Skip to content

Toyota Camry 2016 Key Fob & Car Keys

Keys that fit the 2016 Toyota Camry: smart keys, flip keys and remote keys, 3 or 4 buttons, FCC ID B74TA, HYQ12BEL or HYQ14FBA, 8A+4D or 8A (H-chip) chip, 315 MHz or 433 MHz. 40 compatible keys, remotes & shells (genuine and aftermarket) available for the 2016 Toyota Camry.

Last updated: 17 November 2026

Key specifications for the Toyota Camry 2016

Key types
smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz and 433 MHz
Buttons
3- and 4-button
Transponder chip
8A+4D · 8A (H-chip) · TRPWS21 · 4D-72 (G) · 24C16 EEPROM
Blade profile
TOY43 · TOY48 · VA2 · TOY51
Part numbers
89904-33460 · 89070-33B40 · 89070-06421 / 89070-02880 · 89904-06140 · 89070-02B40 · 89070-02880 / 89070-02882
Battery
CR2032 · CR2016

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Toyota Camry 2016 key

Smart key (push to start)

7 tools list this key. 7 of them list all keys lost.

Programming steps

Add key - Autel MaxiIM IM508 / IM608

Needs: working smart key, new smart key for the car, internet connection (if the tool asks for the data backup)

  1. Connect the VCI to OBD. IMMO > Toyota > select the model > Smart key > Keyless system (CAN).
  2. If the tool asks for it, run Back up IMMO data first (online) and save the file.
  3. Add smart key: switch the ignition on with the working key, follow the prompts (ignition off, hazard lights on where asked).
  4. Hold the working key to the Start button until one beep, then the new key until two beeps.
  5. Switch on, touch a learned key to the Start button, then test start and the remote buttons.
Watch out: Bring every key the customer keeps; check the remote buttons on each after programming. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.
All keys lost - Autel MaxiIM IM508 / IM608

Needs: APB112 smart key simulator, XP400 (IM508), new smart key for the car (OEM or Xhorse / Autel universal), internet connection, no PIN entry (data read by OBD)

  1. Connect the VCI to OBD (and the APB112 to the tablet). IMMO > Toyota > select the model > Smart key > Keyless system (CAN).
  2. Back up IMMO data (online): the tool reads the smart box EEPROM by OBD; save the file.
  3. Generate simulator key: load the saved file, confirm the key type, connect the APB112 and let it be written.
  4. Hold the APB112 against the Start button and press Start: the dashboard comes on.
  5. Add smart key: say yes to using the simulator; hold the APB112 to the Start button until one beep, then the new key until two beeps.
  6. Wait for Registering to finish, then test start and the remote buttons of the new key.
  7. If the customer wants the lost keys gone, delete the keys not present with the tool's key erase function.
Watch out: The car battery must be charged; the data backup needs an internet connection. The simulator / emulator is erased if you use the device for another key job before adding the key: add the new key straight after generating it. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.

Key with a blade (regular or flip)

10 tools list this key. 8 of them list all keys lost.

All keys lost is listed by Advanced Diagnostics Smart Pro, Launch X-431 IMMO, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Autel IM608 II / IM608 Pro II, Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus and Xhorse VVDI2. Lonsdor K518 lists add key only.

Programming steps

Add key - Autel MaxiIM IM508 / IM608

Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)

  1. Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
  2. Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer, then the key learning function.
  3. Insert the working master key and switch the ignition on when asked.
  4. Remove it, insert the new cut key and leave the ignition off (if learning fails, run it again with the ignition on).
  5. Wait for the security light to go out: the key is learned. Check it switches on and starts.
  6. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Watch out: A valet key cannot add keys: you need a master key. Use the chip family the car already has: a 4D key will not learn on a G car, a G key not on an H car.
Add key - Lonsdor K518ISE / K518S / K518 Pro

Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)

  1. Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
  2. Connect the K518 by OBD. Immobilizer > Toyota > select the model and year (or the 4D-G type menu) > Mechanical key > Add key.
  3. Insert the master key and switch the ignition on.
  4. When asked, insert the new cut key and switch the ignition on and off as the tool prompts.
  5. Wait until the tool reports the key programmed, then test that it starts.
  6. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Watch out: A valet key cannot add keys: you need a master key. Use the chip family the car already has: a 4D key will not learn on a G car, a G key not on an H car.
All keys lost - Autel MaxiIM IM508 / IM608(GCC / Europe cars)

Needs: XP400 / XP400 Pro (IM508), G-Box2 or G-Box3, Autel Toyota 8A blade all-keys-lost cable kit, APB112 smart key simulator, blade key without chip (to turn the ignition), new H (8A) key cut to the car, internet connection

  1. IMMO > Toyota > select the model > Blade key > Immobilizer (H 8A/8E) > All keys lost (8A AKL cable). Use the VCI on USB, not Bluetooth.
  2. Wire the 8A kit as the tool's diagram shows for this car: IG and BAT fuses in the fuse boxes and the ignition switch (KSW) plug; connect G-Box and kit to the tablet and OBD.
  3. Insert a blade without chip, switch on and let the tool read the immobilizer data (can take several minutes).
  4. Confirm the key type, connect the APB112 and let the tool write the simulator key.
  5. Switch off, remove the kit and refit every fuse and plug as original; connect the VCI straight to OBD.
  6. Hold the APB112 against the ignition switch, turn the chipless blade on, then enter the add key step when asked.
  7. Switch off, take the APB112 away, insert the new H key without turning it and wait (5 to 180 s) until the security light goes out.
  8. Test start; program the remote of a remote-head key with the remote learning function.
Watch out: Put every fuse and plug back before starting the car: Xhorse warns the fuse box and the device can burn otherwise. Not for North American H cars (both makers say so); US cars need another route.
All keys lost - Xhorse VVDI2 / VVDI Key Tool Max + Mini OBD / Key Tool Plus(GCC / Europe cars)

Needs: Xhorse Toyota 8A non-smart key all-keys-lost adapter (one adapter binds to one device), new H (8A) key cut to the car, internet connection (server calculation)

  1. Update the device. Disconnect the battery negative before wiring.
  2. Connect the adapter as the Xhorse guide shows for the car: fuse-box plug, ignition (lock) plug after unplugging the original, OBD, then the battery clamps.
  3. Toyota 8A immobilizer menu: run Immobox (8A) all key lost - OBD, make master key directly, with the new key in the device coil.
  4. Wait for the online calculation; the device writes a master key that starts the car.
  5. Disconnect every cable and restore the original fuses and plugs before you start the car.
  6. Test the new key; add more keys with the normal OBD add-key function.
Watch out: Put every fuse and plug back before starting the car: Xhorse warns the fuse box and the device can burn otherwise. Not for North American H cars (both makers say so); US cars need another route.

Key type not stated by the list

One tool lists this key.

Without a tool

The remote is not programmed on the car by hand: it needs a tool or a dealer.

When the key changed

Smart key (push to start)

  • 2007 - 2011Chip: 4D315 MHzFCC: HYQ14AAB(US / Canada cars)Push-to-start trims only
  • 2012 - 2024This yearChip: 8A315 MHzFCC: HYQ14FBA, HYQ14FBC, HYQ14FLA(US / Canada cars)FCC id changes in 2018 (FBA to FBC / FLA)
  • 2013 - 2020This yearChip: 8A433 MHz(GCC / Europe cars)
  • from 2025Chip: 4A315 MHzFCC: HYQ14FBW(US / Canada cars)

Key with a blade (regular or flip)

  • 1998 - 2002Chip: 4CBlade: TOY432003-2004 cars may still be 4C; read the chip
  • 2003 - 2010Chip: 4D-67Blade: TOY43(US / Canada cars)Overlap years may be 4D-67 or G; G is stamped on the blade
  • 2006 - 2010Chip: 4D-67Blade: TOY43(GCC / Europe cars)
  • 2011 - 2014Chip: GBlade: TOY43(US / Canada cars)Overlap years may be 4D-67 or G; G is stamped on the blade
  • 2012 - 2015Chip: G433 MHz(GCC / Europe cars)
  • 2015 - 2023This yearChip: H (8A)315 MHzFCC: HYQ12BDM, HYQ12BFB(US / Canada cars)Overlap years may be G or H; check the letter on the blade

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Toyota Camry 2016?

40 listings fit the Toyota Camry 2016: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Toyota Camry 2016 remote use?

Listings for the Toyota Camry 2016 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Toyota Camry 2016 key use?

The listings for this car carry: 8A+4D · 8A (H-chip) · TRPWS21 · 4D-72 (G) · 24C16 EEPROM. Check the chip in each listing's specifications.

Which FCC IDs do Toyota Camry 2016 remotes carry?

The remotes listed for this car carry FCC ID 12BEC, B74TA, BA4EQ, HYQ12BEL and HYQ14FBA. Match it with the FCC ID printed on your original remote.

Which blade profile does the Toyota Camry 2016 key use?

The blades listed for this car: TOY43 · TOY48 · VA2 · TOY51.

Which tools program a Toyota Camry 2016 key?

The tool makers' coverage lists name Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, Lonsdor K518, Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus for this car; 6 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Toyota Camry 2016 remote be programmed without a tool?

The remote is not programmed on the car by hand: it needs a tool or a dealer.