Scion XB 2011–2012 Key Fob & Car Keys
Keys that fit the 2011–2012 Scion XB: flip keys, 2 buttons, FCC ID GQ429T, HYQ12BBY or HYQ12BDC, 4D-60 or 4D-72 (G) chip. 8 compatible keys, remotes & shells (genuine and aftermarket) available for the 2011 Scion XB.
Last updated: 17 November 2026
Key specifications for the Scion XB 2011–2012
- Key types
- flip keys, key shells, emergency blades and key blanks
- Buttons
- 2-button
- Transponder chip
- 4D-60 · 4D-72 (G)
- Blade profile
- TOY43
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Scion parts catalogue, with the specifications on each listing.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
Programming the Scion XB 2011 key
Key with a blade (regular or flip)
One tool lists this key.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
Without a tool
The remote is programmed on the car, without a tool.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: Add mode: add a remote and keep the stored ones, Every remote to be programmed, A key that fits the ignition
- Start with the key out, the driver's door open and unlocked.
- Insert the key and pull it out, then within 5 seconds insert it and pull it out again.
- Inside 40 seconds: shut and open the driver's door two times, then put the key in and take it out once.
- Inside the next 40 seconds: shut and open the driver's door two times, put the key in, leave it, and shut the door.
- Turn the ignition LOCK to ON to OFF once, about one second ON and one second OFF each time.
- Remove the key. The doors lock and unlock once.
- Within 40 seconds, press LOCK and UNLOCK together on the remote and release.
- Within 3 seconds, press either button and release. The doors cycle once if the remote is stored, twice if it failed.
- For each extra remote, go back to step 7 within 40 seconds.
- Insert the key in the ignition or open a door to finish.
Program the remote without a tool(US / Canada cars)
Needs: Rewrite mode: erase all remotes and store new ones, Every remote the customer keeps, A key that fits the ignition
- Start with the key out, the driver's door open and unlocked.
- Insert the key and pull it out, then within 5 seconds insert it and pull it out again.
- Inside 40 seconds: shut and open the driver's door two times, then put the key in and take it out once.
- Inside the next 40 seconds: shut and open the driver's door two times, put the key in, leave it, and shut the door.
- Turn the ignition LOCK to ON to OFF twice, about one second ON and one second OFF each time.
- Remove the key. The doors lock and unlock twice: rewrite mode is on.
- Within 40 seconds, press LOCK and UNLOCK together on the remote and release.
- Within 3 seconds, press either button and release. The doors cycle once if the remote is stored, twice if it failed.
- For each extra remote, go back to step 7 within 40 seconds.
- Insert the key in the ignition or open a door to finish.
Program the remote without a tool(US / Canada cars)
Needs: Confirmation mode: count the stored remotes, A key that fits the ignition
- Start with the key out, the driver's door open and unlocked.
- Insert the key and pull it out, then within 5 seconds insert it and pull it out again.
- Inside 40 seconds: shut and open the driver's door two times, then put the key in and take it out once.
- Inside the next 40 seconds: shut and open the driver's door two times, put the key in, leave it, and shut the door.
- Turn the ignition LOCK to ON to OFF three times, about one second ON and one second OFF each time.
- Remove the key. The doors lock and unlock about every 2 seconds: the number of cycles is the number of stored remotes; 5 cycles mean none is stored.
Program the remote without a tool(US / Canada cars)
Needs: Prohibition mode: erase all remotes and switch off remote locking, A key that fits the ignition
- Start with the key out, the driver's door open and unlocked.
- Insert the key and pull it out, then within 5 seconds insert it and pull it out again.
- Inside 40 seconds: shut and open the driver's door two times, then put the key in and take it out once.
- Inside the next 40 seconds: shut and open the driver's door two times, put the key in, leave it, and shut the door.
- Turn the ignition LOCK to ON to OFF five times, about one second ON and one second OFF each time.
- Remove the key. The doors lock and unlock 5 times about 1 second apart.
When the key changed
Key with a blade (regular or flip)
- 2008 - 2010Chip: 4D-67315 MHzFCC: HYQ12BBY(US / Canada cars)Cars without anti-theft use a non-transponder key
- 2013 - 2014Chip: H (8A)315 MHzFCC: HYQ12BDP(US / Canada cars)Anti-theft cars; others use a non-transponder 89070-12590 key
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Scion XB 2011–2012?
8 listings fit the Scion XB 2011–2012: flip keys, key shells, emergency blades and key blanks, in 2-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
Which transponder chip does the Scion XB 2011–2012 key use?
The listings for this car carry: 4D-60 · 4D-72 (G). Check the chip in each listing's specifications.
Which FCC IDs do Scion XB 2011–2012 remotes carry?
The remotes listed for this car carry FCC ID GQ429T, HYQ12BBY, HYQ12BDC and M0ZB41TG. Match it with the FCC ID printed on your original remote.
Which blade profile does the Scion XB 2011–2012 key use?
The blades listed for this car: TOY43.
Which tools program a Scion XB 2011–2012 key?
The tool makers' coverage lists name OBDSTAR Key Master G3 for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.
Can the Scion XB 2011–2012 remote be programmed without a tool?
The remote is programmed on the car, without a tool.







