SKU: B04763
Toyota C-HR 2019 Key Fob & Car Keys
Keys that fit the 2019 Toyota C-HR: smart keys, flip keys and transponder keys, 2 or 3 buttons, FCC ID M0ZBR1ET, 8A (H-chip) or TRPWS21 chip, 315 MHz. 13 compatible keys, remotes & shells (genuine and aftermarket) available for the 2019 Toyota C-HR.
Last updated: 17 November 2026
Key specifications for the Toyota C-HR 2019
- Key types
- smart keys, flip keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 315 MHz
- Buttons
- 2- and 3-button
- Transponder chip
- 8A (H-chip) · TRPWS21
- Blade profile
- TOY48
- Part numbers
- 89904-F4020
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. Every remote listed for the Toyota C-HR 2019 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- Lonsdor Super ADP 8A/4A Adapter for Toyota Lexus 2013-2021 Smart Key Programming - K518 Series$182.58
$210.67In Stock - $0.42In Stock
- $21.07In Stock
- Toyota XSTO01EN Smart Key Shell 2-Button for Xhorse Board with TOY48 Blade - Aftermarket · New
SKU: B02568
$2.81In Stock - $154.49Out of Stock
Programming the Toyota C-HR 2019 key
Smart key (push to start)
7 tools list this key. 7 of them list all keys lost.
- Advanced Diagnostics Smart Pro
- Add key
- All keys lost
- Remote
online calculationNeeds: AD ADC2000B cable - OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
- Add key
- All keys lost
- Add key
- All keys lost
- Add key
- All keys lost
- Universal key
no PIN needed- Add key
- All keys lost
- Universal key
no PIN needed- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
Programming steps
Add key - Autel MaxiIM IM508 / IM608
Needs: working smart key, new smart key, internet connection
- IMMO > Toyota > select the model > Smart key > (8A) > Control unit > Keyless system (CAN) > Back up IMMO data, by OBD, and save the file.
- Add smart key: load the file, switch on, follow the prompts (ignition off, hazards on).
- Working key to the Start button until one beep, then the new key until two beeps.
- Switch on, touch a learned key to the Start button, then test start and remote.
Add key - Lonsdor K518ISE / K518S / K518 Pro
Needs: working smart key, Lonsdor Super ADP 8A/4A adapter when the OBD backup fails, new smart key, internet connection
- Immo & Remote > Toyota > Select from type > All smart key lost (2016-) > 8A or 4A > Backup immo data, by OBD or with the ADP adapter on the smart box; save the data.
- Add smart key: switch on with the working key, then ignition off and hazards on when asked; load the saved data.
- Working key to the Start button until one beep, then within 30 s the new key until two beeps.
- Switch on, touch a programmed key to the Start button, then test start and remote.
Add key - Xhorse VVDI Key Tool Plus
Needs: working smart key, Xhorse XD8ASKGL Toyota 8A smart key adapter (TOY-C1 / TOY-C2 cables), new smart key (OEM or Xhorse XM38), internet connection
- Identify the original key type (8A or 4A) with the Key Tool Plus.
- Connect OBD > Key Tool Plus OBD cable > XD8ASKGL adapter > tablet; connect the smart box to the adapter with the TOY-C1 or TOY-C2 cable that fits its plug.
- Toyota immo menu > Backup smart box EEPROM data (online); save the file, then refit the smart box plug.
- Add smart key: switch on, then off, hazards on; load the saved file. The tool shows registered and free positions.
- Working key to the Start button until it beeps, then each new key in turn until it beeps.
- Switch on and test start and remote of every key.
All keys lost - Autel MaxiIM IM508 / IM608
Needs: APB112 smart key simulator, XP400 (IM508), new smart key, internet connection, no PIN entry
- IMMO > Toyota > select the model > Smart key > (8A) > Control unit > Keyless system (CAN) > Back up IMMO data. Use the VCI on USB, not Bluetooth.
- With the ignition off, turn the hazard lights on and off once and press Start 5 times when asked; back up by OBD and save the EEPROM file.
- Generate analog key: load the file, connect the APB112, keep it powered and near the Start button, press Start and follow the prompts until it is generated.
- Add smart key: load the same file, switch on, enter the VIN, switch off and turn the hazards on.
- APB112 to the Start button until one beep, then the new key until two beeps.
- Switch on, touch a learned key to the Start button, then test start and remote.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro
Needs: LKE emulator (K518ISE / K518S), Lonsdor Super ADP 8A/4A adapter when the OBD backup fails, new smart key (OEM or Lonsdor FT key), internet connection, no PIN from the dealer (the 12-digit code is derived from the backup)
- Bind the LKE emulator to the K518ISE / K518S (the K518 Pro generates the emergency key without an LKE).
- Immo & Remote > Toyota > Select from type > All smart key lost (2016-) > 8A or 4A > Backup immo data. Try by OBD first; if it fails, connect the ADP adapter between the smart box and its harness.
- Turn the hazard lights on when asked, enter the VIN if asked, let the tool calculate online and save the data.
- Refit the smart box plug, connect by OBD, put the LKE in the card slot and generate the emergency key from the saved data.
- Add smart key: switch on with the LKE at the Start button, then ignition off and hazards on when asked; load the saved data.
- Registered key (LKE) to the Start button until one beep, then within 30 s the new key until two beeps.
- Switch on and touch a programmed key to the Start button (one beep), then test start and remote.
- Delete lost keys with Delete smart key if the customer wants them gone.
Key with a blade (regular or flip)
5 tools list this key. 4 of them list all keys lost.
- Advanced Diagnostics Smart Pro
- Add key
- All keys lost
- Remote
online calculationNeeds: AD ADC2000B cable - Launch X-431 IMMO
- Add key
- All keys lost
- Remote
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
- Add key(US / Canada cars)
All keys lost is listed by Advanced Diagnostics Smart Pro, Launch X-431 IMMO, OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Autel IM608 II / IM608 Pro II lists add key only.
Programming steps
Add key - Autel MaxiIM IM508 / IM608(US / Canada cars)
Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)
- Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
- Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer, then the key learning function.
- Insert the working master key and switch the ignition on when asked.
- Remove it, insert the new cut key and leave the ignition off (if learning fails, run it again with the ignition on).
- Wait for the security light to go out: the key is learned. Check it switches on and starts.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Key type not stated by the list
One tool lists this key.
- Add key
- All keys lost
- Remote
- Universal key
When the key changed
Smart key (push to start)
- 2017 - 2023This yearChip: 8A433 MHz(GCC / Europe cars)Page A9 smart key (BR2EX)
- 2018 - 2022This yearChip: 8A315 MHzFCC: MOZBR1ET(US / Canada cars)Page A9 smart key, board 0010
Key with a blade (regular or flip)
- 2018 - 2022This yearChip: H (8A)(US / Canada cars)Turn-key trims: H transponder key or flip key
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Toyota C-HR 2019?
13 listings fit the Toyota C-HR 2019: smart keys, flip keys, transponder keys, key shells, emergency blades and key blanks, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Toyota C-HR 2019 remote use?
Every remote listed for the Toyota C-HR 2019 transmits on 315 MHz.
Which transponder chip does the Toyota C-HR 2019 key use?
The listings for this car carry: 8A (H-chip) · TRPWS21. Check the chip in each listing's specifications.
Which FCC IDs do Toyota C-HR 2019 remotes carry?
The remotes listed for this car carry FCC ID M0ZBR1ET. Match it with the FCC ID printed on your original remote.
Which blade profile does the Toyota C-HR 2019 key use?
The blades listed for this car: TOY48.
Which tools program a Toyota C-HR 2019 key?
The tool makers' coverage lists name Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, Lonsdor K518, Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus for this car; 6 of them list all keys lost. Check your tool's latest coverage list before the job.












