Toyota Fortuner 2012–2013 Key Fob & Car Keys
Keys that fit the 2012–2013 Toyota Fortuner: flip keys, remote keys and transponder keys, 2 buttons, FCC ID 12BBY or B41TA, 4D-60 or 4D-72 (G) chip, 433 MHz. 11 compatible keys, remotes & shells (genuine and aftermarket) available for the 2012 Toyota Fortuner.
Last updated: 17 November 2026
Key specifications for the Toyota Fortuner 2012–2013
- Key types
- flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 433 MHz
- Buttons
- 2-button
- Transponder chip
- 4D-60 · 4D-72 (G)
- Blade profile
- TOY43
- Part numbers
- 89070-52752 · 89071-71051 / 89071-71052
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. Every remote listed for the Toyota Fortuner 2012–2013 transmits on 433 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $4.18In Stock
Programming the Toyota Fortuner 2012 key
Key with a blade (regular or flip)
5 tools list this key. 3 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
- Launch X-431 IMMO
- Add key
- All keys lost
- Add key
- All keys lost
- Advanced Diagnostics AD100 Pro / MVP Pro
- Add key
- Add key(non-US cars)
All keys lost is listed by OBDSTAR Key Master G3, Launch X-431 IMMO and Lonsdor K518. Advanced Diagnostics AD100 Pro / MVP Pro and Autel IM608 II / IM608 Pro II list add key only.
Programming steps
Add key - Autel MaxiIM IM508 / IM608(GCC / Europe cars)
Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)
- Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
- Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer, then the key learning function.
- Insert the working master key and switch the ignition on when asked.
- Remove it, insert the new cut key and leave the ignition off (if learning fails, run it again with the ignition on).
- Wait for the security light to go out: the key is learned. Check it switches on and starts.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Add key - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)
Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)
- Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
- Connect the K518 by OBD. Immobilizer > Toyota > select the model and year (or the 4D-G type menu) > Mechanical key > Add key.
- Insert the master key and switch the ignition on.
- When asked, insert the new cut key and switch the ignition on and off as the tool prompts.
- Wait until the tool reports the key programmed, then test that it starts.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)
Needs: new keys cut to the car with blank 4D-67/68 or G chips, Lonsdor chip written as Toyota G (optional, G cars), no PIN entry (the tool resets by OBD)
- Cut the new keys first. For a G car the chip must be a Toyota G (80-bit); a Lonsdor blank can be written as Toyota G in the K518 (Generate key chip) before you start.
- Connect the K518 by OBD. Immobilizer > Toyota > select the model and year > Mechanical key (4D or G type) > Reset immobilizer (all keys lost).
- Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets and configures the immobilizer.
- Within 120 s register the keys: insert a master key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
- The security light goes out when programming is done. Test every key.
- Add further keys later with the normal add-key routine and one of the new masters.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons. Remotes not learned in this step stop working.
Key type not stated by the list
2 tools list this key. 2 of them list all keys lost.
- Add key
- All keys lost
- Remote
- Universal key
- All keys lost
When the key changed
Smart key (push to start)
- 2016 - 2020Chip: 8A433 MHz(GCC / Europe cars)
Key with a blade (regular or flip)
- 2005 - 2010Chip: 4D-67(GCC / Europe cars)
- 2011 - 2013This yearChip: G(GCC / Europe cars)
- 2017 - 2019Chip: H (8A)(GCC / Europe cars)
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Toyota Fortuner 2012–2013?
11 listings fit the Toyota Fortuner 2012–2013: flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Toyota Fortuner 2012–2013 remote use?
Every remote listed for the Toyota Fortuner 2012–2013 transmits on 433 MHz.
Which transponder chip does the Toyota Fortuner 2012–2013 key use?
The listings for this car carry: 4D-60 · 4D-72 (G). Check the chip in each listing's specifications.
Which FCC IDs do Toyota Fortuner 2012–2013 remotes carry?
The remotes listed for this car carry FCC ID 12BBY and B41TA. Match it with the FCC ID printed on your original remote.
Which blade profile does the Toyota Fortuner 2012–2013 key use?
The blades listed for this car: TOY43.
Which tools program a Toyota Fortuner 2012–2013 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, Launch X-431 IMMO, Lonsdor K518, Advanced Diagnostics AD100 Pro / MVP Pro, Autel IM608 II / IM608 Pro II and Xhorse MINI OBD Tool (FT-OBD) for this car; 5 of them list all keys lost. Check your tool's latest coverage list before the job.










