ID46 Hitag2 Extended315 MHzBlade: HU100FCC: OHT01060512(US / Canada cars)Flip key on key-start cars.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Chevrolet Impala 2006–2013?

2 listings fit the Chevrolet Impala 2006–2013: transponder keys and key blanks. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which transponder chip does the Chevrolet Impala 2006–2013 key use?

The listings for this car carry: ID46 (HITAG 2) · NXP PCF7936AA. Check the chip in each listing's specifications.

Which tools program a Chevrolet Impala 2006–2013 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Chevrolet Impala 2006–2013 remote be programmed without a tool?

The remote is not programmed on the car by hand: it needs a tool or a dealer.