Skip to content

Kia Picanto 2011 Key Fob & Car Keys

Keys that fit the 2011 Kia Picanto: smart keys, flip keys and remote keys, 2 or 3 buttons, FCC ID SEKSKM10TX, 4D-60 (80-bit) or ID46 (HITAG 2) chip, 433 MHz. 11 compatible keys, remotes & shells (genuine and aftermarket) available for the 2011 Kia Picanto.

Last updated: 12 November 2026

Key specifications for the Kia Picanto 2011

Key types
smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
433 MHz
Buttons
2- and 3-button
Transponder chip
4D-60 (80-bit) · ID46 (HITAG 2)
Blade profile
HYN17 · HYN6
Part numbers
81926-2L000 · 81996-2V101 · 95430-1Y300 · 81996-1Y620 · 95440-1Y500
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Kia parts catalogue, with the specifications on each listing. Every remote listed for the Kia Picanto 2011 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Kia Picanto 2011 key

Smart key (push to start)

One tool lists this key.

Key with a blade (regular or flip)

4 tools list this key. 3 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
    • Add key(non-US cars)
    • All keys lost(non-US cars)
    • Add key
    • Remote

All keys lost is listed by OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Autel IM608 II / IM608 Pro II. Lonsdor K518 lists add key only.

Programming steps

Add key - Autel MaxiIM IM608(GCC / Europe cars)

Needs: every key the customer keeps (all are taught again), new transponder key or flip remote cut to the lock, 6-digit PIN: read by OBD on 46-chip SMARTRA cars, read from a working key on 80-bit (4D / DST80) cars where Autel lists it (XP400 + APB131), otherwise by VIN from the dealer, battery support (stable 12 V)

  1. Check the cluster shows an immobilizer lamp at ignition ON (US turn-key cars without one: use the US no-immobilizer case).
  2. Connect the IM608 by OBD, identify the car by VIN and open the Immobilizer system.
  3. Read the PIN with the tool's PIN function for the chip type; if the car is not listed, get the PIN by VIN from the dealer.
  4. Start Key learning, switch the ignition ON with the first key and enter the PIN.
  5. Teach the first key; when asked, switch off, insert the next key and switch ON within about 10 seconds. Repeat for every key, the working ones included.
  6. Finish, leave the ignition off for about 10 seconds, then start the engine with each key.
  7. Learn the remote buttons with Transmitter code saving (ignition off, key out, press LOCK on each remote when prompted).
Watch out: Key teaching rebuilds the key list: a key not presented in the same session stops starting the car. Bring every key the customer keeps. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. The transponder and the remote buttons are learned separately on blade / flip keys: a key that starts the car may still not lock or unlock until Transmitter code saving is done. Up to 8 transponder keys and 4 remotes.
All keys lost - Autel MaxiIM IM608(GCC / Europe cars)

Needs: two new transponder keys or flip remotes cut to the lock (by key code or decoding), 6-digit PIN: read by OBD on 46-chip SMARTRA cars; by VIN from the dealer on 80-bit (4D / DST80) cars, whose PIN read needs a working key, battery support (stable 12 V)

  1. Cut a new key to the door / ignition lock so the ignition can be switched ON.
  2. Connect the IM608 by OBD, identify the car by VIN and open the Immobilizer system.
  3. Get the PIN: tool PIN read by OBD on 46-chip SMARTRA cars, otherwise by VIN from the dealer.
  4. Start Key learning, switch ON with the first new key and enter the PIN.
  5. Teach each new key in turn (switch off, next key, ON within about 10 seconds).
  6. Leave the ignition off for about 10 seconds, then start with each key.
  7. Learn the remotes with Transmitter code saving.
Watch out: Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. Lost keys stop starting the car once the new set is taught. The transponder and the remote buttons are learned separately on blade / flip keys: a key that starts the car may still not lock or unlock until Transmitter code saving is done.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • Remote
    PIN read function

When the key changed

Smart key (push to start)

  • 2011 - 2017This yearChip: ID46433 MHz(GCC / Europe cars)
  • 2017 - 2022Chip: 8A(GCC / Europe cars)

Key with a blade (regular or flip)

  • 2004 - 2011This yearChip: ID46(GCC / Europe cars)
  • 2011 - 2017This yearChip: DST80(GCC / Europe cars)Flip key chip sold as 4D60 80-bit
  • 2017 - 2023Chip: DST80433 MHz(GCC / Europe cars)Flip key chip sold as 4D60 80-bit

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Kia Picanto 2011?

11 listings fit the Kia Picanto 2011: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Kia Picanto 2011 remote use?

Every remote listed for the Kia Picanto 2011 transmits on 433 MHz.

Which transponder chip does the Kia Picanto 2011 key use?

The listings for this car carry: 4D-60 (80-bit) · ID46 (HITAG 2). Check the chip in each listing's specifications.

Which FCC IDs do Kia Picanto 2011 remotes carry?

The remotes listed for this car carry FCC ID SEKSKM10TX. Match it with the FCC ID printed on your original remote.

Which blade profile does the Kia Picanto 2011 key use?

The blades listed for this car: HYN17 · HYN6.

Which tools program a Kia Picanto 2011 key?

The tool makers' coverage lists name Autel KM100 (IKEY universal smart key), OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Autel IM608 II / IM608 Pro II, Lonsdor K518 and Launch X-431 IMMO for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.