Skip to content

Scion XD 2011–2012 Key Fob & Car Keys

Keys that fit the 2011–2012 Scion XD: remote keys, 3 buttons, FCC ID M0ZB41TG, 4D-60 or 4D-72 (G) chip, 312 MHz or 315 MHz. 7 compatible keys, remotes & shells (genuine and aftermarket) available for the 2011 Scion XD.

Last updated: 12 November 2026

Key specifications for the Scion XD 2011–2012

Key types
remote keys and key blanks
Frequency
312 MHz and 315 MHz
Buttons
3-button
Transponder chip
4D-60 · 4D-72 (G)
Blade profile
TOY43
Battery
CR2016
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Scion parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 312 MHz and 315 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Scion XD 2011 key

Key with a blade (regular or flip)

2 tools list this key. 2 of them list all keys lost.

Programming steps

Add key - Autel MaxiIM IM508 / IM608(US / Canada cars)

Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)

  1. Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
  2. Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer, then the key learning function.
  3. Insert the working master key and switch the ignition on when asked.
  4. Remove it, insert the new cut key and leave the ignition off (if learning fails, run it again with the ignition on).
  5. Wait for the security light to go out: the key is learned. Check it switches on and starts.
  6. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Watch out: A valet key cannot add keys: you need a master key. Use the chip family the car already has: a 4D key will not learn on a G car, a G key not on an H car.
All keys lost - Autel MaxiIM IM508 / IM608(US / Canada cars)

Needs: new keys cut to the car with blank 4D-67/68 or G chips, no PIN entry (the tool resets by OBD)

  1. Cut the new keys first, with the chip family of the car (4D-67/68 or G).
  2. Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer > All keys lost (immobilizer reset).
  3. Answer how many keys you will register and keep the driver door open during learning.
  4. Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets the immobilizer.
  5. Within 120 s register the keys: insert a master key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
  6. The security light goes out when programming is done. Test every key.
  7. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Watch out: The reset erases every registered key: bring every key the customer will keep and program them in the same session. You have about 120 s after the reset to register the keys; have them cut and on the bench before you start. Battery charged and steady during the reset. Not for H (8A) blade cars: no all-keys-lost route for them is written for this model.

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: Every remote to be programmed, A key that fits the ignition

  1. Start with the key out of the ignition.
  2. Open and unlock the driver's door; close all other doors and the trunk.
  3. Within 5 seconds, insert the key and pull it out, two times.
  4. Close and open the driver's door two times.
  5. Insert the key and pull it out once.
  6. Close and open the driver's door two times.
  7. Insert the key, leave it in, and close the driver's door.
  8. Turn the ignition ON, then OFF, and remove the key. The locks cycle: the car is in programming mode.
  9. On the first remote, hold LOCK and UNLOCK together for 1.5 seconds; as soon as you release, hold LOCK alone for 2 seconds.
  10. The locks cycle to confirm the remote is stored. Repeat step 9 for each extra remote.
  11. Open the driver's door to finish.

When the key changed

Key with a blade (regular or flip)

  • 2008 - 2010Chip: 4D-67FCC: MOZB41TG(US / Canada cars)Cars without anti-theft use a non-transponder key
  • 2011 - 2012This yearChip: GFCC: MOZB41TG(US / Canada cars)Anti-theft cars; non-transponder keys exist for others

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Scion XD 2011–2012?

7 listings fit the Scion XD 2011–2012: remote keys and key blanks, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Scion XD 2011–2012 remote use?

Listings for the Scion XD 2011–2012 come in 312 MHz and 315 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Scion XD 2011–2012 key use?

The listings for this car carry: 4D-60 · 4D-72 (G). Check the chip in each listing's specifications.

Which FCC IDs do Scion XD 2011–2012 remotes carry?

The remotes listed for this car carry FCC ID M0ZB41TG. Match it with the FCC ID printed on your original remote.

Which blade profile does the Scion XD 2011–2012 key use?

The blades listed for this car: TOY43.

Which tools program a Scion XD 2011–2012 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 and Autel IM608 II / IM608 Pro II for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Scion XD 2011–2012 remote be programmed without a tool?

The remote is programmed on the car, without a tool.