Skip to content

Toyota Corolla 2013 Key Fob & Car Keys

Keys that fit the 2013 Toyota Corolla: smart keys, flip keys and remote keys, 2, 3 or 4 buttons, FCC ID HYQ14AAB, GQ429T or HYQ14AEM, 4D-60 or 4D-72 (G) chip, 315 MHz. 27 compatible keys, remotes & shells (genuine and aftermarket) available for the 2013 Toyota Corolla.

Last updated: 17 November 2026

Key specifications for the Toyota Corolla 2013

Key types
smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz
Buttons
2-, 3- and 4-button
Transponder chip
4D-60 · 4D-72 (G) · 4D-67 · 4D · 8A (H-chip)
Blade profile
TOY51 · TOY43 · TOY48
Part numbers
89904-33310 · 89904-33460 · 89904-06130 · 89070-06421 / 89070-02880
Battery
CR1632 · CR2016 · CR2032

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. Every remote listed for the Toyota Corolla 2013 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Toyota Corolla 2013 key

Smart key (push to start)

7 tools list this key. 7 of them list all keys lost.

Programming steps

Add key - Autel MaxiIM IM508 / IM608(GCC / Europe cars)

Needs: working smart key, new smart key for the car, internet connection (if the tool asks for the data backup)

  1. Connect the VCI to OBD. IMMO > Toyota > select the model > Smart key > Keyless system (CAN).
  2. If the tool asks for it, run Back up IMMO data first (online) and save the file.
  3. Add smart key: switch the ignition on with the working key, follow the prompts (ignition off, hazard lights on where asked).
  4. Hold the working key to the Start button until one beep, then the new key until two beeps.
  5. Switch on, touch a learned key to the Start button, then test start and the remote buttons.
Watch out: Bring every key the customer keeps; check the remote buttons on each after programming. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.
Add key - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)

Needs: working smart key, new smart key for the car

  1. Connect the K518 by OBD. Immobilizer > Toyota > Select from type > (smart key system) > Add smart key.
  2. Hold the working key to the Start button and press it until the dashboard lights flash.
  3. Within 30 s hold the new key to the Start button; remove it after two beeps.
  4. Wait for registration complete, then test start and the remote buttons.
Watch out: Bring every key the customer keeps; check the remote buttons on each after programming. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.
All keys lost - Autel MaxiIM IM508 / IM608(GCC / Europe cars)

Needs: APB112 smart key simulator, XP400 (IM508), new smart key for the car (OEM or Xhorse / Autel universal), internet connection, no PIN entry (data read by OBD)

  1. Connect the VCI to OBD (and the APB112 to the tablet). IMMO > Toyota > select the model > Smart key > Keyless system (CAN).
  2. Back up IMMO data (online): the tool reads the smart box EEPROM by OBD; save the file.
  3. Generate simulator key: load the saved file, confirm the key type, connect the APB112 and let it be written.
  4. Hold the APB112 against the Start button and press Start: the dashboard comes on.
  5. Add smart key: say yes to using the simulator; hold the APB112 to the Start button until one beep, then the new key until two beeps.
  6. Wait for Registering to finish, then test start and the remote buttons of the new key.
  7. If the customer wants the lost keys gone, delete the keys not present with the tool's key erase function.
Watch out: The car battery must be charged; the data backup needs an internet connection. The simulator / emulator is erased if you use the device for another key job before adding the key: add the new key straight after generating it. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)

Needs: LKE 5-in-1 smart key emulator (older SKE emulators per chip type), new smart key for the car, no PIN entry (data read by OBD)

  1. Bind the LKE emulator to the K518 the first time you use it.
  2. Connect by OBD. Immobilizer > Toyota > Select from type > All smart key lost > Backup EEPROM (immo data) and save the file.
  3. Generate the emergency key: put the LKE in the K518 card slot and write it from the saved data.
  4. Hold the LKE to the Start button and press Start until the dashboard comes on.
  5. Add smart key: LKE (registered key) to the Start button until one beep, then within 30 s the new key until two beeps.
  6. Test start and remote; delete lost keys with Delete smart key if the customer wants them gone.
Watch out: The car battery must be charged; the data backup needs an internet connection. The simulator / emulator is erased if you use the device for another key job before adding the key: add the new key straight after generating it. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.

Key with a blade (regular or flip)

11 tools list this key. 8 of them list all keys lost.

  • Advanced Diagnostics Smart Pro
    • Add key
    • All keys lost
    • Remote
    online calculation
    Needs: AD ADC2000B cable
  • Launch X-431 IMMO
    • Add key
    • All keys lost
    • Remote
    • Add key
    • All keys lost
    • Remote
  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    • All keys lost(non-US cars)
    • Universal key
    • All keys lost(non-US cars)
    • Universal key
  • Xhorse VVDI2
    • All keys lost(non-US cars)
  • Advanced Diagnostics AD100 Pro / MVP Pro
    • Add key
    • Add key
  • Lonsdor KH100
    • Remote

All keys lost is listed by Advanced Diagnostics Smart Pro, Launch X-431 IMMO, Lonsdor K518, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus and Xhorse VVDI2. Advanced Diagnostics AD100 Pro / MVP Pro and Autel IM608 II / IM608 Pro II list add key only.

Programming steps

Add key - Autel MaxiIM IM508 / IM608

Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)

  1. Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
  2. Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer, then the key learning function.
  3. Insert the working master key and switch the ignition on when asked.
  4. Remove it, insert the new cut key and leave the ignition off (if learning fails, run it again with the ignition on).
  5. Wait for the security light to go out: the key is learned. Check it switches on and starts.
  6. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Watch out: A valet key cannot add keys: you need a master key. Use the chip family the car already has: a 4D key will not learn on a G car, a G key not on an H car.
Add key - Lonsdor K518ISE / K518S / K518 Pro

Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)

  1. Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
  2. Connect the K518 by OBD. Immobilizer > Toyota > select the model and year (or the 4D-G type menu) > Mechanical key > Add key.
  3. Insert the master key and switch the ignition on.
  4. When asked, insert the new cut key and switch the ignition on and off as the tool prompts.
  5. Wait until the tool reports the key programmed, then test that it starts.
  6. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Watch out: A valet key cannot add keys: you need a master key. Use the chip family the car already has: a 4D key will not learn on a G car, a G key not on an H car.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro

Needs: new keys cut to the car with blank 4D-67/68 or G chips, Lonsdor chip written as Toyota G (optional, G cars), no PIN entry (the tool resets by OBD)

  1. Cut the new keys first. For a G car the chip must be a Toyota G (80-bit); a Lonsdor blank can be written as Toyota G in the K518 (Generate key chip) before you start.
  2. Connect the K518 by OBD. Immobilizer > Toyota > select the model and year > Mechanical key (4D or G type) > Reset immobilizer (all keys lost).
  3. Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets and configures the immobilizer.
  4. Within 120 s register the keys: insert a master key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
  5. The security light goes out when programming is done. Test every key.
  6. Add further keys later with the normal add-key routine and one of the new masters.
  7. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons. Remotes not learned in this step stop working.
Watch out: The reset erases every registered key: bring every key the customer will keep and program them in the same session. You have about 120 s after the reset to register the keys; have them cut and on the bench before you start. Battery charged and steady during the reset. Not for H (8A) blade cars: see the 8A all-keys-lost entries.
All keys lost - Xhorse VVDI2 / VVDI Key Tool Max + Mini OBD / Key Tool Plus(GCC / Europe cars)

Needs: Xhorse Toyota 8A non-smart key all-keys-lost adapter (one adapter binds to one device), new H (8A) key cut to the car, internet connection (server calculation)

  1. Update the device. Disconnect the battery negative before wiring.
  2. Connect the adapter as the Xhorse guide shows for the car: fuse-box plug, ignition (lock) plug after unplugging the original, OBD, then the battery clamps.
  3. Toyota 8A immobilizer menu: run Immobox (8A) all key lost - OBD, make master key directly, with the new key in the device coil.
  4. Wait for the online calculation; the device writes a master key that starts the car.
  5. Disconnect every cable and restore the original fuses and plugs before you start the car.
  6. Test the new key; add more keys with the normal OBD add-key function.
Watch out: Put every fuse and plug back before starting the car: Xhorse warns the fuse box and the device can burn otherwise. Not for North American H cars (both makers say so); US cars need another route.

Key type not stated by the list

One tool lists this key.

Without a tool

The remote is not programmed on the car by hand: it needs a tool or a dealer.

When the key changed

Smart key (push to start)

  • 2011 - 2013This yearChip: 4D315 MHzFCC: HYQ14AAB(US / Canada cars)Push-to-start trims only
  • 2014 - 2019Chip: 8A315 MHzFCC: HYQ14FBA(US / Canada cars)Push-to-start trims only
  • 2019 - 2022Chip: 4A433 MHz(GCC / Europe cars)
  • from 2019Chip: 4A315 MHzFCC: HYQ14FBN, HYQ14FBW(US / Canada cars)4A type changes about 2023; match FCC id HYQ14FBN or FBW

Key with a blade (regular or flip)

  • 1998 - 2002Chip: 4C(GCC / Europe cars)
  • 2003 - 2010Chip: 4D-67(GCC / Europe cars)
  • 2005 - 2010Chip: 4D-67Blade: TOY43(US / Canada cars)Overlap years may be 4D-67 or G; G is stamped on the blade
  • 2011 - 2013This yearChip: GBlade: TOY43Overlap years may be 4D-67 or G; G is stamped on the blade
  • 2014 - 2022Chip: H (8A)FCC: HYQ12BEL, HYQ12BFBUS remotes 315 MHz, GCC remotes 433 MHz

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Toyota Corolla 2013?

27 listings fit the Toyota Corolla 2013: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Toyota Corolla 2013 remote use?

Every remote listed for the Toyota Corolla 2013 transmits on 315 MHz.

Which transponder chip does the Toyota Corolla 2013 key use?

The listings for this car carry: 4D-60 · 4D-72 (G) · 4D-67 · 4D · 8A (H-chip). Check the chip in each listing's specifications.

Which FCC IDs do Toyota Corolla 2013 remotes carry?

The remotes listed for this car carry FCC ID BA4EQ, GQ429T, HYQ12BBY, HYQ12BEL, HYQ14AAB, HYQ14AEM, HYQ14FBA and M0ZB41TG. Match it with the FCC ID printed on your original remote.

Which blade profile does the Toyota Corolla 2013 key use?

The blades listed for this car: TOY51 · TOY43 · TOY48.

Which tools program a Toyota Corolla 2013 key?

The tool makers' coverage lists name Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, Lonsdor K518, Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus for this car; 6 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Toyota Corolla 2013 remote be programmed without a tool?

The remote is not programmed on the car by hand: it needs a tool or a dealer.