Skip to content

Nissan Rogue 2015 Key Fob & Car Keys

Keys that fit the 2014–2015 Nissan Rogue: smart keys, flip keys and remote keys, 2, 3 or 4 buttons, FCC ID KR5S180144106, CWTWB1G767 or CWTWB1U751, PCF7939MA type, aftermarket or NXP PCF7936AA chip, 315 MHz or 433 MHz. 27 compatible keys, remotes & shells (genuine and aftermarket) available for the 2015 Nissan Rogue.

Last updated: 15 November 2026

Key specifications for the Nissan Rogue 2014–2015

Key types
smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz and 433 MHz
Buttons
2-, 3- and 4-button
Transponder chip
PCF7939MA type, aftermarket · NXP PCF7936AA · ID46 (HITAG 2) · 4A (HITAG AES) · In the emergency insert key, not included · CN3 cloning chip
Blade profile
NSN14 · DA34
Part numbers
H0561-3AA0B · 28268-4BA1A / H0561-4BA1A · H0561-4BA1A
Battery
CR2032 · CR2025

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Nissan parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Nissan Rogue 2015 key

Smart key (push to start)

3 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key(US / Canada cars)
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote(US / Canada cars)
    PIN read function
    • Universal key

Key with a blade (regular or flip)

2 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    PIN read function

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: working ignition key, every remote the customer keeps

  1. Sit inside, close all doors and lock them with the driver's power lock switch.
  2. Insert the key fully and pull it fully out at least 6 times within 10 seconds (about one per second) until the hazard lamps flash.
  3. Insert the key and turn it to ACC.
  4. Within 5 seconds press one button (LOCK) on the first remote once; the hazards flash.
  5. For each further remote, old ones too: unlock then lock with the driver's switch, then within 5 seconds press the next remote once.
  6. Turn the key OFF, remove it, unlock with the driver's switch and open the driver's door to leave the mode; test every remote.
Watch out: Entering this mode erases every remote: re-register the old ones too. Press each remote only once; a second press fails the registration. Remote buttons only: this does not program the immobiliser chip. Keyed-ignition cars only: not for Intelligent Key (push start) cars.

When the key changed

Smart key (push to start)

  • 2008 - 2013Chip: ID46315 MHzFCC: CWTWBU729(US / Canada cars)Intelligent Key trims (S35)
  • from 2014This yearChip: 4A433 MHzFCC: KR5S180144106, KR5TXN3, KR5TXN4, KR5TXPZ32021 on (T33): BCM reached through a 40-pin adapter

Key with a blade (regular or flip)

  • 2008 - 2015This yearChip: ID46315 MHzFCC: CWTWB1U751(US / Canada cars)Keyed-ignition trims; Rogue Select 2014-2015 keeps this key
  • 2014 - 2020This yearChip: 4A433 MHzFCC: CWTWB1G767(US / Canada cars)Flip key on keyed-ignition trims (T32)

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Nissan Rogue 2014–2015?

27 listings fit the Nissan Rogue 2014–2015: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Nissan Rogue 2014–2015 remote use?

Listings for the Nissan Rogue 2014–2015 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Nissan Rogue 2014–2015 key use?

The listings for this car carry: PCF7939MA type, aftermarket · NXP PCF7936AA · ID46 (HITAG 2) · 4A (HITAG AES) · In the emergency insert key, not included · CN3 cloning chip. Check the chip in each listing's specifications.

Which FCC IDs do Nissan Rogue 2014–2015 remotes carry?

The remotes listed for this car carry FCC ID CWTWB1G767, CWTWB1U751, CWTWBU729 and KR5S180144106. Match it with the FCC ID printed on your original remote.

Which blade profile does the Nissan Rogue 2014–2015 key use?

The blades listed for this car: NSN14 · DA34.

Which tools program a Nissan Rogue 2014–2015 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Autel KM100 (IKEY universal smart key) for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Nissan Rogue 2014–2015 remote be programmed without a tool?

The remote is programmed on the car, without a tool.