Hyundai Sonata 2013 Key Fob & Car Keys
Keys that fit the 2013 Hyundai Sonata: smart keys, flip keys and remote keys, 3 or 4 buttons, FCC ID SY5HMFNA04, 0KAN029 or SVIHMFCH34, NXP PCF7936AA or ID46 (HITAG 2) chip, 315 MHz or 433 MHz. 20 compatible keys, remotes & shells (genuine and aftermarket) available for the 2013 Hyundai Sonata.
Last updated: 16 November 2026
Key specifications for the Hyundai Sonata 2013
- Key types
- smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 315 MHz and 433 MHz
- Buttons
- 3- and 4-button
- Transponder chip
- NXP PCF7936AA · ID46 (HITAG 2)
- Blade profile
- TOY48 · LXP90 · KK10
- Part numbers
- 81996-2L000 · 81996-2J700 · 81996-3S020 · 95430-3S000
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $14.04In Stock
- Hyundai Kia Sonata Genesis Optima Sportage 2008-2017 Smart Key Shell 4-Button - TOY48 Blade
SKU: B02233
$4.21In Stock - $2.82In Stock
- $3.05In Stock
- $37.92Out of Stock
Programming the Hyundai Sonata 2013 key
Smart key (push to start)
8 tools list this key. 3 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key
- All keys lost
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
PIN read function - Advanced Diagnostics Smart Pro
- Add key
- Launch X-431 IMMO
- Add key
- Add key
- OBDSTAR X300 DP Plus
- Add key
- Universal key
All keys lost is listed by OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II and XTOOL X100 PAD3 / X100 MAX. Advanced Diagnostics Smart Pro, Launch X-431 IMMO, Lonsdor K518 and OBDSTAR X300 DP Plus list add key only.
Programming steps
Add key - Autel MaxiIM IM608
Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool read (by OBD on 8A cars; with a working fob on 46 / 47 / 4A cars where Autel lists it) or by VIN from the dealer
- Connect the IM608 by OBD, identify the car by VIN and open the Smart key (SMK) system; check SMK status and the current fob first.
- Read the PIN with the tool's function for the key type, or get it by VIN from the dealer.
- Start Smart key learning and accept the warning that all fobs will be erased.
- Ignition OFF (cluster dark), open and close the driver's door, then enter the PIN.
- Press OK, then within 5 seconds press and hold the start button with the back / top of the first fob for about 5 seconds until the immobilizer lamp flashes (cars with a fob slot: put the fob in the slot).
- Repeat for every fob, the old ones included; cancel when the last one is done.
- Check that each fob locks, unlocks and starts the car; read the key count.
Add key - OBDSTAR X300 DP (or Lonsdor K518, same route)
Needs: a working 46-chip smart key, MINI900 / ND900 (CN900 mini) decoder, every fob the customer keeps, new 46-chip smart key
- Take the battery out of the working fob.
- Collect the 12-digit key code with the MINI900 / ND900 held with the fob at the start button (fob-slot cars: remove the slot holder first; repeat if it fails).
- On the tool select the car, Read PinCode, then the 46 smart card PIN function, and enter the 12 digits as the tool asks.
- Note the 6-digit PIN the tool returns.
- Run Smart key programming: ignition OFF, enter the PIN, then press the start button with each fob within 5 seconds (or put it in the slot) until each is accepted.
- Learn every fob to keep, then test lock, unlock and start.
All keys lost - Autel MaxiIM IM608
Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer (no Autel all-keys-lost PIN read found for this car's chip), emergency blade cut to the door lock
- Open the car with the emergency blade cut to the door lock.
- Connect the IM608 by OBD and identify the car (enter the VIN by hand if auto VIN fails with no fob present).
- Get the PIN by VIN from the dealer.
- Start Smart key learning and accept the erase warning.
- Ignition OFF, open and close the driver's door, enter the PIN.
- Press OK, then within 5 seconds hold the back / top of the first new fob on the start button for about 5 seconds until the immobilizer lamp flashes.
- Repeat for the second fob, then test lock, unlock and start with each.
Key with a blade (regular or flip)
6 tools list this key. 3 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
PIN read function - Add key
- All keys lost
- Add key
- Remote
PIN read function- Universal key
- Universal key
All keys lost is listed by OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Autel IM608 II / IM608 Pro II. Lonsdor K518 lists add key only.
Programming steps
Add key - Autel MaxiIM IM608
Needs: every key the customer keeps (all are taught again), new transponder key or flip remote cut to the lock, 6-digit PIN: read by OBD on 46-chip SMARTRA cars, read from a working key on 80-bit (4D / DST80) cars where Autel lists it (XP400 + APB131), otherwise by VIN from the dealer, battery support (stable 12 V)
- Check the cluster shows an immobilizer lamp at ignition ON (US turn-key cars without one: use the US no-immobilizer case).
- Connect the IM608 by OBD, identify the car by VIN and open the Immobilizer system.
- Read the PIN with the tool's PIN function for the chip type; if the car is not listed, get the PIN by VIN from the dealer.
- Start Key learning, switch the ignition ON with the first key and enter the PIN.
- Teach the first key; when asked, switch off, insert the next key and switch ON within about 10 seconds. Repeat for every key, the working ones included.
- Finish, leave the ignition off for about 10 seconds, then start the engine with each key.
- Learn the remote buttons with Transmitter code saving (ignition off, key out, press LOCK on each remote when prompted).
Add key - Autel MaxiIM IM608 (Transmitter code saving)(US / Canada cars)
Needs: working key to copy, remote (flip key or separate fob) for the car, every remote the customer keeps
- Confirm the car has no immobilizer: turn-key ignition, no start button and no immobilizer lamp in the cluster (the dealer can confirm by VIN).
- Duplicate the working key; with no immobilizer it starts the engine without programming.
- Connect the tool by OBD and open Transmitter code saving (remote keyless entry).
- Ignition OFF and key out when asked, then press LOCK on the first remote about 2 seconds after confirming.
- Repeat for each remote to keep (up to 4), then test lock and unlock.
- If the car has the dealer anti-theft logic upgrade, check it starts after locking and unlocking with the new remote.
All keys lost - Autel MaxiIM IM608
Needs: two new transponder keys or flip remotes cut to the lock (by key code or decoding), 6-digit PIN: read by OBD on 46-chip SMARTRA cars; by VIN from the dealer on 80-bit (4D / DST80) cars, whose PIN read needs a working key, battery support (stable 12 V)
- Cut a new key to the door / ignition lock so the ignition can be switched ON.
- Connect the IM608 by OBD, identify the car by VIN and open the Immobilizer system.
- Get the PIN: tool PIN read by OBD on 46-chip SMARTRA cars, otherwise by VIN from the dealer.
- Start Key learning, switch ON with the first new key and enter the PIN.
- Teach each new key in turn (switch off, next key, ON within about 10 seconds).
- Leave the ignition off for about 10 seconds, then start with each key.
- Learn the remotes with Transmitter code saving.
All keys lost - Autel MaxiIM IM608 (Transmitter code saving)(US / Canada cars)
Needs: key code or lock decoding, remote (flip key or separate fob) for the car, every remote the customer keeps
- Confirm the car has no immobilizer: turn-key ignition, no start button and no immobilizer lamp in the cluster (the dealer can confirm by VIN).
- Cut the new key by key code or by decoding the lock; with no immobilizer it starts the engine without programming.
- Connect the tool by OBD and open Transmitter code saving (remote keyless entry).
- Ignition OFF and key out when asked, then press LOCK on the first remote about 2 seconds after confirming.
- Repeat for each remote to keep (up to 4), then test lock and unlock.
- If the car has the dealer anti-theft logic upgrade, check it starts after locking and unlocking with the new remote.
When the key changed
Smart key (push to start)
- 2011 - 2014This yearChip: ID46FCC: SY5HMFNA04US fobs are 315 MHz
- 2015 - 2019Chip: 8A433 MHzFCC: CQOFD00120
- 2020 - 2023Chip: ID47433 MHzFCC: TQ8-FOB-4F27, TQ8-FOB-4F28
- from 2024Chip: 4A433 MHzFCC: TQ8-FOB-4F61M43, TQ8-FOB-4F89U44Some 2023 facelift cars already use 4A
Key with a blade (regular or flip)
- 1996 - 1998Chip: 4C(GCC / Europe cars)
- 1999 - 2004Chip: 4D-60(GCC / Europe cars)1998 cars can have either 4C or 4D-60
- 2005 - 2010Chip: ID46(GCC / Europe cars)
- 2011 - 2014This yearChip: ID46
- 2015 - 2019Chip: DST80433 MHzFCC: RKE-4F15, RKE-4F22(GCC / Europe cars)Flip key chip sold as 4D60 80-bit; US flips have no chip
- 2020 - 2023Chip: ID47433 MHzFCC: TQ8-RKE-4F40
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Hyundai Sonata 2013?
20 listings fit the Hyundai Sonata 2013: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Hyundai Sonata 2013 remote use?
Listings for the Hyundai Sonata 2013 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.
Which transponder chip does the Hyundai Sonata 2013 key use?
The listings for this car carry: NXP PCF7936AA · ID46 (HITAG 2). Check the chip in each listing's specifications.
Which FCC IDs do Hyundai Sonata 2013 remotes carry?
The remotes listed for this car carry FCC ID 0KAN029, SVIHMFCH34, SVIHMFEU04, SVIHMFKR04, SVIMDFEU03, SY5HMFNA04 and SY5RBFNA433. Match it with the FCC ID printed on your original remote.
Which blade profile does the Hyundai Sonata 2013 key use?
The blades listed for this car: TOY48 · LXP90 · KK10.
Which tools program a Hyundai Sonata 2013 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, XTOOL X100 PAD3 / X100 MAX, Advanced Diagnostics Smart Pro, Launch X-431 IMMO and Lonsdor K518 for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.



















