Dodge Magnum 2008 Key Fob & Car Keys
Keys that fit the 2008 Dodge Magnum: smart keys, remote keys and transponder keys, 3, 4 or 5 buttons, FCC ID IYZC01C or M3N5WY783X, ID46 (HITAG 2) or NXP PCF7936AA chip, 433 MHz. 10 compatible keys, remotes & shells (genuine and aftermarket) available for the 2008 Dodge Magnum.
Last updated: 15 November 2026
Key specifications for the Dodge Magnum 2008
- Key types
- smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 433 MHz
- Buttons
- 3-, 4- and 5-button
- Transponder chip
- ID46 (HITAG 2) · NXP PCF7936AA
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Dodge parts catalogue, with the specifications on each listing. Every remote listed for the Dodge Magnum 2008 transmits on 433 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $2.24In Stock
- $1.12In Stock
Programming the Dodge Magnum 2008 key
Key with a blade (regular or flip)
3 tools list this key. 2 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
PIN read function - Advanced Diagnostics Smart Pro
- Add key
All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Advanced Diagnostics Smart Pro lists add key only.
Programming steps
Add key - on the car(US / Canada cars)
Needs: Two working transmitter keys available, two working programmed transmitter keys, the new transmitter key
- Insert the first working transmitter key and turn ON (no cranking) for at least 3 but no more than 15 seconds, then OFF and pull it out.
- Within 15 seconds, insert the second working key and turn ON. After 10 seconds a tone sounds and the immobilizer lamp flashes.
- Turn OFF and pull the second key out.
- Within 60 seconds, insert the new key and turn ON. After 10 seconds a tone sounds and the immobilizer lamp stays on for 3 seconds.
- Turn OFF, pull the key and test it. Repeat the procedure for each extra key.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
- Remote
PIN read function
Without a tool
The remote is not programmed on the car by hand: it needs a tool or a dealer.
When the key changed
Key with a blade (regular or flip)
- 2005 - 2007Chip: ID46Blade: Y164FCC: KOBDT04ARemote head key (SKREEM); US remote heads are 315 MHz.
- 2008This yearChip: ID46433 MHzFCC: IYZ-C01CFobik: the fob goes into the dash slot and turns, no blade.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Dodge Magnum 2008?
10 listings fit the Dodge Magnum 2008: smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 3-, 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Dodge Magnum 2008 remote use?
Every remote listed for the Dodge Magnum 2008 transmits on 433 MHz.
Which transponder chip does the Dodge Magnum 2008 key use?
The listings for this car carry: ID46 (HITAG 2) · NXP PCF7936AA. Check the chip in each listing's specifications.
Which FCC IDs do Dodge Magnum 2008 remotes carry?
The remotes listed for this car carry FCC ID IYZC01C and M3N5WY783X. Match it with the FCC ID printed on your original remote.
Which tools program a Dodge Magnum 2008 key?
The tool makers' coverage lists name Lonsdor K518, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Advanced Diagnostics Smart Pro and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Dodge Magnum 2008 remote be programmed without a tool?
The remote is not programmed on the car by hand: it needs a tool or a dealer.









