Skip to content
  1. Home
  2. Keys and Remotes
  3. Remote Keys
  4. Kia Sorento 2013-2015 Flip Remote Key 4-button 315MHz - TQ8-RKE-3F05 95430-1U500
Kia Sorento 2013-2015 Flip Remote Key 4-button 315MHz - TQ8-RKE-3F05 95430-1U500

Kia Sorento 2013-2015 Flip Remote Key 4-button 315MHz - TQ8-RKE-3F05 95430-1U500

Used original

SKU: B08900

$21.07
AED  75.00
  • 315 MHzFrequency
  • 4-buttonButtons

In Stock

Specifications

Genuine used 4-button flip remote key for Kia Sorento 2013-2015, 315 MHz, FCC ID TQ8-RKE-3F05, part 95430-1U500. No chip and no blade.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Genuine · OEM · Used

Kia Sorento 2013-2015 Flip Remote Key 4 Buttons

4 buttons · 315 MHz · FCC ID TQ8-RKE-3F05 · IC 5074A-RKE3F05 · 95430-1U500 · no chip, no blade

4
Buttons
315 MHz
Frequency
3F05
TQ8-RKE-3F05
Used
Genuine factory unit

⭐ The Kia Sorento 2013-2015 flip remote key is a 4-button keyless entry remote built to part number 95430-1U500, running at 315 MHz under FCC ID TQ8-RKE-3F05 and IC 5074A-RKE3F05. This is a genuine factory unit in used condition, supplied without a transponder chip and without a key blade. The same approval number TQ8-RKE-3F05 is also printed on the Kia Rio flip remote 95430-1W003, so the part number is the deciding reference. It suits locksmiths and key shops replacing a lost or broken Sorento remote on a working ignition.

⚙️ Key features

315 MHz radio section

Transmits on 315 MHz, the frequency used on the North American Sorento. Check the marking on the original remote before ordering.

4-button pad layout

Lock, unlock, hatch and panic on the factory pad, matching the button layout of the original 95430-1U500 remote.

Genuine factory board

A factory-built remote carrying the original FCC ID and IC markings, pulled from stock rather than reproduced.

Serviceable CR2032 cell

Runs on a common CR2032 lithium cell that is replaced from the back of the housing without opening the board.

💎 Benefits

Factory part at a lower cost

A used genuine remote keeps the original electronics in the job while leaving margin against a dealer-supplied part.

Predictable radio behaviour

Factory boards register the way the vehicle expects, which removes the guesswork that a mismatched replacement can bring.

Flexible build-up

Supplied without a blade, so the housing is finished with the blade already matched to the customer vehicle.

Steady replacement demand

The Sorento of this generation is still on the road in volume, which keeps the reference moving off the shelf.

👥 Who it's for

Automotive locksmiths

Technicians registering keyless entry remotes on Kia through a diagnostic tool.

Key shops and counter trade

Shops that build up a flip housing with their own blade stock at the counter.

Used car dealers and garages

Traders making up a second remote before a Sorento is handed over.

Fleet and rental workshops

Operators keeping older Sorento units in service with factory replacement remotes.

🚗 Compatible vehicles

KIA Sorento 2013-2015 🔧 XM facelift, North American 315 MHz build, trims with a turn ignition and no immobiliser in the key
Before ordering, match FCC ID TQ8-RKE-3F05 and part number 95430-1U500 printed on the original remote. The same approval number is also used on a Kia Rio remote with a different part number.

📦 What's included

✅ IN THE BOX

✔ 1 x genuine 4-button flip remote key, part number 95430-1U500

✔ Factory housing with the original FCC ID and IC markings

✔ Used genuine unit, supplied without original packaging

❌ NOT INCLUDED

✘ Key blade - source a blade matched to the original key and cut it

✘ Transponder chip - no immobiliser chip is fitted to this remote

✘ CR2032 battery - fit a fresh cell before the registration

✘ Programming to the vehicle - runs through the OBD-II port with a diagnostic tool

📋 Specifications

📡 REMOTE
FCC ID
TQ8-RKE-3F05
IC
5074A-RKE3F05
Part number
95430-1U500
Frequency
315 MHz
Buttons
4-button: lock, unlock, hatch, panic
🔑 PRODUCT TYPE
Key type
Flip remote key
Transponder chip
Not included
Key blade
Not included
Blade profile
Not published
Proximity
Not applicable
📦 PHYSICAL & POWER
Battery
CR2032
Condition
Used
Origin
Genuine · OEM
Weight
60 g
Color
Not specified
🔢 PART NUMBER REFERENCES
95430-1U500 this part
95430-1W003 same FCC ID, different remote

🛠️ Programming instructions

OBD PROGRAMMING - DIAGNOSTIC TOOL REQUIRED

Kia did not give the 2013-2015 Sorento a self-programming sequence, so there is no door-and-ignition routine that registers this remote. Registration runs through the OBD-II port.

Compatible tools: Autel IM508 and IM608, Xhorse VVDI Key Tool Plus, OBDSTAR key programmers and Launch X431 IMMO units all list Kia keyless entry remote registration over OBD.
Adding a remote: select the Sorento by model year, enter the remote registration routine, then press the button the tool asks for on each remote in turn while the routine is open.
Program every remote together: the routine writes the full remote list in one pass, so have each remote the customer keeps on hand and register them all in the same session.
Before you start: fit a fresh CR2032, build the blade into the housing so the customer can still open the door, and keep a stable supply on the vehicle battery.
Check coverage first: the menu path and step order depend on the tool brand and the software version. Verify the exact model year is in the tool's supported list before starting the job.

Frequently Asked Questions

Common questions about this product

No. FCC ID TQ8-RKE-3F05 is also printed on the Kia Rio flip remote 95430-1W003. The approval number covers the radio module only, so the part number 95430-1U500 marked on the original remote is the deciding reference here. Match it before ordering.
No. This 95430-1U500 remote is supplied with no transponder chip fitted. It handles lock, unlock, hatch and panic only, and it will not start a vehicle that needs an immobiliser chip inside the key head, so check the car first.
No blade is supplied. The flip housing arrives empty, so match a blade against the customer original key on the bench, fit it into the housing, then cut it to the vehicle door lock code before handover to the customer.
No. Kia did not build the 2013-2015 Sorento with a self-programming sequence, so no door and ignition routine exists. The 95430-1U500 remote is registered through the OBD-II port with a key programming tool instead, which means a locksmith visit.
It is listed for the Kia Sorento across 2013-2015 in North American 315 MHz specification. Match the part number and the FCC ID printed on the original remote before ordering, because the Kia Rio remote uses the same approval number on a different part.
It is a genuine factory unit in used condition, pulled from service rather than reproduced. The housing and button pad may carry light handling marks, and the remote ships without the original packaging, dealer paperwork or a battery.
It takes a CR2032 lithium cell, changed from the back of the housing. A battery is not supplied, so fit a fresh one before registration, because a weak cell is a common reason a remote is not seen by the tool.
The pad on this Kia Sorento remote gives lock, unlock, rear hatch and panic. That matches the factory layout for 95430-1U500, so a car built with a three-button remote will show one unused function on this four-button pad.

Last updated: 6 November 2026