Skip to content

Mazda 6 2016 Key Fob & Car Keys

Keys that fit the 2016 Mazda 6: smart keys and remote keys, 3 or 4 buttons, FCC ID SKE13E01, WAZSKE13D01 or BGBX1T478SKE12501, ID49 (HITAG Pro) or 4D-63 (80-bit) chip, 315 MHz or 433 MHz. 21 compatible keys, remotes & shells (genuine and aftermarket) available for the 2016 Mazda 6.

Last updated: 14 November 2026

Key specifications for the Mazda 6 2016

Key types
smart keys, remote keys, key shells, emergency blades and key blanks
Frequency
315 MHz and 433 MHz
Buttons
3- and 4-button
Transponder chip
ID49 (HITAG Pro) · 4D-63 (80-bit)
Blade profile
MZ27 · MAZ24 · MAZ24R
Part numbers
GHY1-67-5DY · GJY9-67-5DY · D6Y1-76-2GXB · SKE13D-01 · GRV6-67-5RY
Battery
CR2032 · CR2025 · CR1616

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mazda parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Mazda 6 2016 key

Smart key (push to start)

One tool lists this key.

  • OBDSTAR Key Master G3
    • All keys lost

Programming steps

All keys lost - OBDSTAR Key Master G3 / X300 DP Plus

Needs: two or more new smart keys for the car (OEM, or universal keys generated as the Mazda type first), battery support unit, no PIN entry on these years (per the OBDSTAR list)

  1. Have at least two new smart keys ready: OEM keys for the car, or universal keys generated first as the Mazda smart key type, frequency matched to the car.
  2. With no key in the car, hold the Start button until its light changes, then press it again briefly: the dash comes on and the car answers on OBD.
  3. Connect the OBDSTAR by OBD. IMMO > Mazda > Mazda 6 > year > Smart key system > All keys lost.
  4. Keep every other smart key at least 1 m away. The tool reads the key count and erases all stored keys.
  5. Switch the ignition off when asked, then touch the first new key to the Start button: the key count goes to 1.
  6. Repeat for the second key (count 2) and any further key.
  7. Finish each key in the same order: ignition off, foot on the brake, press Start with that key held to the button so the engine runs about 3 s, then off.
  8. Test push-start, remote lock / unlock and door handle entry on every key.
Watch out: All stored keys are erased: program at least two keys in the same session. Learn the keys one at a time: two new keys near the Start button together can confuse the learning. Non-OEM keys can leave a keyless system warning on the dash; OEM keys avoid it. Later cars (2022 on, or cars updated at the dealer) can ask for a PIN: check the tool before you quote.

When the key changed

Smart key (push to start)

  • 2009 - 2013Chip: 4D-63315 MHzFCC: KR55WK49383(US / Canada cars)Chip is in the emergency key, not in the fob
  • 2014 - 2021This yearChip: ID49433 MHz(GCC / Europe cars)GHY1-67-5DY type keys
  • 2014 - 2021This yearChip: ID49315 MHzFCC: WAZSKE13D01, WAZSKE13D03(US / Canada cars)WAZSKE13D03 from 2019

Key with a blade (regular or flip)

  • 2003 - 2013Chip: 4D-63Blade: MAZ24RFlip remote key on later cars; read 40 or 80-bit

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Mazda 6 2016?

21 listings fit the Mazda 6 2016: smart keys, remote keys, key shells, emergency blades and key blanks, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Mazda 6 2016 remote use?

Listings for the Mazda 6 2016 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Mazda 6 2016 key use?

The listings for this car carry: ID49 (HITAG Pro) · 4D-63 (80-bit). Check the chip in each listing's specifications.

Which FCC IDs do Mazda 6 2016 remotes carry?

The remotes listed for this car carry FCC ID BGBX1T478SKE12501, SKE13E01, SKE13E02, WAZSKE13D01 and WAZSKE13D02. Match it with the FCC ID printed on your original remote.

Which blade profile does the Mazda 6 2016 key use?

The blades listed for this car: MZ27 · MAZ24 · MAZ24R.

Which tools program a Mazda 6 2016 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.