Skip to content

Honda Civic 2008–2010 Key Fob & Car Keys

Keys that fit the 2008–2010 Honda Civic: flip keys, remote keys and transponder keys, 2 or 3 buttons, FCC ID 0UCG8D380HA, MLBHLIK1T or N5FS0084A, ID46 (HITAG 2) or NXP PCF7936AA chip, 433 MHz. 12 compatible keys, remotes & shells (genuine and aftermarket) available for the 2008 Honda Civic.

Last updated: 15 November 2026

Key specifications for the Honda Civic 2008–2010

Key types
flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
433 MHz
Buttons
2- and 3-button
Transponder chip
ID46 (HITAG 2) · NXP PCF7936AA · CN3 cloning chip
Blade profile
HON66
Battery
CR1616

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Honda parts catalogue, with the specifications on each listing. Every remote listed for the Honda Civic 2008–2010 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Honda Civic 2008 key

Key with a blade (regular or flip)

7 tools list this key. 5 of them list all keys lost.

All keys lost is listed by Lonsdor K518, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Autel IM508S and Autel IM608 II / IM608 Pro II. Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus list add key only.

Programming steps

Add key - Xhorse VVDI Key Tool Plus / Key Tool Max

Needs: working key, cut blank with ID46 (PCF7936) transponder or Honda remote head key

  1. Cut the new blade (HON66) and connect at the OBD port.
  2. Open Immo programming, Honda, select by type, pick the immobilizer system of the car, and choose Add one key.
  3. Insert the working key and switch on, then off, then on again as the tool counts down (repeat if nothing happens within about 10 seconds).
  4. Switch off, insert the new key and switch on within 15 seconds.
  5. Cycle the ignition off and on as prompted until the tool asks about the immobilizer light; it must go out.
  6. Switch off and on once more, then test start and remote on the new key.
Watch out: Watch the green immobilizer light, not only the screen: the light going out is the confirmation. Use a plain generated PCF7936 for ID46 work, not a super chip (Keysolved).
All keys lost - Autel MaxiIM IM608 / IM508S

Needs: new keys cut from the door lock (HON66), battery support, every key the customer wants

  1. Decode the driver's door lock and cut the blades; check the ignition turns (the barrel can have a cut the door lacks).
  2. Put battery support on and connect at the OBD port.
  3. Run the immobilizer status scan first; note the registered key count.
  4. Choose all keys lost (key reset / rewrite) and follow the timed ignition steps with the new key.
  5. Watch the immobilizer light go out to confirm, then add the next key the same way.
  6. Test start and remote on every key.
Watch out: All keys lost erases the whole key table: learn every key in the same session. Miss an ignition window and the routine has to be started again.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • All keys lost

Without a tool

The remote is not programmed on the car by hand: it needs a tool or a dealer.

When the key changed

Smart key (push to start)

  • 2016 - 2021Chip: ID47FCC: KR5V2X
  • from 2022Chip: 4A

Key with a blade (regular or flip)

  • 2001 - 2005Chip: ID48(GCC / Europe cars)Europe and Asia build; GCC cars vary by source country
  • 2001 - 2005Chip: ID13(US / Canada cars)
  • 2006 - 2013This yearChip: ID46
  • 2014 - 2021Chip: ID47FCC: MLBHLIK6-1T(US / Canada cars)Remote head key of non push-start trims

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Honda Civic 2008–2010?

12 listings fit the Honda Civic 2008–2010: flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Honda Civic 2008–2010 remote use?

Every remote listed for the Honda Civic 2008–2010 transmits on 433 MHz.

Which transponder chip does the Honda Civic 2008–2010 key use?

The listings for this car carry: ID46 (HITAG 2) · NXP PCF7936AA · CN3 cloning chip. Check the chip in each listing's specifications.

Which FCC IDs do Honda Civic 2008–2010 remotes carry?

The remotes listed for this car carry FCC ID 0UCG8D380HA, MLBHLIK1T and N5FS0084A. Match it with the FCC ID printed on your original remote.

Which blade profile does the Honda Civic 2008–2010 key use?

The blades listed for this car: HON66.

Which tools program a Honda Civic 2008–2010 key?

The tool makers' coverage lists name Lonsdor K518, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Autel IM508S, Autel IM608 II / IM608 Pro II and Xhorse VVDI Key Tool Max for this car; 5 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Honda Civic 2008–2010 remote be programmed without a tool?

The remote is not programmed on the car by hand: it needs a tool or a dealer.