Mini Cooper 2016 Key Fob & Car Keys
Keys that fit the 2015–2016 Mini Cooper: smart keys and remote keys, 3 or 4 buttons, FCC ID NBGIDGNG1, ID49 (HITAG Pro) chip, 433 MHz. 14 compatible keys, remotes & shells (genuine and aftermarket) available for the 2016 Mini Cooper.
Last updated: 14 November 2026
Key specifications for the Mini Cooper 2015–2016
- Key types
- smart keys, remote keys, key shells, emergency blades and key blanks
- Frequency
- 433 MHz
- Buttons
- 3- and 4-button
- Transponder chip
- ID49 (HITAG Pro)
- Blade profile
- HU100R
- Part numbers
- 9367409-01
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mini parts catalogue, with the specifications on each listing. Every remote listed for the Mini Cooper 2015–2016 transmits on 433 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $8.42In Stock
- $8.42In Stock
- $1.96In Stock
- $1.96In Stock
- $1.96In Stock
- $1.96In Stock
- $1.96In Stock
- $1.96In Stock
- $1.96In Stock
- $1.96In Stock
- $4.49In Stock
Programming the Mini Cooper 2016 key
Smart key (push to start)
4 tools list this key. 3 of them list all keys lost.
- All keys lost
Needs: Autel G-BOX3, Autel XP400 Pro- All keys lost
Needs: Autel G-BOX3, Autel XP400 Pro- Xhorse VVDI2
- All keys lost
Needs: Xhorse VVDI Prog - Add key
All keys lost is listed by Autel IM508S, Autel IM608 II / IM608 Pro II and Xhorse VVDI2. Xhorse VVDI Key Tool Plus lists add key only.
Programming steps
Add key - Xhorse VVDI Key Tool Plus (BMW FEM/BDC)
Needs: working key, blank BMW key, FEM / BDC bench platform if done on the bench, stable 12 V supply
- Connect by OBD (or put the BDC on a bench platform) and open IMMO programming, BMW, FEM/BDC immo system, Key function.
- Back up the coding and the EEPROM data first.
- If the module has not been prepared before, run the FEM / BDC programming step the tool asks for so it can read key info by OBD.
- Read the key info with the working key at the coil.
- Choose an unused position and generate the dealer key from the working key.
- Learn the new key, then test start and remote.
All keys lost - Autel MaxiIM IM608 / IM508S + XP400 Pro + G-BOX3
Needs: engine ISN (read from the DME with G-BOX3), EEPROM clip (APA103) or soldered leads, FEM / BDC bench platform, blank BMW key, stable 12 V supply
- Read the ISN from the DME with the G-BOX3 (bench or the wiring the tool shows) and keep a photo of it.
- Remove the BDC, put it on the bench platform, check the key frequency and back up the coding (FA).
- Open the module, clean the coating off the EEPROM legs (95128 / 95256) and read the EEPROM with the XP400 Pro; read it twice and compare, then save the original.
- Let the tool make the modified file, write it to the EEPROM, power the module and run the pre-processing by OBD.
- Write the original EEPROM back, refit and restore the coding.
- Open Key learning, Pre-processing learning, enter the ISN, then learn the new key at the coil.
- In the car, hold the key at the steering-column coil and press start to synchronise; test start and remote.
All keys lost - Xhorse VVDI2 (BMW) + VVDI Prog
Needs: engine ISN, VVDI Prog to read 95128 / 95256, blank BMW key, stable 12 V supply
- Back up the BDC coding by OBD.
- Remove the module, clean the EEPROM and read it with VVDI Prog several times until the reads match; save the original.
- In VVDI2 load the original EEPROM, save the service-mode file it generates and write that file to the chip.
- Refit the module, power it, connect OBD and run Program BDC.
- Write the original EEPROM back, refit the module and restore the coding.
- Read the engine data and work out the ISN, then prepare the dealer key with the ISN and learn it; test start and remote.
When the key changed
Smart key (push to start)
- 2007 - 2013Chip: ID46R56 (CAS3 / CAS3+) slot key; R57 / R60 to 2015-2016
- 2014 - 2023This yearChip: ID49F56 / F55 / F54 / F57 / F60, FEM / BDC
Key with a blade (regular or flip)
- 2002 - 2005Chip: ID44Blade: HU92R50 / R53, EWS3 remote head key
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Mini Cooper 2015–2016?
14 listings fit the Mini Cooper 2015–2016: smart keys, remote keys, key shells, emergency blades and key blanks, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Mini Cooper 2015–2016 remote use?
Every remote listed for the Mini Cooper 2015–2016 transmits on 433 MHz.
Which transponder chip does the Mini Cooper 2015–2016 key use?
The listings for this car carry: ID49 (HITAG Pro). Check the chip in each listing's specifications.
Which FCC IDs do Mini Cooper 2015–2016 remotes carry?
The remotes listed for this car carry FCC ID NBGIDGNG1. Match it with the FCC ID printed on your original remote.
Which blade profile does the Mini Cooper 2015–2016 key use?
The blades listed for this car: HU100R.
Which tools program a Mini Cooper 2015–2016 key?
The tool makers' coverage lists name Autel IM508S, Autel IM608 II / IM608 Pro II, Xhorse VVDI2 and Xhorse VVDI Key Tool Plus for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.













