Skip to content
  1. Home
  2. Keys and Remotes
  3. Remote Keys
  4. Kia Sportage 2012-2013 Flip Remote Key 3-button 315MHz - NYOSEKSAM11ATX 95430-3W700
Kia Sportage 2012-2013 Flip Remote Key 3-button 315MHz - NYOSEKSAM11ATX 95430-3W700

Kia Sportage 2012-2013 Flip Remote Key 3-button 315MHz - NYOSEKSAM11ATX 95430-3W700

Used original

SKU: B08903

$18.26
AED  65.00
  • 315 MHzFrequency
  • 3-buttonButtons

In Stock

Specifications

Genuine used 3-button flip remote key for Kia Sportage 2012-2013, 315 MHz, FCC ID NYOSEKSAM11ATX, part 95430-3W700. No chip, no blade.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Genuine · OEM · Used

Kia Sportage 2012-2013 Flip Remote Key 3 Buttons

3 buttons · 315 MHz · FCC ID NYOSEKSAM11ATX · 95430-3W700 · no chip, no blade

3
Buttons
315 MHz
Frequency
AM11ATX
NYOSEKSAM11ATX
Used
Genuine factory unit

⭐ The Kia Sportage 2012-2013 flip remote key is a 3-button keyless entry remote built to part number 95430-3W700, running at 315 MHz under FCC ID NYOSEKSAM11ATX. This is a genuine factory unit in used condition, supplied with no transponder chip and no key blade. The same approval number also appears on Kia Soul flip remotes such as 95430-2K340, so the part number is the deciding reference rather than the FCC ID. It suits locksmiths and key shops rebuilding or replacing a Sportage remote on a turn-ignition car.

⚙️ Key features

315 MHz radio section

Transmits on 315 MHz, the frequency used on the North American Sportage of this generation. Check the marking on the original remote.

3-button pad layout

Lock, unlock and panic on the factory pad, matching the button layout of the original 95430-3W700 remote.

Genuine factory board

A factory-built remote carrying the original approval marking, pulled from service stock rather than reproduced.

Serviceable CR2032 cell

Runs on a common CR2032 lithium cell that is changed from the back of the housing in a few seconds.

💎 Benefits

Factory part at a lower cost

A used genuine remote keeps the original electronics in the job while leaving margin against a dealer-supplied part.

Flexible build-up

Supplied without a blade, so the housing is finished with the blade already matched to the customer vehicle.

Predictable radio behaviour

Factory boards register the way the vehicle expects, which removes the guesswork a mismatched replacement can bring.

Steady replacement demand

This Sportage generation is still on the road in volume, which keeps the reference moving off the shelf.

👥 Who it's for

Automotive locksmiths

Technicians registering Kia keyless entry remotes through a diagnostic tool.

Key shops and counter trade

Shops that build up a flip housing with their own blade stock at the counter.

Used car dealers and garages

Traders restoring remote function on a trade-in before it is handed over.

Fleet and rental workshops

Operators keeping older Sportage units in service with factory replacement remotes.

🚗 Compatible vehicles

KIA Sportage 2012-2013 🔧 SL body, North American 315 MHz build, turn-ignition trims without an immobiliser chip in the key
Before ordering, match FCC ID NYOSEKSAM11ATX and part number 95430-3W700 printed on the original remote. The Sportage of these years was also built with a separate remote on another approval number.

📦 What's included

✅ IN THE BOX

✔ 1 x genuine 3-button flip remote key, part number 95430-3W700

✔ Factory housing carrying the original FCC ID marking

✔ Used genuine unit, supplied without original packaging

❌ NOT INCLUDED

✘ Key blade - match a blade to the original key and cut it

✘ Transponder chip - no immobiliser chip is fitted to this remote

✘ CR2032 battery - fit a fresh cell before the registration

✘ Programming to the vehicle - runs through the OBD-II port with a diagnostic tool

📋 Specifications

📡 REMOTE
FCC ID
NYOSEKSAM11ATX
Part number
95430-3W700
Frequency
315 MHz
Buttons
3-button: lock, unlock, panic
🔑 PRODUCT TYPE
Key type
Flip remote key
Transponder chip
Not included
Key blade
Not included
Blade profile
Not published
Proximity
Not applicable
📦 PHYSICAL & POWER
Battery
CR2032
Condition
Used
Origin
Genuine · OEM
Weight
60 g
Color
Not specified
🔢 PART NUMBER REFERENCES
95430-3W700 this part
95430-3W701 Sportage sibling number
95430-2K340 Soul, same FCC ID
95430-2K250 Soul, same FCC ID

🛠️ Programming instructions

OBD PROGRAMMING - DIAGNOSTIC TOOL REQUIRED

This Sportage has no door and ignition self-programming sequence, so the remote cannot be taught to the car by hand. Registration runs through the OBD-II port.

Compatible tools: Autel IM508 and IM608, Xhorse VVDI Key Tool Plus, OBDSTAR key programmers and Launch X431 IMMO units all list Kia keyless entry remote registration over OBD.
Adding a remote: select the Sportage by model year, open the remote registration routine, then press the button the tool asks for on each remote in turn while the routine is running.
Program every remote together: the routine writes the full remote list in one pass, so have each remote the customer keeps on hand and register them all in the same session.
Before you start: fit a fresh CR2032, build the blade into the housing so the customer can still open the door, and keep a stable supply on the vehicle battery.
Check coverage first: the menu path and step order depend on the tool brand and the software version. Verify the exact model year is in the tool's supported list before starting the job.

Frequently Asked Questions

Common questions about this product

No. FCC ID NYOSEKSAM11ATX is also printed on Kia Soul flip remotes 95430-2K340, 95430-2K341 and 95430-2K250. The approval number covers the radio module only, so part number 95430-3W700 printed on the original remote is the deciding reference before you order.
No. This 95430-3W700 remote is supplied with no transponder chip fitted. It handles lock, unlock and panic only, and it will not start a vehicle that needs an immobiliser chip inside the key head, so check the car first.
No blade is supplied and the keyway is not published for this reference. Match a blade against the customer original key on the bench, fit it into the flip housing, then cut it to the door lock code before handover.
No. This Sportage has no door and ignition self-programming sequence, so the remote cannot be taught by hand. The 95430-3W700 remote is registered through the OBD-II port with a key programming tool instead, which means a locksmith visit for the customer.
It is listed for the Kia Sportage across 2012-2013 in North American 315 MHz specification. Match both the part number and the FCC ID on the original remote, because this generation was also built with a second remote reference.
It is a genuine factory unit in used condition, pulled from service rather than reproduced. The housing and button pad may carry light handling marks, and the remote ships without the original packaging, without dealer paperwork and without a battery.
It takes a CR2032 lithium cell, changed from the back of the housing. A battery is not supplied, so fit a fresh one before registration, because a weak cell is a common reason a remote is not seen by the tool.
The pad on this Kia Sportage remote gives lock, unlock and panic. That matches the factory layout for 95430-3W700, so a car whose original remote carried a different pad layout is running another part number entirely and needs a different remote.

Last updated: 6 November 2026