Skip to content

Mazda MX-5 2006–2008 Key Fob & Car Keys

Keys that fit the 2006–2008 Mazda MX-5: smart keys, flip keys and remote keys, 4 buttons, FCC ID BGBX1T478SKE12501 or BGBX1T458SKE11A01, 4D-63 (80-bit) chip, 315 MHz. 7 compatible keys, remotes & shells (genuine and aftermarket) available for the 2006 Mazda MX-5.

Last updated: 12 November 2026

Key specifications for the Mazda MX-5 2006–2008

Key types
smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz
Buttons
4-button
Transponder chip
4D-63 (80-bit)
Blade profile
MZ24 · MZ27 · MAZ24
Part numbers
D4Y1-76-2GXA
Battery
CR1616

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mazda parts catalogue, with the specifications on each listing. Every remote listed for the Mazda MX-5 2006–2008 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Mazda MX-5 2006 key

Smart key (push to start)

3 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    no PIN needed
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Add key

All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Lonsdor K518 lists add key only.

Key with a blade (regular or flip)

3 tools list this key. 3 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    no PIN needed
    • Add key
    • All keys lost
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost

Programming steps

Add key - on the car(US / Canada cars)

Needs: Flip key, key part (transponder), two working programmed keys, the new key, cut to turn the ignition

  1. Insert the first working key and turn ON for at least 1 second, until the red key symbol in the cluster goes out. Remove the key.
  2. Within 5 seconds, insert the second working key and turn ON for at least 1 second but no more than 5 seconds. Remove it.
  3. Within 10 seconds, insert the new key and turn the ignition ON.
  4. Success: the red key symbol comes on and goes out after about 1 second. Failure: the symbol flashes repeatedly; remove the key, wait 1 minute and try again.
Watch out: Timing is critical: 5 seconds for the second key, 10 seconds for the new key.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • All keys lost

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: Flip key, remote part, every remote to be programmed

  1. Remove the key from the ignition, close all doors, then open the driver's door.
  2. Within 24 seconds, turn the ignition ON and back to LOCK 3 times, then close and open the driver's door 3 times.
  3. The locks lock and unlock by themselves to confirm programming mode. If they do not, wait 40 seconds and start again from step 1.
  4. Press UNLOCK twice on each remote to be programmed. The locks lock and unlock after each remote.
  5. If the locks do not respond, close and open the driver's door once: the locks should lock and unlock twice. If they still do not, start the procedure again.
  6. Get out of the car and test every remote.
Watch out: The ignition and door cycles must be done within 24 seconds.

When the key changed

Smart key (push to start)

  • 2006 - 2015This yearChip: 4D-63FCC: BGBX1T458SKE11A01(US / Canada cars)Chip is in the emergency key, not in the fob
  • 2016 - 2019Chip: ID49315 MHzFCC: WAZSKE13D01(US / Canada cars)Push start on all ND trims, RF included
  • 2020 - 2023Chip: ID49315 MHzFCC: WAZSKE13D03(US / Canada cars)One catalog says Hitag AES; read the key

Key with a blade (regular or flip)

  • 2001 - 2005Chip: 8CImmobilizer optional on US cars
  • 2006 - 2015This yearChip: 4D-63Blade: MAZ24RFCC: BGBX1T478SKE125-01Flip remote key, 4D-63 80-bit

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Mazda MX-5 2006–2008?

7 listings fit the Mazda MX-5 2006–2008: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Mazda MX-5 2006–2008 remote use?

Every remote listed for the Mazda MX-5 2006–2008 transmits on 315 MHz.

Which transponder chip does the Mazda MX-5 2006–2008 key use?

The listings for this car carry: 4D-63 (80-bit). Check the chip in each listing's specifications.

Which FCC IDs do Mazda MX-5 2006–2008 remotes carry?

The remotes listed for this car carry FCC ID BGBX1T458SKE11A01 and BGBX1T478SKE12501. Match it with the FCC ID printed on your original remote.

Which blade profile does the Mazda MX-5 2006–2008 key use?

The blades listed for this car: MZ24 · MZ27 · MAZ24.

Which tools program a Mazda MX-5 2006–2008 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Lonsdor K518 and Launch X-431 IMMO for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Mazda MX-5 2006–2008 remote be programmed without a tool?

The remote is programmed on the car, without a tool.