Skip to content
  1. Home
  2. Remote and Key Shell
  3. Remote Key Shell
  4. Nissan Flip Key Conversion Shell for 2002-2006 Keyless Remotes - 3+1-button · NSN14 Flip Blade Included - Aftermarket · New
Nissan Flip Key Conversion Shell for 2002-2006 Keyless Remotes - 3+1-button · NSN14 Flip Blade Included - Aftermarket · New

Nissan Flip Key Conversion Shell for 2002-2006 Keyless Remotes - 3+1-button · NSN14 Flip Blade Included - Aftermarket · New

Aftermarket

SKU: B02962

$4.21
AED  15.00

Fits Nissan Altima 2002–2006 ·

In Stock

Specifications

Nissan flip key conversion shell for 2002-2006 Altima / Maxima / Sentra / 350Z and other KBRASTU15-era models, shell only. Replaces KBRASTU15.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Aftermarket · New

Nissan 2002-2006 Flip Key Conversion Shell - 3+1-Button, NSN14

3+1-button · aftermarket replacement shell · no electronics, chip, or blade · NSN14 profile · replaces KBRASTU15

3+1
Buttons
NSN14
Blade profile
No
Electronics
Replaces
KBRASTU15

⭐ A flip-key conversion housing for the KBRASTU15 era: it takes the board out of the separate keyless fob that Altima, Maxima, Sentra, 350Z and their siblings carried through the early-2000s and rebuilds it into a single modern flip key with lock, unlock, trunk and panic plus a fold-out uncut NSN14 blade and its own battery space. The store has additionally verified this housing against part number H0561-5EF0C. A clean upsell for customers tired of carrying a fob and a bare metal key.

⚙️ Key features

Direct-fit replacement housing

Moulded to match the KBRASTU15 Nissan key so the original board, buttons, and blade transfer straight across without modification.

Restores a failed shell, not the electronics

Fixes the common failure - cracked case, worn button membrane, snapped blade slot - while the customer keeps their already-programmed electronics, so no key programming is needed.

Uncut NSN14 flip blade included

Ships with an uncut NSN14 flip blade fitted to the housing - cut it to the customer's bitting or copy the old one, then transfer the board and chip as usual.

💎 Benefits

Lower cost than a full key

Reusing the customer's working electronics turns a cracked Nissan key into a shell swap instead of a new-key-and-programming job, protecting margin on a common repair.

No reprogramming downtime

Because the programmed board and chip carry over, the repaired key works the moment it's reassembled - a while-you-wait counter job rather than a bench programming session.

Low-cost stock line

A cheap, fast-moving spare for any shop already seeing Nissan keys with cracked cases or worn buttons, with no license or tool dependency to hold it.

👥 Who it's for

Automotive locksmiths

Locksmiths refreshing worn or cracked Nissan keys as a quick counter repair.

Key shops

Shops offering while-you-wait Nissan shell swaps without touching the programmed electronics.

Garages and used-car dealers

Garages and dealers tidying up Nissan keys on trade-in or workshop stock.

🚗 Compatible vehicles

NISSAN Altima / Maxima / Sentra 2002-2006 - KBRASTU15 keyless remotes (315 MHz) -
NISSAN 350Z / Frontier / Xterra / Pathfinder / Murano / Armada / Quest - models carrying the KBRASTU15 fob (donor PNs 28268-ZB700 / 28268-C991C / 28268-5Y701) -
INFINITI Selected KBRASTU15-era models - match the donor fob before converting -
NISSAN Store-verified fit-on: part number H0561-5EF0C -
This is a conversion housing: it combines the board from a KBRASTU15-type keyless fob with an NSN14 flip blade in one modern body. Match the donor fob's FCC ID and check the vehicle's mechanical key is NSN14-profile before building the conversion.

📦 What's included

✅ IN THE BOX

✔ Nissan flip key conversion shell (3+1-button) - empty housing

✔ Button pad / key back as moulded

✔ Uncut NSN14 flip blade - fitted, requires cutting

❌ NOT INCLUDED

✘ Transponder chip - transfer from the customer's original key

✘ Circuit board / remote electronics - transfer from the original

✘ Battery - reuse or replace separately

📋 Specifications

🧰 SHELL
Type
Flip Key Conversion Shell
Buttons
3+1
Blade profile
NSN14 (blade sold separately)
FCC ID
KBRASTU15
🚗 FITMENT
Make
Nissan
Vehicles
Altima / Maxima / Sentra / 350Z and other KBRASTU15-era mode
Years
2002-2006
Function
Remote key
📦 PHYSICAL
Contents
Empty shell - no electronics
Condition
New, aftermarket
Chip
None - not included
Weight
40 g

🔧 Shell replacement - how to fit

🔑SHELL REPLACEMENT - TRANSFER YOUR PARTS

This is an empty replacement housing - it carries no electronics. Transfer the working parts from the customer's original Nissan key into it; no reprogramming is needed when those parts are reused.

Open the original key split the customer's original Nissan key and remove the circuit board, transponder chip, and battery.
Transfer the parts seat the board, chip, and battery into the new housing, then fit the button pad.
Cut the blade and test cut the supplied NSN14 flip blade to the original bitting (or copy the old blade), reassemble, then test every button and the immobiliser.
Verify coverage first: no reprogramming is needed when the original programmed electronics are reused; a new key and programming are only required if the customer's original board or chip is lost or destroyed.

Frequently Asked Questions

Common questions about this product

No. This is an empty flip key conversion shell only. It carries no transponder chip, circuit board, battery, or cut blade. Every working part transfers from the customer's original Nissan key, which is exactly why no reprogramming is required afterward.
No, provided the customer's original board and transponder chip are transferred into the new shell. Because the already-programmed electronics carry over, the key works immediately once reassembled. Reprogramming is only needed if the original electronics are lost or destroyed.
Yes. An uncut NSN14 flip blade ships fitted to the housing. Cut it to the customer's key code - by code or by copying the worn original - before returning the key. The blade carries no transponder; the chip transfers from the original key.
It replaces the KBRASTU15 Nissan key fitted to 2002-2006 models. Match that FCC ID and the NSN14 blade profile against the customer's original before ordering, since a single vehicle family can span several different shells across trims and years.
No. It is an aftermarket replacement housing, not a genuine Nissan-branded component. It is intended as a cost-effective shell swap for a cracked or worn key, reusing the customer's own programmed electronics rather than replacing the complete key assembly.
No. This flip key conversion shell ships as an empty housing with no battery fitted. Reuse the battery from the customer's original key or fit a fresh coin cell of the same type when transferring the electronics across into the new shell.
Yes. Fitting is a mechanical shell swap - open the original Nissan key, move the board and chip across, fit a blade, and test. No programmer or license is required as long as the original electronics are reused.

Last updated: 29 October 2026