Dodge Neon 2004 Key Fob & Car Keys
Keys that fit the 2000–2005 Dodge Neon: smart keys, remote keys and transponder keys, 4 buttons, FCC ID GQ43VT9T, 315 MHz. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2004 Dodge Neon.
Last updated: 9 November 2026
Key specifications for the Dodge Neon 2000–2005
- Key types
- smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 315 MHz
- Buttons
- 4-button
- Part numbers
- 04759008
- Battery
- 2× CR2016
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Dodge parts catalogue, with the specifications on each listing. Every remote listed for the Dodge Neon 2000–2005 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $5.62In Stock
- Chrysler / Dodge / Jeep 2000-2006 Keyless Entry Remote Shell 4-button with Trunk and Panic
SKU: B02390
$1.12In Stock - $1.12In Stock
Programming the Dodge Neon 2004 key
Key with a blade (regular or flip)
3 tools list this key. 2 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
reads the PIN by OBD · all keys lost on the bench - Add key
- Remote
PIN read function
All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Lonsdor K518 lists add key only.
Programming steps
Add key - on the car(US / Canada cars)
Needs: two working keys, new blank transponder key cut to the vehicle
- Cut the new (never programmed) transponder key to the ignition; have two different keys that already start the vehicle.
- Insert the first working key and turn to ON for at least 3 but no more than 15 seconds, then turn OFF and remove it.
- Within 15 seconds insert the second working key and turn to ON; after about 10 seconds a chime sounds and the security light flashes. Turn OFF and remove it.
- Within 60 seconds (stay under 50 to be safe) insert the new blank key and turn to ON.
- After about 10 seconds a single chime sounds, the light stops flashing, stays on about 3 seconds and goes off: the key is learned.
- For each further key start again from step 2.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Remote
Without a tool
The remote is programmed on the car, without a tool.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: one working remote, the key, all remotes to be kept
- Bring every remote the customer keeps, including at least one that already works; entering the mode erases all remotes.
- Key in the ignition, switch to ON (do not start the engine).
- On a working remote hold UNLOCK, wait 4 to 10 seconds, then also press PANIC for about one second and release both together; a chime confirms programming mode.
- Within 30 seconds press UNLOCK on the same remote; a chime confirms it.
- Within 30 seconds press UNLOCK on each further remote in turn (old and new); a chime confirms each one.
- Switch the ignition OFF to leave the mode, then test every remote.
When the key changed
Key with a blade (regular or flip)
- 2000 - 2005This yearChip: 4D-64Blade: Y160Sentry Key (SKIM) optional; cars without it start on a cut key.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Dodge Neon 2000–2005?
4 listings fit the Dodge Neon 2000–2005: smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Dodge Neon 2000–2005 remote use?
Every remote listed for the Dodge Neon 2000–2005 transmits on 315 MHz.
Which FCC IDs do Dodge Neon 2000–2005 remotes carry?
The remotes listed for this car carry FCC ID GQ43VT9T. Match it with the FCC ID printed on your original remote.
Which tools program a Dodge Neon 2000–2005 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Lonsdor K518 and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Dodge Neon 2000–2005 remote be programmed without a tool?
The remote is programmed on the car, without a tool.



