Skip to content

GMC Yukon 2014 Key Fob & Car Keys

Keys that fit the 2014 GMC Yukon: smart keys, remote keys and transponder keys, 5 or 6 buttons, FCC ID 0UC60221 or 0UC60270, NXP PCF7936AA chip, 315 MHz or 433 MHz. 10 compatible keys, remotes & shells (genuine and aftermarket) available for the 2014 GMC Yukon.

Last updated: 15 November 2026

Key specifications for the GMC Yukon 2014

Key types
smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz and 433 MHz
Buttons
5- and 6-button
Transponder chip
NXP PCF7936AA
Part numbers
22754043
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the GMC parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the GMC Yukon 2014 key

Key with a blade (regular or flip)

3 tools list this key. 3 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
    • All keys lost
    • Remote
  • Launch X-431 IMMO
    • All keys lost

Programming steps

Add key - on the car(US / Canada cars)

Needs: one working key, new key cut to the vehicle

  1. Cut the new key to the vehicle; have one key that already starts it.
  2. Put the working key in the ignition and turn it to ON/RUN (or start the engine), then turn it to LOCK/OFF and remove it.
  3. Within five seconds insert the new key and turn it to ON/RUN.
  4. The security light goes off when the key is learned (this can be too fast to notice).
  5. Start the engine with the new key; for each further key repeat from step 2.
Watch out: Adds only; never erases keys. Up to 10 keys (2007-2014 manuals) / 8 keys (2015).
All keys lost - on the car(US / Canada cars)

Needs: new key cut to the vehicle, 30 minutes

  1. Cut the new key. Have every key the customer keeps; the old keys stop working at the end.
  2. Insert the new key and turn to ON/RUN without cranking; the security light comes on.
  3. Wait about 10 minutes until the security light goes off, then turn to LOCK/OFF.
  4. Repeat ON/RUN, wait 10 minutes, LOCK/OFF two more times (about 30 minutes in all).
  5. After the third cycle turn to ON/RUN: this key is learned and every previously known key is erased.
  6. Learn the remaining keys with the add-key procedure.
Watch out: All previously learned keys are erased. U.S. only: GM's manuals say Canadian owners must use the dealer.

Without a tool

The remote is not programmed on the car by hand: it needs a tool or a dealer.

When the key changed

Smart key (push to start)

  • 2015 - 2020Chip: ID46Blade: HU100FCC: HYQ1AA, HYQ1EAHYQ1AA is 315 MHz, HYQ1EA is 433 MHz: read the FCC ID.
  • 2021 - 2024Chip: ID49433 MHzBlade: HU100FCC: YG0G21TB2Hitag Pro key, not compatible with the 2015-2020 ID46 key.

Key with a blade (regular or flip)

  • 1998 - 2006Chip: None (PassLock)(US / Canada cars)No chip in the key; PassLock sensor sits in the ignition lock.
  • 2007 - 2014This yearChip: ID46Blade: B111(US / Canada cars)Circle Plus key.
  • 2015 - 2020Chip: ID46 Hitag2 ExtendedBlade: HU100(US / Canada cars)Key-start trims; HU100 blade.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the GMC Yukon 2014?

10 listings fit the GMC Yukon 2014: smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 5- and 6-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the GMC Yukon 2014 remote use?

Listings for the GMC Yukon 2014 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the GMC Yukon 2014 key use?

The listings for this car carry: NXP PCF7936AA. Check the chip in each listing's specifications.

Which FCC IDs do GMC Yukon 2014 remotes carry?

The remotes listed for this car carry FCC ID 0UC60221 and 0UC60270. Match it with the FCC ID printed on your original remote.

Which tools program a GMC Yukon 2014 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518 and Launch X-431 IMMO for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the GMC Yukon 2014 remote be programmed without a tool?

The remote is not programmed on the car by hand: it needs a tool or a dealer.