Skip to content

Nissan Xterra 2003 Key Fob & Car Keys

Keys that fit the 2002–2004 Nissan Xterra: smart keys, flip keys and remote keys, 3 or 4 buttons, FCC ID KBRASTU15, 315 MHz. 3 compatible keys, remotes & shells (genuine and aftermarket) available for the 2003 Nissan Xterra.

Last updated: 17 November 2026

Key specifications for the Nissan Xterra 2002–2004

Key types
smart keys, flip keys, remote keys, transponder keys, key shells and emergency blades
Frequency
315 MHz
Buttons
3- and 4-button
Blade profile
NSN14
Part numbers
28268-C991C
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Nissan parts catalogue, with the specifications on each listing. Every remote listed for the Nissan Xterra 2002–2004 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Nissan Xterra 2003 key

Key with a blade (regular or flip)

One tool lists this key.

  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    PIN read function

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: working ignition key, every remote the customer keeps

  1. Sit inside, close all doors and lock them with the driver's power lock switch.
  2. Insert the key fully and pull it fully out at least 6 times within 10 seconds (about one per second) until the hazard lamps flash.
  3. Insert the key and turn it to ACC.
  4. Within 5 seconds press one button (LOCK) on the first remote once; the hazards flash.
  5. For each further remote, old ones too: unlock then lock with the driver's switch, then within 5 seconds press the next remote once.
  6. Turn the key OFF, remove it, unlock with the driver's switch and open the driver's door to leave the mode; test every remote.
Watch out: Entering this mode erases every remote: re-register the old ones too. Press each remote only once; a second press fails the registration. Remote buttons only: this does not program the immobiliser chip. Keyed-ignition cars only: not for Intelligent Key (push start) cars.

When the key changed

Key with a blade (regular or flip)

  • 2002 - 2004This yearChip: 4D-60Plain NI02T transponder key, separate keyless fob
  • 2005 - 2015Chip: ID46NI04T transponder key, separate keyless fob

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Nissan Xterra 2002–2004?

3 listings fit the Nissan Xterra 2002–2004: smart keys, flip keys, remote keys, transponder keys, key shells and emergency blades, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Nissan Xterra 2002–2004 remote use?

Every remote listed for the Nissan Xterra 2002–2004 transmits on 315 MHz.

Which FCC IDs do Nissan Xterra 2002–2004 remotes carry?

The remotes listed for this car carry FCC ID KBRASTU15. Match it with the FCC ID printed on your original remote.

Which blade profile does the Nissan Xterra 2002–2004 key use?

The blades listed for this car: NSN14.

Which tools program a Nissan Xterra 2002–2004 key?

The tool makers' coverage lists name XTOOL X100 PAD3 / X100 MAX for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.

Can the Nissan Xterra 2002–2004 remote be programmed without a tool?

The remote is programmed on the car, without a tool.