Saturn Outlook 2010 Key Fob & Car Keys
Keys that fit the 2010 Saturn Outlook: smart keys and remote keys, 3 or 5 buttons, FCC ID 0UC60221 or 0UC60270, NXP PCF7936AA chip, 315 MHz. 3 compatible keys, remotes & shells (genuine and aftermarket) available for the 2010 Saturn Outlook.
Last updated: 12 November 2026
Key specifications for the Saturn Outlook 2010
- Key types
- smart keys, remote keys and key blanks
- Frequency
- 315 MHz
- Buttons
- 3- and 5-button
- Transponder chip
- NXP PCF7936AA
- Battery
- CR2032
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Saturn parts catalogue, with the specifications on each listing. Every remote listed for the Saturn Outlook 2010 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $7.02In Stock
Programming the Saturn Outlook 2010 key
Key with a blade (regular or flip)
2 tools list this key. 1 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Launch X-431 IMMO
- Add key
All keys lost is listed by OBDSTAR Key Master G3. Launch X-431 IMMO lists add key only.
Programming steps
Add key - on the car(US / Canada cars)
Needs: one working key, new key cut to the vehicle
- Cut the new key to the vehicle; have one key that already starts it.
- Put the working key in the ignition and turn it to ON/RUN (or start the engine), then turn it to LOCK/OFF and remove it.
- Within five seconds insert the new key and turn it to ON/RUN.
- The security light goes off when the key is learned (this can be too fast to notice).
- Start the engine with the new key; for each further key repeat from step 2.
All keys lost - on the car(US / Canada cars)
Needs: new key cut to the vehicle, 30 minutes
- Cut the new key. Have every key the customer keeps; the old keys stop working at the end.
- Insert the new key and turn to ON/RUN without cranking; the security light comes on.
- Wait about 10 minutes until the security light goes off, then turn to LOCK/OFF.
- Repeat ON/RUN, wait 10 minutes, LOCK/OFF two more times (about 30 minutes in all).
- After the third cycle turn OFF, then start the engine with this key: it is learned and every previously known key is erased.
- Learn the remaining keys with the add-key procedure.
Without a tool
The remote is programmed on the car, without a tool. Up to 8 remotes.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: Cars with Driver Information Center buttons, Every remote to be programmed, A key that fits the ignition
- Insert the key and turn it to ON to reach the Driver Information Center.
- Step through the vehicle information menu until the cluster reads PRESS TO RELEARN REMOTE KEY.
- Hold set/reset until the cluster reads REMOTE KEY LEARNING ACTIVE.
- Hold LOCK and UNLOCK together on the remote for about 15 seconds. A chime confirms it is stored.
- Repeat step 4 for each extra remote.
- Turn the key OFF and remove it to leave programming mode, then test the remotes.
Program the remote without a tool(US / Canada cars)
Needs: Cars without Driver Information Center buttons, Every remote to be programmed, A key that fits the ignition
- Put the car in Park (P) and turn the key to ON without cranking.
- Push the trip reset stem repeatedly until the cluster reads RELEARN REMOTE KEY.
- Hold the trip odometer reset stem for 3 seconds until REMOTE KEY LEARNING ACTIVE shows.
- Hold LOCK and UNLOCK together on the first remote for about 15 seconds. A chime confirms it is stored.
- Turn the key OFF and remove it to leave programming mode, then test the remotes.
When the key changed
Key with a blade (regular or flip)
- 2007 - 2010This yearChip: ID46Blade: B111(US / Canada cars)Circle Plus key; separate remote.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Saturn Outlook 2010?
3 listings fit the Saturn Outlook 2010: smart keys, remote keys and key blanks, in 3- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Saturn Outlook 2010 remote use?
Every remote listed for the Saturn Outlook 2010 transmits on 315 MHz.
Which transponder chip does the Saturn Outlook 2010 key use?
The listings for this car carry: NXP PCF7936AA. Check the chip in each listing's specifications.
Which FCC IDs do Saturn Outlook 2010 remotes carry?
The remotes listed for this car carry FCC ID 0UC60221 and 0UC60270. Match it with the FCC ID printed on your original remote.
Which tools program a Saturn Outlook 2010 key?
The tool makers' coverage lists name OBDSTAR Key Master G3 and Launch X-431 IMMO for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.
Can the Saturn Outlook 2010 remote be programmed without a tool?
The remote is programmed on the car, without a tool. Up to 8 remotes.


