Suzuki SX4 2009 Key Fob & Car Keys
Keys that fit the 2008–2011 Suzuki SX4: smart keys and transponder keys, 2 buttons, FCC ID TS001. 3 compatible keys, remotes & shells (genuine and aftermarket) available for the 2009 Suzuki SX4.
Last updated: 12 November 2026
Key specifications for the Suzuki SX4 2008–2011
- Key types
- smart keys, transponder keys, key shells, emergency blades and key blanks
- Buttons
- 2-button
- Blade profile
- HU133
- Part numbers
- 37172-62JV0 · 37145-63J60 · 37145-57J10
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Suzuki parts catalogue, with the specifications on each listing.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $7.01In Stock
- $1.40In Stock
Programming the Suzuki SX4 2009 key
Smart key (push to start)
One tool lists this key.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD
Key with a blade (regular or flip)
One tool lists this key.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
Without a tool
The remote is programmed on the car, without a tool. No working key is needed. Up to 4 remotes.
Programming steps
Program the remote without a tool
Needs: working key or emergency blade in the ignition, every remote / keyless-start fob the customer keeps
- Sit in the driver's seat, close all doors, make sure the driver's door is unlocked, insert the key (do not turn).
- Within 25 seconds: lock-unlock the driver's door lock 3 times, then lock once more.
- Still inside the 25 seconds: pull the key out and push it back in 4 times.
- Start the engine and let it run 3 seconds, then switch OFF (leave the key in): the buzzer sounds twice and the locks cycle, registration mode is on.
- Within 30 seconds press LOCK or UNLOCK on the remote; the buzzer sounds twice and the locks cycle.
- Repeat for each further remote within 30 seconds (up to 4).
- Remove the key or turn to ON to leave registration mode; test every remote.
Program the remote without a tool(US / Canada cars)
Needs: working ignition key, every remote the customer keeps (up to 4)
- Close all doors with the key out of the ignition, then open the driver's door and leave it open.
- Insert the key, turn it to ON, and within 10 seconds turn it OFF and pull it out.
- Within 20 seconds close and open the driver's door 3 times (or press the door-jamb switch 3 times).
- Within 10 seconds insert the key, turn it to ON, then OFF and pull it out: the locks lock and unlock once (programming mode).
- Within 20 seconds press UNLOCK on the remote; the locks cycle to confirm.
- For each further remote run the routine again from step 1, then close the door and test every remote.
When the key changed
Smart key (push to start)
- 2007 - 2013This yearChip: ID46315 MHzFCC: KBRTS003(US / Canada cars)Keyless start fob 37172-64J00 with emergency blade (SUZ20 keyway)
- 2014 - 2022Chip: ID47433 MHz(GCC / Europe cars)S-Cross keyless key 37172-61M0x or 37172-68P1x; read the part number
Key with a blade (regular or flip)
- 2006 - 2014This yearChip: ID46433 MHz(GCC / Europe cars)Diesel (Fiat engine) cars use an ID40 key; HU133 blade
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Suzuki SX4 2008–2011?
3 listings fit the Suzuki SX4 2008–2011: smart keys, transponder keys, key shells, emergency blades and key blanks, in 2-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
Which FCC IDs do Suzuki SX4 2008–2011 remotes carry?
The remotes listed for this car carry FCC ID TS001. Match it with the FCC ID printed on your original remote.
Which blade profile does the Suzuki SX4 2008–2011 key use?
The blades listed for this car: HU133.
Which tools program a Suzuki SX4 2008–2011 key?
The tool makers' coverage lists name OBDSTAR Key Master G3 and Launch X-431 IMMO for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.
Can the Suzuki SX4 2008–2011 remote be programmed without a tool?
The remote is programmed on the car, without a tool. No working key is needed. Up to 4 remotes.


