Skip to content

Dodge Grand Caravan 2008–2010 Key Fob & Car Keys

Keys that fit the 2008–2010 Dodge Grand Caravan: remote keys and transponder keys, 2, 3 or 5 buttons, FCC ID IYZC01C or M3N5WY783X, PCF7941 or NXP PCF7936AA chip, 433 MHz. 13 compatible keys, remotes & shells (genuine and aftermarket) available for the 2008 Dodge Grand Caravan.

Last updated: 15 November 2026

Key specifications for the Dodge Grand Caravan 2008–2010

Key types
remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
433 MHz
Buttons
2-, 3-, 5-, 6- and 7-button
Transponder chip
PCF7941 · NXP PCF7936AA
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Dodge parts catalogue, with the specifications on each listing. Every remote listed for the Dodge Grand Caravan 2008–2010 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Dodge Grand Caravan 2008 key

Smart key (push to start)

One tool lists this key.

Key with a blade (regular or flip)

2 tools list this key. 1 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
    • Add key
    PIN read function

All keys lost is listed by OBDSTAR Key Master G3. Lonsdor K518 lists add key only.

Programming steps

Add key - on the car(US / Canada cars)

Needs: Two working key fobiks available, two working programmed key fobiks, the new key fobik

  1. Insert the first working key fobik and turn the ignition ON for at least 3 but no more than 15 seconds.
  2. Turn to LOCK/OFF and pull the key fobik out.
  3. Within 15 seconds, insert the second working key fobik and turn ON. After 10 seconds a chime may sound and the Vehicle Security Light starts flashing.
  4. Turn to LOCK/OFF and pull the key fobik out.
  5. Within 60 seconds, insert the new key fobik and turn ON.
  6. After 10 seconds a single chime sounds, the Vehicle Security Light stops flashing, stays on for 3 seconds and goes out: the new key fobik is programmed.
  7. Repeat the whole procedure for each extra key fobik.
Watch out: The first key must stay ON 3 to 15 seconds, the second key goes in within 15 seconds and the new key within 60 seconds. Up to 8 keys can be programmed. The remote (RKE) part of the new fobik is programmed in the same procedure. Once programmed, the new fobik can never be programmed to another car.
Add key - on the car(US / Canada cars)

Needs: two working Fobiks, new blank Fobik

  1. Have the new (never programmed) Fobik ready; have two different Fobiks that already start the vehicle.
  2. Insert the first working Fobik and turn to ON for at least 3 but no more than 15 seconds, then turn OFF and remove it.
  3. Within 15 seconds insert the second working Fobik and turn to ON; after about 10 seconds a chime sounds and the security light flashes. Turn OFF and remove it.
  4. Within 60 seconds (stay under 50 to be safe) insert the new blank Fobik and turn to ON.
  5. After about 10 seconds a single chime sounds, the light stops flashing, stays on about 3 seconds and goes off: the Fobik is learned.
  6. For each further Fobik start again from step 2.
Watch out: Needs two different working keys; with one key or none use a tool (it reads the PIN). The new Fobik must be blank: one already learned to another vehicle is refused. Up to eight keys. On a remote head key or Fobik the remote learns in the same procedure. The customer learn works only on US-market vehicles; a GCC or export car needs a tool.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Remote

Without a tool

The remote is programmed on the car, without a tool. It takes two working keys.

When the key changed

Key with a blade (regular or flip)

  • 2001 - 2003Chip: 4D-64Blade: Y160Sentry Key (SKIM) optional; cars without it start on a cut key.
  • 2004 - 2007Chip: ID46Blade: Y164FCC: M3N5WY72XXRemote head key (SKREEM); US remote heads are 315 MHz.
  • 2008 - 2020This yearChip: ID46433 MHzFCC: IYZ-C01C, M3N5WY783XFobik: the fob goes into the dash slot and turns, no blade.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Dodge Grand Caravan 2008–2010?

13 listings fit the Dodge Grand Caravan 2008–2010: remote keys, transponder keys, key shells, emergency blades and key blanks, in 2-, 3-, 5-, 6- and 7-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Dodge Grand Caravan 2008–2010 remote use?

Every remote listed for the Dodge Grand Caravan 2008–2010 transmits on 433 MHz.

Which transponder chip does the Dodge Grand Caravan 2008–2010 key use?

The listings for this car carry: PCF7941 · NXP PCF7936AA. Check the chip in each listing's specifications.

Which FCC IDs do Dodge Grand Caravan 2008–2010 remotes carry?

The remotes listed for this car carry FCC ID IYZC01C and M3N5WY783X. Match it with the FCC ID printed on your original remote.

Which tools program a Dodge Grand Caravan 2008–2010 key?

The tool makers' coverage lists name Lonsdor K518, OBDSTAR Key Master G3 and Launch X-431 IMMO for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.

Can the Dodge Grand Caravan 2008–2010 remote be programmed without a tool?

The remote is programmed on the car, without a tool. It takes two working keys.