Skip to content

Hyundai Santa FE 2008 Key Fob & Car Keys

Keys that fit the 2008 Hyundai Santa FE: smart keys, remote keys and transponder keys, 2 or 3 buttons, FCC ID SVISMKFKR00, NXP PCF7936AA or CN3 cloning chip chip, 433 MHz or 447 MHz. 8 compatible keys, remotes & shells (genuine and aftermarket) available for the 2008 Hyundai Santa FE.

Last updated: 15 November 2026

Key specifications for the Hyundai Santa FE 2008

Key types
smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
433 MHz and 447 MHz
Buttons
2- and 3-button
Transponder chip
NXP PCF7936AA · CN3 cloning chip · ID46 (HITAG 2)
Blade profile
HYN14R
Part numbers
95411-2B510 · 95440-2B800
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 433 MHz and 447 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Hyundai Santa FE 2008 key

Key with a blade (regular or flip)

5 tools list this key. 3 of them list all keys lost.

Programming steps

Add key - Lonsdor K518

Needs: every key the customer keeps (all are taught again), new transponder key or flip remote with the right chip, cut to the lock, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)

  1. Check the cluster shows an immobilizer lamp at ignition ON (US turn-key cars without one: use the US no-immobilizer case).
  2. Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
  3. Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
  4. Start Key learning, switch the ignition ON with the first key and enter the PIN.
  5. Teach the first key; when asked, switch off, insert the next key and switch ON within about 10 seconds. Repeat for every key, the working ones included.
  6. Leave the ignition off for about 10 seconds, then start with each key.
  7. Learn the remotes with Transmitter code saving.
Watch out: Key teaching rebuilds the key list: a key not presented in the same session stops starting the car. Bring every key the customer keeps. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. The transponder and the remote buttons are learned separately on blade / flip keys: a key that starts the car may still not lock or unlock until Transmitter code saving is done. Up to 8 transponder keys and 4 remotes.
All keys lost - Lonsdor K518

Needs: two new transponder keys or flip remotes cut to the lock (by key code or decoding), 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)

  1. Cut a new key to the door / ignition lock so the ignition can be switched ON.
  2. Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
  3. Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
  4. Start Key learning, switch the ignition ON with the first key and enter the PIN.
  5. Teach each new key in turn (switch off, next key, ON within about 10 seconds).
  6. Leave the ignition off for about 10 seconds, then start with each key.
  7. Learn the remotes with Transmitter code saving.
Watch out: Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. Lost keys stop starting the car once the new set is taught. The transponder and the remote buttons are learned separately on blade / flip keys: a key that starts the car may still not lock or unlock until Transmitter code saving is done.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • Remote
    PIN read function

When the key changed

Smart key (push to start)

  • 2010 - 2012Chip: ID46433 MHz(GCC / Europe cars)Push-to-start trims only
  • 2013 - 2018Chip: ID46FCC: SY5DMFNA04, SY5DMFNA433US fobs 315 MHz, GCC fobs 433 MHz
  • 2019 - 2023Chip: ID47433 MHzFCC: TQ8-FOB-4F19
  • from 2024Chip: 4A433 MHzFCC: TQ8-FOB-4F61M43

Key with a blade (regular or flip)

  • 2000 - 2002Chip: 4D-60(GCC / Europe cars)
  • 2003 - 2012This yearChip: ID46(GCC / Europe cars)
  • 2013 - 2018Chip: DST80433 MHz(GCC / Europe cars)Flip key chip sold as 4D60 80-bit; US flips have no chip
  • 2019 - 2023Chip: ID47433 MHzFCC: TQ8-RKE-4F39US flips 95430-S2100 / S2300 have no chip

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Hyundai Santa FE 2008?

8 listings fit the Hyundai Santa FE 2008: smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Hyundai Santa FE 2008 remote use?

Listings for the Hyundai Santa FE 2008 come in 433 MHz and 447 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Hyundai Santa FE 2008 key use?

The listings for this car carry: NXP PCF7936AA · CN3 cloning chip · ID46 (HITAG 2). Check the chip in each listing's specifications.

Which FCC IDs do Hyundai Santa FE 2008 remotes carry?

The remotes listed for this car carry FCC ID SVISMKFKR00. Match it with the FCC ID printed on your original remote.

Which blade profile does the Hyundai Santa FE 2008 key use?

The blades listed for this car: HYN14R.

Which tools program a Hyundai Santa FE 2008 key?

The tool makers' coverage lists name Lonsdor K518, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus and Launch X-431 IMMO for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.