Skip to content
  1. Home
  2. Keys and Remotes
  3. Remote Keys
  4. Ford F-Series 2015-2022 Flip Remote Key 4-button - 868MHz - HU101 Blade - ID49 - 357141-00302
Ford F-Series 2015-2022 Flip Remote Key 4-button - 868MHz - HU101 Blade - ID49 - 357141-00302

Ford F-Series 2015-2022 Flip Remote Key 4-button - 868MHz - HU101 Blade - ID49 - 357141-00302

Aftermarket

SKU: B08985

$14.04
AED  50.00

Fits Ford F-150 2015–2022 ·

  • 868 MHzFrequency
  • ID49Transponder
  • 4-buttonButtons

In Stock

Specifications

Aftermarket 4 button flip remote key for Ford F-Series 2015-2022. 868 MHz, ID49 chip fitted, new uncut HU101 blade, part number 357141-00302.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Aftermarket · New

Ford F-Series 2015-2022 Flip Remote Key 4 Buttons 868 MHz

4 buttons · 868 MHz · ID49 (HITAG Pro) · HU101 blade · 357141-00302 · F-150 and Super Duty

868 MHz
Operating frequency
4
Buttons with remote start
ID49
Transponder installed
HU101
Uncut blade profile

⭐ The Ford F-Series 2015-2022 flip remote key is an aftermarket 4 button remote head key transmitting on 868 MHz, built for GCC and European specification F-150 and Super Duty trucks in the 357141-00302 housing layout. It carries an ID49 (HITAG Pro) transponder in the head and a new uncut HU101 blade, so one part covers the immobiliser, the remote and the mechanical key. The button set is lock, unlock, remote start and panic. It ships unprogrammed and uncut, for locksmiths and key shops who cut and learn the key to the vehicle.

⚙️ Key features

868 MHz board

Transmits on 868 MHz for Ford trucks built to GCC and European specification. Lock, unlock, remote start and panic sit on one housing.

ID49 transponder fitted

A HITAG Pro ID49 chip sits in the head, so the same unit answers the immobiliser and the remote receiver on 2015-2022 platforms.

New uncut HU101 blade

A new uncut HU101 flip blade arrives fitted to the housing, ready to cut on a standard code machine or by Lishi decode.

💎 Benefits

One part finishes the job

Chip, remote and blade arrive together, so a spare key job runs without sourcing three separate components from three orders.

Cuts on tooling you own

HU101 is a standard profile on code cutters and Lishi decoders, so no Ford specific tooling is added to the van for this key.

Covers a high volume platform

F-150 and Super Duty run in large numbers across the region, so shelf stock of this housing turns over on repeat counter work.

👥 Who it's for

Automotive locksmiths

Spare key and lost key work on GCC and European specification Ford pickups.

Key shops

Counter stock for walk-in F-Series duplicate and second key requests.

Fleet and workshop operators

Replacement keys for pickup fleets kept and maintained in-house.

🚗 Compatible vehicles

🚙 FORD
F-1502015-2022
F-250 Super Duty2017-2022
F-350 Super Duty2017-2022
F-450 Super Duty2017-2022
F-550 Super Duty2017-2022
Fitment depends on the frequency the truck left the factory with. Before ordering, check the vehicle is on 868 MHz and match the part number 357141-00302 and the 4 button layout printed on the original key.

📦 What's included

✅ IN THE BOX

✔ 1 x 4 button flip remote key, 868 MHz

✔ ID49 (HITAG Pro) transponder chip, installed

✔ New uncut HU101 flip blade, fitted to the housing

❌ NOT INCLUDED

✘ Key cutting - the blade arrives uncut, cut it to the vehicle before use

✘ Programming - the key ships unlearned, program it on-board or by OBD

✘ Diagnostic tool or PATS access code - source separately for lost key work

✘ Ford packaging - supplied as an aftermarket part without an OEM box

📋 Specifications

📡 REMOTE
Frequency
868 MHz
Buttons
4
Button layout
Lock / Unlock / Remote start / Panic
Part number
357141-00302
🔐 TRANSPONDER & BLADE
Transponder chip
ID49 (HITAG Pro)
Blade profile
HU101
Blade condition
New, uncut
Blade type
Flip out, fitted
🔑 PRODUCT TYPE
Key type
Flip remote key
Proximity function
Not applicable
Ignition
Mechanical turn key
Cutting required
Yes, HU101
📦 PHYSICAL & POWER
Battery
CR2032
Weight
60 g
Condition
New
Origin
Aftermarket

🛠️ Programming instructions

ON-BOARD PROGRAMMING - REQUIRES TWO WORKING KEYS
Insert the first programmed key, turn to ON for 3 seconds, turn OFF and remove it.
Within 10 seconds, insert the second programmed key, turn to ON for 3 seconds, then OFF and remove it.
Within 20 seconds, insert the new key and turn to ON for at least 3 seconds. The security light goes out when the transponder is accepted.
Turn OFF and remove the key. The transponder side is now learned.
For the remote side, close all doors, insert any programmed key and cycle the ignition OFF to ON eight times within ten seconds, ending in ON.
The door locks cycle to signal the truck has entered remote learning mode.
Within 20 seconds press any button on the new remote. The locks cycle again to signal it was accepted.
Turn the ignition OFF to exit, then test lock, unlock, remote start and panic.
OBD PROGRAMMING - ONE KEY OR ALL KEYS LOST

On-board learning is blocked when the truck has fewer than two working keys. Those jobs run through the OBD-II port against the PATS immobiliser.

Compatible tools: Autel IM508 or IM608 with the APB131 adapter, Xhorse VVDI Key Tool Plus, OBDSTAR, or Ford FDRS with an authorised PATS access code.
Add key with one working key: the tool writes the new key to PATS over OBD-II. A security wait period applies on many model years before the write is accepted.
All keys lost: 2015 and later trucks generally need BCM data recovered first, read in the vehicle with an adapter such as APB131 or on the bench, then the new key is written.
Check coverage first: procedures and tool support vary by model year, region and software version. Verify the exact vehicle in the tool's coverage list before starting the job.

Frequently Asked Questions

Common questions about this product

No. This Ford F-Series flip remote key carries part number 357141-00302 and is the 868 MHz variant supplied for GCC and European specification trucks. North America F-150 and Super Duty models run a different frequency under FL3T-15K601-CH, so check the frequency the vehicle left the factory with.
An ID49 chip, the HITAG Pro family used across Ford platforms from 2015 onward, is already installed in the head of the 357141-00302 housing. No separate chip has to be sourced, cloned or soldered in, so the key is ready to learn.
No. The blade on this 357141-00302 flip remote key ships new and uncut, already fitted into the housing. Cut it by code or by decoding the lock with a Lishi HU101 tool before handover. Standard HU101 tooling applies, so nothing Ford specific is needed.
Only if the truck already has two working keys. With two keys the transponder and the remote can both be learned on-board through the ignition cycle. With one key or none, the 357141-00302 replacement is written through the OBD-II port.
Autel IM508 or IM608 with the APB131 adapter, Xhorse VVDI Key Tool Plus, OBDSTAR platforms and Ford FDRS with an authorised PATS code are used on this F-Series flip remote key. On 2015 and later trucks the BCM data usually has to be recovered first.
A single CR2032 lithium coin cell powers this Ford F-Series flip remote key. The case opens at the seam for replacement without removing the blade or the transponder. Fit a fresh cell before handover, so weak range is not mistaken for a fault.
Yes. The button layout on this 357141-00302 housing is lock, unlock, remote start and panic. Match it against the customer original, because a three button housing does not carry the remote start channel and swapping button counts leaves that function unavailable after the key has been programmed.
Verified fitment for 357141-00302 covers the Ford F-150 2015-2022 and the F-250, F-350, F-450 and F-550 Super Duty 2017-2022, on trucks specified with the 868 MHz remote system. Other Ford platforms use the same housing at different frequencies, so read the printed number first.

Last updated: 6 November 2026