Skip to content

Honda CR-V 2011 Key Fob & Car Keys

Keys that fit the 2011 Honda CR-V: flip keys, remote keys and transponder keys, 2 or 3 buttons, FCC ID MLBHLIK1T, 0UCG8D380HA or HLIK1T, ID46 (HITAG 2) or NXP PCF7936AA chip, 313 MHz or 433 MHz. 13 compatible keys, remotes & shells (genuine and aftermarket) available for the 2011 Honda CR-V.

Last updated: 15 November 2026

Key specifications for the Honda CR-V 2011

Key types
flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
313 MHz and 433 MHz
Buttons
2- and 3-button
Transponder chip
ID46 (HITAG 2) · NXP PCF7936AA · CN3 cloning chip
Blade profile
HON66
Part numbers
35119-TL0-305 · Replaces Honda 35118-T0A-A00
Battery
CR1616

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Honda parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 313 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Honda CR-V 2011 key

Key with a blade (regular or flip)

6 tools list this key. 4 of them list all keys lost.

Programming steps

Add key - Autel MaxiIM IM508 / IM608 / KM100

Needs: working key, new key cut (HON66) with an ID46 (PCF7936) chip, or a Honda remote head key

  1. Cut the new blade (HON66) and connect the tool at the OBD port.
  2. IMMO > Honda > Manual selection > CR-V > Blade key; pick the immobilizer system the tool offers and choose Add key (guided). A car without a 16-pin port needs the Honda 3-pin or 5-pin adapter.
  3. Insert the working key and switch on, off within 15 s, then on again within about 17 s.
  4. When the tool asks for the next key, switch off within 15 s, insert the new key and switch on within 20 s.
  5. Finish with the off / on cycles the tool counts down, each within 15 s, until the green immobilizer light goes out.
  6. Test start and remote lock / unlock on the new key and on the old keys.
Watch out: Watch the green immobilizer light, not only the screen: the light going out is the confirmation. Miss a 15 s window and the routine has to be started again.
All keys lost - Autel MaxiIM IM508 / IM608

Needs: new keys cut from the door lock (HON66), battery support unit, every key the customer wants

  1. Decode the driver's door lock and cut the blades; check the ignition turns.
  2. Put the battery support unit on and connect at the OBD port.
  3. Run the immobilizer status scan first; note the registered key count.
  4. Choose all keys lost (key reset / rewrite) and follow the timed ignition steps with the new key.
  5. Watch the immobilizer light go out to confirm, then add the next key the same way.
  6. Test start and remote on every key.
Watch out: All keys lost erases the whole key table: learn every key in the same session. Miss an ignition window and the routine has to be started again.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • All keys lost

Without a tool

The remote is not programmed on the car by hand: it needs a tool or a dealer.

When the key changed

Smart key (push to start)

  • 2015 - 2016Chip: ID47FCC: ACJ932HK1210A(US / Canada cars)Touring trim push-start key
  • 2017 - 2022Chip: ID47433 MHzFCC: KR5V2XSame key family as Civic and Pilot 2016 on
  • from 2023Chip: 4A433 MHzFCC: KR5TP-4Hitag AES key, not cloneable

Key with a blade (regular or flip)

  • 2002 - 2006Chip: ID48433 MHzBlade: HON66(GCC / Europe cars)Japan / UK built cars; read the chip on mixed imports
  • 2002 - 2006Chip: ID13Blade: HON66(US / Canada cars)US cars; Megamos 13 chip, F mark on blade
  • 2007 - 2014This yearChip: ID46Blade: HON66FCC: MLBHLIK-1T2014 is a split year: ID46 or ID47, read the key
  • 2015 - 2022Chip: ID47Blade: HON66FCC: MLBHLIK6-1T, MLBHLIK6-1TA(US / Canada cars)Remote head key; 433 MHz MLBHLIK6-1TA from 2017

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Honda CR-V 2011?

13 listings fit the Honda CR-V 2011: flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Honda CR-V 2011 remote use?

Listings for the Honda CR-V 2011 come in 313 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Honda CR-V 2011 key use?

The listings for this car carry: ID46 (HITAG 2) · NXP PCF7936AA · CN3 cloning chip. Check the chip in each listing's specifications.

Which FCC IDs do Honda CR-V 2011 remotes carry?

The remotes listed for this car carry FCC ID 0UCG8D380HA, HLIK1T, MLBHLIK1T and N5FS0084A. Match it with the FCC ID printed on your original remote.

Which blade profile does the Honda CR-V 2011 key use?

The blades listed for this car: HON66.

Which tools program a Honda CR-V 2011 key?

The tool makers' coverage lists name Lonsdor K518, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Autel IM608 II / IM608 Pro II, Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Honda CR-V 2011 remote be programmed without a tool?

The remote is not programmed on the car by hand: it needs a tool or a dealer.