Skip to content

Honda Odyssey 2013 Key Fob & Car Keys

Keys that fit the 2013 Honda Odyssey: smart keys and remote keys, 4, 5 or 6 buttons, FCC ID N5FA04TAA, A04TAB or T6CJ02, NXP PCF7936AA or ID46 (HITAG 2) chip, 313 MHz or 433 MHz. 12 compatible keys, remotes & shells (genuine and aftermarket) available for the 2013 Honda Odyssey.

Last updated: 15 November 2026

Key specifications for the Honda Odyssey 2013

Key types
smart keys, remote keys, key shells, emergency blades and key blanks
Frequency
313 MHz and 433 MHz
Buttons
4-, 5- and 6-button
Transponder chip
NXP PCF7936AA · ID46 (HITAG 2) · CN3 cloning chip
Blade profile
HON66
Part numbers
For 35118-TK8-A40 · For 72147-TK8-Y410-M1
Battery
CR1616 · CR2025
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Honda parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 313 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Honda Odyssey 2013 key

Key with a blade (regular or flip)

6 tools list this key. 3 of them list all keys lost.

All keys lost is listed by Lonsdor K518, OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus list add key only.

Programming steps

Add key - Xhorse VVDI Key Tool Plus / Key Tool Max(US / Canada cars)

Needs: working key, cut blank with ID46 (PCF7936) transponder or Honda remote head key

  1. Cut the new blade (HON66) and connect at the OBD port.
  2. Open Immo programming, Honda, select by type, pick the immobilizer system of the car, and choose Add one key.
  3. Insert the working key and switch on, then off, then on again as the tool counts down (repeat if nothing happens within about 10 seconds).
  4. Switch off, insert the new key and switch on within 15 seconds.
  5. Cycle the ignition off and on as prompted until the tool asks about the immobilizer light; it must go out.
  6. Switch off and on once more, then test start and remote on the new key.
Watch out: Watch the green immobilizer light, not only the screen: the light going out is the confirmation. Use a plain generated PCF7936 for ID46 work, not a super chip (Keysolved).

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • All keys lost

Without a tool

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: working ignition key, every remote to be used (up to 3)

  1. Unlock all doors and sit in the car with all remotes at hand.
  2. Turn the ignition to ON (II), press LOCK on one remote within a few seconds, turn the ignition back to LOCK (0).
  3. Do this three times in total, each step within 5 seconds of the last.
  4. Turn to ON (II) a fourth time and press LOCK on the same remote: the locks cycle to show programming mode.
  5. Within a few seconds press LOCK on each remote to be used; the locks cycle after each one.
  6. Turn the ignition to LOCK (0) to finish and test every remote.
Watch out: Entering programming mode erases every remote: program all of them in the same session. Maximum 3 remotes.

When the key changed

Smart key (push to start)

  • 2014 - 2017Chip: ID47315 MHzFCC: KR5V1X(US / Canada cars)Push-start trims, 313.8 MHz
  • 2018 - 2024Chip: ID47433 MHzFCC: KR5V2X, KR5T4X(US / Canada cars)US vans moved to 433 MHz; KR5T4X from 2021

Key with a blade (regular or flip)

  • 1998 - 2004Chip: ID13(US / Canada cars)Fixed Megamos 13 chip; HD106 type blade on early vans
  • 2005 - 2013This yearChip: ID46315 MHzBlade: HON66FCC: N5F-A04TAA(US / Canada cars)Remote head key, 313.8 MHz; N5F-A04TAA on 2011-2013

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Honda Odyssey 2013?

12 listings fit the Honda Odyssey 2013: smart keys, remote keys, key shells, emergency blades and key blanks, in 4-, 5- and 6-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Honda Odyssey 2013 remote use?

Listings for the Honda Odyssey 2013 come in 313 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Honda Odyssey 2013 key use?

The listings for this car carry: NXP PCF7936AA · ID46 (HITAG 2) · CN3 cloning chip. Check the chip in each listing's specifications.

Which FCC IDs do Honda Odyssey 2013 remotes carry?

The remotes listed for this car carry FCC ID A04TAB, N5FA04TAA and T6CJ02. Match it with the FCC ID printed on your original remote.

Which blade profile does the Honda Odyssey 2013 key use?

The blades listed for this car: HON66.

Which tools program a Honda Odyssey 2013 key?

The tool makers' coverage lists name Lonsdor K518, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus and Lonsdor KH100 for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.