Skip to content

Mazda 3 2015 Key Fob & Car Keys

Keys that fit the 2015 Mazda 3: smart keys, flip keys and remote keys, 2, 3 or 4 buttons, FCC ID SKE13E01, WAZSKE13D01 or BGBX1T478SKE12501, ID49 (HITAG Pro) or 4D-63 (80-bit) chip, 315 MHz or 433 MHz. 20 compatible keys, remotes & shells (genuine and aftermarket) available for the 2015 Mazda 3.

Last updated: 14 November 2026

Key specifications for the Mazda 3 2015

Key types
smart keys, flip keys, remote keys, key shells, emergency blades and key blanks
Frequency
315 MHz and 433 MHz
Buttons
2-, 3- and 4-button
Transponder chip
ID49 (HITAG Pro) · 4D-63 (80-bit)
Blade profile
MZ27 · MAZ24 · MAZ24R
Part numbers
GJY9-67-5DY · KDY3-67-5DY · D6Y1-76-2GXB · SKE13D-01
Battery
CR2025 · CR2032 · CR1616

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mazda parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Mazda 3 2015 key

Key with a blade (regular or flip)

Programming steps

Add key - on the car(US / Canada cars)

Needs: two original factory keys that start the car, a new key already cut to the car

  1. Insert the first working key, turn it to ON without cranking, hold it there at least 1 second, then back to OFF and remove it.
  2. Within 10 seconds, insert the second working key, turn it to ON for between 1 and 10 seconds, then back to OFF and remove it.
  3. Within 20 seconds, insert the new key, turn it to ON for at least 1 second, then back to OFF.
  4. The security light stays on for 3 seconds when the new key has been learned.
Watch out: With only one working key, or none, this method does not work; the key must be programmed with a tool or by the dealer. A cloned key copied at a hardware store does not count as one of the two keys; both must be original programmed keys.

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: Cars without the Smart Entry System, every remote the customer keeps

  1. Sit in the car with all doors closed, then open the driver's door and leave it open.
  2. Inside 24 seconds: insert the key, cycle the ignition ON and OFF three times with the key left in place, then shut and reopen the driver's door three times.
  3. The doors lock and unlock by themselves: the car is in programming mode. If they do not, start again.
  4. Press UNLOCK twice on the first remote. The locks cycle to confirm it.
  5. One remote only: give it a double press of any button, let the locks cycle, then one more double press.
  6. Two remotes: give the second remote a double press of any button, let the locks cycle, then a second double press on that same remote.
  7. Three remotes: give the second remote a double press of any button, let the locks cycle, then a double press on the third remote.
  8. Programming ends there. Close the door and test every remote.
Watch out: The key and door sequence must fit within 24 seconds, or the car does not enter programming mode. The car always takes three remote entries: with one or two remotes, press the last remote again so the total reaches three.

When the key changed

Smart key (push to start)

  • 2010 - 2013Chip: 4D-63FCC: WAZX1T768SKE11A03(US / Canada cars)80-bit 4D-63 (DST80) smart key
  • 2014 - 2018This yearChip: ID49433 MHz(GCC / Europe cars)
  • 2014 - 2018This yearChip: ID49315 MHzFCC: WAZSKE13D01(US / Canada cars)
  • from 2019Chip: 6AFCC: WAZSKE11D01AES 6A chip, not the ID49 key of 2014-2018

Key with a blade (regular or flip)

  • 2004 - 2013Chip: 4D-63Blade: MAZ24RRead the key: 4D-63 in 40-bit or 80-bit version

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Mazda 3 2015?

20 listings fit the Mazda 3 2015: smart keys, flip keys, remote keys, key shells, emergency blades and key blanks, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Mazda 3 2015 remote use?

Listings for the Mazda 3 2015 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Mazda 3 2015 key use?

The listings for this car carry: ID49 (HITAG Pro) · 4D-63 (80-bit). Check the chip in each listing's specifications.

Which FCC IDs do Mazda 3 2015 remotes carry?

The remotes listed for this car carry FCC ID BGBX1T478SKE12501, SKE13E01, WAZSKE13D01 and WAZSKE13D02. Match it with the FCC ID printed on your original remote.

Which blade profile does the Mazda 3 2015 key use?

The blades listed for this car: MZ27 · MAZ24 · MAZ24R.

Can the Mazda 3 2015 remote be programmed without a tool?

The remote is programmed on the car, without a tool.