Skip to content

Ford F-150 2017 Key Fob & Car Keys

Keys that fit the 2017 Ford F-150: smart keys, flip keys and remote keys, 2, 3 or 4 buttons, FCC ID N5FA08TAA, M3NA2C31243300 or M3NA2C31243800, Texas 4D-63 (128-bit) ID49 or ID49 (HITAG Pro) chip, 315 MHz, 433 MHz or 868 MHz. 33 compatible keys, remotes & shells (genuine and aftermarket) available for the 2017 Ford F-150.

Last updated: 17 November 2026

Key specifications for the Ford F-150 2017

Key types
smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz, 433 MHz, 868 MHz and 902 MHz
Buttons
2-, 3-, 4- and 5-button
Transponder chip
Texas 4D-63 (128-bit) ID49 · ID49 (HITAG Pro) · PCF7939FA
Blade profile
HU101
Part numbers
164-R8111 · 164-R8130 · HC3T-15K601-CD · HC3T-15K601-AB · FL3T-15K601-CH · 357141-00302 · FL3T-15K601-FA · 164-R7989
Battery
CR2032 · CR2450

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Ford parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz, 433 MHz, 868 MHz and 902 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Ford F-150 2017 key

Smart key (push to start)

5 tools list this key. 1 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3. Advanced Diagnostics Smart Pro lists add key only.

Programming steps

Add key - on the car(US / Canada cars)

Needs: two working Intelligent Access keys, new Intelligent Access key

  1. Make sure the vehicle is off and find the backup slot (the slot or pad where a key is placed to start with a flat fob battery).
  2. Put the first working key in the backup slot and press START/STOP; wait five seconds and press START/STOP again.
  3. Remove the key; within 10 seconds put the second working key in the slot and press START/STOP.
  4. Wait five seconds, press START/STOP again and remove the key.
  5. Put the new key in the backup slot and press START/STOP.
  6. Check the remote buttons and that the new key starts the engine; if it failed, wait 10 seconds and repeat from step 2.
Watch out: Maximum four Intelligent Access keys. Do the whole sequence within about 30 seconds; out of order, wait one minute and restart.
Add key - on the car(US / Canada cars)

Needs: Smart key (Intelligent Access, push-button start) system, two working programmed smart keys inside the car, the new unprogrammed smart key(s) within reach

  1. With the car off and every door closed, place the first programmed smart key in the backup slot (bottom of the cup holder or inside the center console) and press START/STOP.
  2. Wait five seconds, then press START/STOP again.
  3. Take the first key out of the backup slot.
  4. Within 10 seconds, place the second programmed smart key in the backup slot and press START/STOP.
  5. Wait five seconds, then press START/STOP again.
  6. Take the second key out.
  7. Wait five seconds, then place the new smart key in the backup slot and press START/STOP.
  8. Check that the new key starts the car and that its remote buttons work.
Watch out: All doors must stay closed for the whole procedure, and every step must be done within 30 seconds of starting. A step done out of order means stopping and waiting at least one minute before starting again. If the new key does not work, wait 10 seconds and repeat steps 1 to 7. Up to 4 intelligent access keys can be programmed.

Key with a blade (regular or flip)

2 tools list this key. 2 of them list all keys lost.

  • Advanced Diagnostics Smart Pro
    • Add key
    • All keys lost
    • Remote
    online calculation
    Needs: AD ADC2000 cable
  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    no PIN needed

Programming steps

Add key - on the car(US / Canada cars)

Needs: two working keys, new transponder key cut to the vehicle

  1. Cut the new SecuriLock key (or flip / integrated keyhead key) to the vehicle and keep it next to two keys that already start the engine.
  2. Put the first working key in the ignition, switch to ON for 3 to 10 seconds, then switch OFF and pull it out.
  3. Within 10 seconds put the second working key in, switch to ON for 3 to 10 seconds, then OFF and pull it out.
  4. Within 10 seconds put the new key in and switch to ON; leave it on for at least 6 seconds.
  5. Check: the theft light comes on for about 3 seconds and goes out, and the new key starts the engine. A flashing theft light means it was not learned.
  6. For each extra key wait about 20 seconds and start again from step 2.
Watch out: Needs two different keys that already start the car; one key, a copied (cloned) key or no key means tool work. Maximum eight keys on the vehicle. If it fails twice, stop and use a tool instead of repeating.
Add key - on the car(US / Canada cars)

Needs: Flip key (turned ignition key) system, two working programmed keys, a new key cut to the car (new key or valet key)

  1. Insert the first programmed key and turn the ignition from OFF to ON. Keep it ON for at least 1 second and no more than 10 seconds.
  2. Turn the ignition back to OFF and take the first key out.
  3. After 3 seconds but within 10 seconds of taking it out, insert the second programmed key and turn OFF to ON. Keep it ON for 1 to 10 seconds.
  4. Turn the ignition back to OFF and take the second key out.
  5. After 3 seconds but within 10 seconds of taking it out, insert the new key and turn OFF to ON. Keep it ON for 1 to 10 seconds. The new key is now programmed.
  6. For each more new key, repeat steps 1 to 5.
  7. Check that each new key starts the engine and works the remote functions.
Watch out: Up to eight keys can be programmed to the car. Each key stays ON for 1 to 10 seconds, and the next key goes in after 3 seconds but within 10 seconds of the previous one coming out.

Without a tool

The remote is programmed on the car, without a tool. Up to 8 remotes.

When the key changed

Smart key (push to start)

  • 2015 - 2021This yearChip: ID49Push-to-start trims only.

Key with a blade (regular or flip)

  • 1999 - 2003Chip: 4CBlade: H75(US / Canada cars)
  • 2004 - 2010Chip: 4D-63Blade: H75(US / Canada cars)40-bit version. 2004 Heritage (old body) uses the 4C key.
  • 2011 - 2014Chip: 4D-63315 MHzBlade: H75FCC: CWTWB1U793(US / Canada cars)80-bit version; a 40-bit key will not program.
  • 2015 - 2020This yearChip: ID49Blade: HU101FCC: N5F-A08TAA, N5F-A08TDA(US / Canada cars)315 and 902 MHz flip keys exist: check the FCC id.
  • from 2021Chip: ID49Blade: HU198FCC: N5F-A08TAA(US / Canada cars)Center-mill HU198 blade. Frequency differs by fob.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Ford F-150 2017?

33 listings fit the Ford F-150 2017: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2-, 3-, 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Ford F-150 2017 remote use?

Listings for the Ford F-150 2017 come in 315 MHz, 433 MHz, 868 MHz and 902 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Ford F-150 2017 key use?

The listings for this car carry: Texas 4D-63 (128-bit) ID49 · ID49 (HITAG Pro) · PCF7939FA. Check the chip in each listing's specifications.

Which FCC IDs do Ford F-150 2017 remotes carry?

The remotes listed for this car carry FCC ID H92PT, M3NA2C31243300, M3NA2C31243800, M3NA2C39434903, M3NA2C93142300, M3NA2C931426, N5FA08TAA and N5FA08TDA. Match it with the FCC ID printed on your original remote.

Which blade profile does the Ford F-150 2017 key use?

The blades listed for this car: HU101.

Which tools program a Ford F-150 2017 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Advanced Diagnostics Smart Pro, Autel KM100 (IKEY universal smart key), Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Ford F-150 2017 remote be programmed without a tool?

The remote is programmed on the car, without a tool. Up to 8 remotes.