Nissan Sentra 2012 Key Fob & Car Keys
Keys that fit the 2012 Nissan Sentra: smart keys, flip keys and remote keys, 3 or 4 buttons, FCC ID CWTWBU735, KBRASTU15 or CWTWB1U751, NXP PCF7936AA or ID46 (HITAG 2) chip, 315 MHz or 433 MHz. 22 compatible keys, remotes & shells (genuine and aftermarket) available for the 2012 Nissan Sentra.
Last updated: 17 November 2026
Key specifications for the Nissan Sentra 2012
- Key types
- smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 315 MHz and 433 MHz
- Buttons
- 3- and 4-button
- Transponder chip
- NXP PCF7936AA · ID46 (HITAG 2) · In the emergency insert key, not included · CN3 cloning chip
- Blade profile
- NSN14
- Part numbers
- 28268-C991C · H0561-3AA0B · H0561-3AA0E
- Battery
- CR2025
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Nissan parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- Nissan / Infiniti 2002-2012 Keyless Entry Remote Rubber Button Pad 4-button with Trunk and Panic
SKU: B03034
$0.56In Stock - Nissan Maxima Sentra 2006-2012 Smart Key 4-button 315MHz - 285E3-EW82D - Genuine · OEM · New
SKU: B06058
$75.84In Stock - Nissan Maxima Sentra 2006-2012 Smart Key 4-button 315MHz - 285E3-EW82D - Genuine · OEM · Used
SKU: B00233
$33.71In Stock - Nissan Sentra Maxima 2006-2012 Smart Key TPU Cover 4-button Black Chrome - Fits Key 285E3-EW81D
SKU: B07704
$1.96In Stock - Nissan Sentra Maxima 2006-2012 Smart Key TPU Cover 4-button Black Gold - Fits Key 285E3-EW81D
SKU: B07706
$1.96In Stock - Nissan Sentra Maxima 2006-2012 Smart Key TPU Cover 4-button Black Metal - Fits Key 285E3-EW81D
SKU: B07707
$1.96In Stock - Nissan Sentra Maxima 2006-2012 Smart Key TPU Cover 4-button White Gold - Fits Key 285E3-EW81D
SKU: B07705
$1.96In Stock - Nissan Sentra Maxima 2007-2012 Smart Key 4-button 315MHz - 285E3-EW81D - Aftermarket · New
SKU: B04697
$28.09In Stock - $1.69Out of Stock
Programming the Nissan Sentra 2012 key
Smart key (push to start)
3 tools list this key. 2 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Universal key
Key with a blade (regular or flip)
4 tools list this key. 4 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
PIN read function - Advanced Diagnostics AD100 Pro / MVP Pro
- Add key(US / Canada cars)
- All keys lost(US / Canada cars)
- Advanced Diagnostics Smart Pro
- Add key(US / Canada cars)
- All keys lost(US / Canada cars)
Programming steps
Add key - Advanced Diagnostics Smart Pro / MVP Pro (Nissan CAN keyed ignition)(US / Canada cars)
Needs: working key (any one, to switch ON), PIN read by OBD (BCM code converted to 4-digit PIN by the tool), every key the customer keeps
- Gather every key the customer keeps; cut the new ID46 key so it turns the ignition.
- Connect by OBD and select Nissan > Sentra (keyed ignition, CAN / NATS 5) > program keys.
- Switch ON with a key in the barrel; the tool reads the BCM code by OBD and converts it to the 4-digit PIN (newer conversion on about 2009-on cars).
- Confirm programming; the BCM clears its stored keys at this point.
- With the key in the barrel, switch ON for about 8 seconds, then OFF and remove it.
- Insert the next key (new or existing), ON for about 8 seconds, OFF, remove; repeat for up to 4 keys.
- Close the session: switch ON again with the first key for about 8 seconds, then OFF.
- Start the engine with every key; program the remote buttons on board (separate case) if they do not work.
All keys lost - Advanced Diagnostics Smart Pro / MVP Pro (Nissan CAN keyed ignition)(US / Canada cars)
Needs: new keys cut to the lock (code or decode), PIN read by OBD (BCM code converted to 4-digit PIN by the tool)
- Cut two or more new ID46 keys to the lock (code or decode) so they turn the ignition.
- Connect by OBD and select Nissan > Sentra (keyed ignition, CAN / NATS 5) > program keys.
- Switch ON with a new key; the tool reads the BCM code and works out the 4-digit PIN (no working key needed).
- Confirm programming; the BCM clears all stored keys, the lost ones included.
- Key in, ON for about 8 seconds, OFF, remove; repeat with each new key (up to 4).
- Close the session: switch ON again with the first key for about 8 seconds, then OFF.
- Start the engine with every key, then program the remote buttons if they do not work.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
Without a tool
The remote is programmed on the car, without a tool.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: working ignition key, every remote the customer keeps
- Sit inside, close all doors and lock them with the driver's power lock switch.
- Insert the key fully and pull it fully out at least 6 times within 10 seconds (about one per second) until the hazard lamps flash.
- Insert the key and turn it to ACC.
- Within 5 seconds press one button (LOCK) on the first remote once; the hazards flash.
- For each further remote, old ones too: unlock then lock with the driver's switch, then within 5 seconds press the next remote once.
- Turn the key OFF, remove it, unlock with the driver's switch and open the driver's door to leave the mode; test every remote.
When the key changed
Smart key (push to start)
- 2007 - 2019This yearChip: ID46315 MHzFCC: CWTWBU735, CWTWB1U840(US / Canada cars)
- 2013 - 2019Chip: ID46433 MHzFCC: CWTWB1U787(GCC / Europe cars)Same smart key as the N17 Sunny
- from 2020Chip: 4A433 MHzFCC: KR5TXN4, KR5TXPZ3Gateway (16+32) or 40-pin BCM access needed
Key with a blade (regular or flip)
- 2000 - 2006Chip: 4D-60
- 2007 - 2019This yearChip: ID46FCC: CWTWB1U751Remote head key on most 2013-2019 (B17) cars
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Nissan Sentra 2012?
22 listings fit the Nissan Sentra 2012: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Nissan Sentra 2012 remote use?
Listings for the Nissan Sentra 2012 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.
Which transponder chip does the Nissan Sentra 2012 key use?
The listings for this car carry: NXP PCF7936AA · ID46 (HITAG 2) · In the emergency insert key, not included · CN3 cloning chip. Check the chip in each listing's specifications.
Which FCC IDs do Nissan Sentra 2012 remotes carry?
The remotes listed for this car carry FCC ID CWTWB1U751, CWTWB1U761, CWTWBU735, KBRASTU15 and PQTD0RM14. Match it with the FCC ID printed on your original remote.
Which blade profile does the Nissan Sentra 2012 key use?
The blades listed for this car: NSN14.
Which tools program a Nissan Sentra 2012 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Autel KM100 (IKEY universal smart key), Advanced Diagnostics AD100 Pro / MVP Pro, Advanced Diagnostics Smart Pro and Launch X-431 IMMO for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Nissan Sentra 2012 remote be programmed without a tool?
The remote is programmed on the car, without a tool.





















