Toyota FJ Cruiser 2012–2014 Key Fob & Car Keys
Keys that fit the 2012–2014 Toyota FJ Cruiser: remote keys and transponder keys, 3 buttons, 4D-60 or 4D-72 (G) chip. 15 compatible keys, remotes & shells (genuine and aftermarket) available for the 2012 Toyota FJ Cruiser.
Last updated: 15 November 2026
Key specifications for the Toyota FJ Cruiser 2012–2014
- Key types
- remote keys, transponder keys, key shells, emergency blades and key blanks
- Buttons
- 3-button
- Transponder chip
- 4D-60 · 4D-72 (G) · 4D-67
- Blade profile
- TOY43
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $3.65In Stock
- $4.18In Stock
- $0.84In Stock
Programming the Toyota FJ Cruiser 2012 key
Smart key (push to start)
One tool lists this key.
- Add key
Key with a blade (regular or flip)
5 tools list this key. 4 of them list all keys lost.
- Launch X-431 IMMO
- Add key
- All keys lost
- Remote
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
- Add key
- All keys lost
- Add key(US / Canada cars)
All keys lost is listed by Launch X-431 IMMO, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Lonsdor K518. Autel IM608 II / IM608 Pro II lists add key only.
Programming steps
Add key - Autel MaxiIM IM508 / IM608(US / Canada cars)
Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)
- Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
- Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer, then the key learning function.
- Insert the working master key and switch the ignition on when asked.
- Remove it, insert the new cut key and leave the ignition off (if learning fails, run it again with the ignition on).
- Wait for the security light to go out: the key is learned. Check it switches on and starts.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Add key - Lonsdor K518ISE / K518S / K518 Pro
Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)
- Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
- Connect the K518 by OBD. Immobilizer > Toyota > select the model and year (or the 4D-G type menu) > Mechanical key > Add key.
- Insert the master key and switch the ignition on.
- When asked, insert the new cut key and switch the ignition on and off as the tool prompts.
- Wait until the tool reports the key programmed, then test that it starts.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro
Needs: new keys cut to the car with blank 4D-67/68 or G chips, Lonsdor chip written as Toyota G (optional, G cars), no PIN entry (the tool resets by OBD)
- Cut the new keys first. For a G car the chip must be a Toyota G (80-bit); a Lonsdor blank can be written as Toyota G in the K518 (Generate key chip) before you start.
- Connect the K518 by OBD. Immobilizer > Toyota > select the model and year > Mechanical key (4D or G type) > Reset immobilizer (all keys lost).
- Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets and configures the immobilizer.
- Within 120 s register the keys: insert a master key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
- The security light goes out when programming is done. Test every key.
- Add further keys later with the normal add-key routine and one of the new masters.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons. Remotes not learned in this step stop working.
Key type not stated by the list
2 tools list this key. 2 of them list all keys lost.
- Add key
- All keys lost
- Remote
- Universal key
- Add key
- All keys lost
Without a tool
The remote is programmed on the car, without a tool.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: Every remote to be programmed, A key that fits the ignition
- Start with the key out, the driver's door open and unlocked, and every other door closed.
- Within 5 seconds, insert the key without turning it and pull it out, two times.
- Within 40 seconds, close and open the driver's door twice, then insert the key and pull it out once.
- Within the next 40 seconds, close and open the driver's door twice, insert the key and leave it in, then close the driver's door.
- Turn the ignition to ON without starting, back to OFF, and remove the key.
- Within 3 seconds the locks lock and unlock by themselves: the car is in programming mode. If they do not, start again from step 1.
- Within 40 seconds, hold LOCK and UNLOCK together on the remote for 1.5 seconds.
- Right after releasing them, hold LOCK alone for 2 seconds.
- Within 3 seconds the locks lock and unlock once: the remote is accepted. Two cycles mean it was not accepted, repeat steps 7 and 8.
- Repeat steps 7 to 9 for each extra remote.
- Open the driver's door to end programming.
When the key changed
Key with a blade (regular or flip)
- 2007 - 2010Chip: 4D-67Blade: TOY43Dot key; 2010 trucks can be 4D-67 or G
- 2010 - 2014This yearChip: G315 MHzBlade: TOY43FCC: HYQ12BBT(US / Canada cars)G stamped on the blade; 2010 trucks can still be 4D-67
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Toyota FJ Cruiser 2012–2014?
15 listings fit the Toyota FJ Cruiser 2012–2014: remote keys, transponder keys, key shells, emergency blades and key blanks, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
Which transponder chip does the Toyota FJ Cruiser 2012–2014 key use?
The listings for this car carry: 4D-60 · 4D-72 (G) · 4D-67. Check the chip in each listing's specifications.
Which blade profile does the Toyota FJ Cruiser 2012–2014 key use?
The blades listed for this car: TOY43.
Which tools program a Toyota FJ Cruiser 2012–2014 key?
The tool makers' coverage lists name Lonsdor K518, Launch X-431 IMMO, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Autel IM608 II / IM608 Pro II and Xhorse MINI OBD Tool (FT-OBD) for this car; 6 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Toyota FJ Cruiser 2012–2014 remote be programmed without a tool?
The remote is programmed on the car, without a tool.














