SKU: B02073
Honda Odyssey 2010 Key Fob & Car Keys
Keys that fit the 2007–2010 Honda Odyssey: smart keys, flip keys and remote keys, 3 or 5 buttons, FCC ID 0UCG8D380HA, 0UCG8D399HA or MLBHLIK1T, NXP PCF7936AA or CN3 cloning chip chip, 313 MHz. 7 compatible keys, remotes & shells (genuine and aftermarket) available for the 2010 Honda Odyssey.
Last updated: 15 November 2026
Key specifications for the Honda Odyssey 2007–2010
- Key types
- smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 313 MHz
- Buttons
- 3- and 5-button
- Transponder chip
- NXP PCF7936AA · CN3 cloning chip · ID46 (HITAG 2)
- Blade profile
- HON66
- Part numbers
- 72147-SHJ-A21
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Honda parts catalogue, with the specifications on each listing. Every remote listed for the Honda Odyssey 2007–2010 transmits on 313 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- Honda 2003-2021 Transponder Key Shell - Buttonless · HON66 Blade Included - Aftermarket · New$1.12In Stock
- Honda Odyssey 2005-2010 Keyless Entry Remote 5-button 313.8MHz - OUCG8D-399H-A 72147-SHJ-A21
SKU: B06849
$14.04In Stock - $1.69Out of Stock
Programming the Honda Odyssey 2010 key
Key with a blade (regular or flip)
6 tools list this key. 3 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
- Add key
- All keys lost
- Add key(US / Canada cars)
- Add key(US / Canada cars)
- Lonsdor KH100
- Remote
All keys lost is listed by OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Lonsdor K518. Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus list add key only.
Programming steps
Add key - Xhorse VVDI Key Tool Plus / Key Tool Max(US / Canada cars)
Needs: working key, cut blank with ID46 (PCF7936) transponder or Honda remote head key
- Cut the new blade (HON66) and connect at the OBD port.
- Open Immo programming, Honda, select by type, pick the immobilizer system of the car, and choose Add one key.
- Insert the working key and switch on, then off, then on again as the tool counts down (repeat if nothing happens within about 10 seconds).
- Switch off, insert the new key and switch on within 15 seconds.
- Cycle the ignition off and on as prompted until the tool asks about the immobilizer light; it must go out.
- Switch off and on once more, then test start and remote on the new key.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- All keys lost
Without a tool
The remote is programmed on the car, without a tool. Up to 3 remotes.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: working ignition key, every remote to be used (up to 3)
- Unlock all doors and sit in the car with all remotes at hand.
- Turn the ignition to ON (II), press LOCK on one remote within a few seconds, turn the ignition back to LOCK (0).
- Do this three times in total, each step within 5 seconds of the last.
- Turn to ON (II) a fourth time and press LOCK on the same remote: the locks cycle to show programming mode.
- Within a few seconds press LOCK on each remote to be used; the locks cycle after each one.
- Turn the ignition to LOCK (0) to finish and test every remote.
When the key changed
Smart key (push to start)
- 2014 - 2017Chip: ID47315 MHzFCC: KR5V1X(US / Canada cars)Push-start trims, 313.8 MHz
- 2018 - 2024Chip: ID47433 MHzFCC: KR5V2X, KR5T4X(US / Canada cars)US vans moved to 433 MHz; KR5T4X from 2021
Key with a blade (regular or flip)
- 1998 - 2004Chip: ID13(US / Canada cars)Fixed Megamos 13 chip; HD106 type blade on early vans
- 2005 - 2013This yearChip: ID46315 MHzBlade: HON66FCC: N5F-A04TAA(US / Canada cars)Remote head key, 313.8 MHz; N5F-A04TAA on 2011-2013
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Honda Odyssey 2007–2010?
7 listings fit the Honda Odyssey 2007–2010: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 3- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Honda Odyssey 2007–2010 remote use?
Every remote listed for the Honda Odyssey 2007–2010 transmits on 313 MHz.
Which transponder chip does the Honda Odyssey 2007–2010 key use?
The listings for this car carry: NXP PCF7936AA · CN3 cloning chip · ID46 (HITAG 2). Check the chip in each listing's specifications.
Which FCC IDs do Honda Odyssey 2007–2010 remotes carry?
The remotes listed for this car carry FCC ID 0UCG8D380HA, 0UCG8D399HA, MLBHLIK1T and N5FS0084A. Match it with the FCC ID printed on your original remote.
Which blade profile does the Honda Odyssey 2007–2010 key use?
The blades listed for this car: HON66.
Which tools program a Honda Odyssey 2007–2010 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Lonsdor K518, Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus and Lonsdor KH100 for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Honda Odyssey 2007–2010 remote be programmed without a tool?
The remote is programmed on the car, without a tool. Up to 3 remotes.






