Skip to content

Suzuki Grand Vitara 2013 Key Fob & Car Keys

Keys that fit the 2012–2014 Suzuki Grand Vitara: smart keys and remote keys, 2 buttons, FCC ID TS001, 433 MHz. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2013 Suzuki Grand Vitara.

Last updated: 18 November 2026

Key specifications for the Suzuki Grand Vitara 2012–2014

Key types
smart keys, remote keys and key shells
Frequency
433 MHz
Buttons
2-button
Blade profile
HU133
Part numbers
37172-62JV0
Battery
CR1620
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Suzuki parts catalogue, with the specifications on each listing. Every remote listed for the Suzuki Grand Vitara 2012–2014 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Suzuki Grand Vitara 2013 key

Smart key (push to start)

One tool lists this key.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD

Key with a blade (regular or flip)

One tool lists this key.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key

Without a tool

The remote is programmed on the car, without a tool. Up to 4 remotes.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: Separate key and remote, Every remote to be programmed, A key that fits the ignition

  1. Remove the key and close all doors.
  2. Open the driver's door.
  3. Insert the key, turn it to ON, and within 10 seconds turn it OFF and remove it.
  4. Within 20 seconds, close and open the driver's door 3 times.
  5. Insert the key, turn it to ON, and within 10 seconds turn it OFF and remove it.
  6. The locks lock and unlock by themselves: the car is in programming mode.
  7. Press UNLOCK on the remote. The locks cycle to confirm it is stored.
  8. Repeat step 7 for each extra remote.
  9. Get out with the keys and remotes, close the door and test the remotes.
Program the remote without a tool(US / Canada cars)

Needs: Cars with the Smart Key System, Every smart remote the customer keeps, A key that fits the ignition and starts the engine

  1. Close all doors, sit in the driver's seat and check that the driver's door is unlocked.
  2. Insert the key into the ignition switch.
  3. Within 25 seconds of inserting the key, push the driver's power lock switch to lock then unlock, 3 times in all.
  4. Push the lock switch to lock once more.
  5. Remove the key and insert it again, then repeat this 3 more times.
  6. Turn the ignition to START, start the engine and wait 3 seconds. Steps 3 to 6 must fit in the 25 seconds.
  7. Within 60 seconds of the engine starting, turn the ignition to LOCK. The buzzer sounds twice and the door lock switch moves from lock to unlock by itself.
  8. Within 30 seconds, press LOCK, UNLOCK or PANIC on the smart remote. The buzzer sounds twice and the lock switch moves to unlock. Repeat for each extra remote.
  9. Remove the key or turn the ignition to ON to finish.
  10. Check keyless entry and keyless start with every remote; if one fails, repeat the whole procedure.
Watch out: Up to 4 remotes can be stored. Programming erases all old codes: program every remote in the same session, a remote left out will not work. Programming a fifth code clears the four stored codes. Time windows: 25 seconds from key insertion to engine start, 60 seconds after start, 30 seconds per remote.

When the key changed

Smart key (push to start)

  • 2008 - 2015This yearChip: ID46433 MHzFCC: TS001(GCC / Europe cars)Fob 37172-62JV0 has no chip; the ID46 chip sits in the emergency key
  • 2015 - 2019Chip: ID47433 MHzFCC: R64M0(GCC / Europe cars)LY model sold as Grand Vitara in the Middle East, key 37172-54P01

Key with a blade (regular or flip)

  • 2005 - 2014This yearChip: ID46(GCC / Europe cars)JT Grand Vitara transponder or remote key, HU133 blade

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Suzuki Grand Vitara 2012–2014?

4 listings fit the Suzuki Grand Vitara 2012–2014: smart keys, remote keys and key shells, in 2-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Suzuki Grand Vitara 2012–2014 remote use?

Every remote listed for the Suzuki Grand Vitara 2012–2014 transmits on 433 MHz.

Which FCC IDs do Suzuki Grand Vitara 2012–2014 remotes carry?

The remotes listed for this car carry FCC ID TS001. Match it with the FCC ID printed on your original remote.

Which blade profile does the Suzuki Grand Vitara 2012–2014 key use?

The blades listed for this car: HU133.

Which tools program a Suzuki Grand Vitara 2012–2014 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 and Launch X-431 IMMO for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.

Can the Suzuki Grand Vitara 2012–2014 remote be programmed without a tool?

The remote is programmed on the car, without a tool. Up to 4 remotes.