Toyota Hilux 2015 Key Fob & Car Keys
Keys that fit the 2015 Toyota Hilux: smart keys, flip keys and remote keys, 2 or 3 buttons, FCC ID 12BBY, B2N2K2K or B41TA, 4D-60 or 4D-72 (G) chip, 315 MHz or 433 MHz. 18 compatible keys, remotes & shells (genuine and aftermarket) available for the 2015 Toyota Hilux.
Last updated: 17 November 2026
Key specifications for the Toyota Hilux 2015
- Key types
- smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 315 MHz and 433 MHz
- Buttons
- 2- and 3-button
- Transponder chip
- 4D-60 · 4D-72 (G) · 8A (H-chip)
- Blade profile
- TOY43 · TOY48
- Part numbers
- 89070-0KB40 · 89071-71051 / 89071-71052 · 89070-0KC01
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $4.18In Stock
- $1.96In Stock
- $1.96In Stock
- $1.96In Stock
- $1.96In Stock
- $2.81In Stock
Programming the Toyota Hilux 2015 key
Key with a blade (regular or flip)
10 tools list this key. 8 of them list all keys lost.
- Advanced Diagnostics Smart Pro
- Add key
- All keys lost
- Remote
online calculationNeeds: AD ADC2000B cable - Launch X-431 IMMO
- Add key
- All keys lost
- Remote
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
- Add key
- All keys lost
- All keys lost(non-US cars)
- All keys lost(non-US cars)
- Xhorse VVDI2
- All keys lost(non-US cars)
- Advanced Diagnostics AD100 Pro / MVP Pro
- Add key
- Add key(non-US cars)
All keys lost is listed by Advanced Diagnostics Smart Pro, Launch X-431 IMMO, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Lonsdor K518, Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus and Xhorse VVDI2. Advanced Diagnostics AD100 Pro / MVP Pro and Autel IM608 II / IM608 Pro II list add key only.
Programming steps
Add key - Autel MaxiIM IM508 / IM608(GCC / Europe cars)
Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)
- Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
- Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer, then the key learning function.
- Insert the working master key and switch the ignition on when asked.
- Remove it, insert the new cut key and leave the ignition off (if learning fails, run it again with the ignition on).
- Wait for the security light to go out: the key is learned. Check it switches on and starts.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Add key - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)
Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)
- Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
- Connect the K518 by OBD. Immobilizer > Toyota > select the model and year (or the 4D-G type menu) > Mechanical key > Add key.
- Insert the master key and switch the ignition on.
- When asked, insert the new cut key and switch the ignition on and off as the tool prompts.
- Wait until the tool reports the key programmed, then test that it starts.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro(GCC / Europe cars)
Needs: new keys cut to the car with blank 4D-67/68 or G chips, Lonsdor chip written as Toyota G (optional, G cars), no PIN entry (the tool resets by OBD)
- Cut the new keys first. For a G car the chip must be a Toyota G (80-bit); a Lonsdor blank can be written as Toyota G in the K518 (Generate key chip) before you start.
- Connect the K518 by OBD. Immobilizer > Toyota > select the model and year > Mechanical key (4D or G type) > Reset immobilizer (all keys lost).
- Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets and configures the immobilizer.
- Within 120 s register the keys: insert a master key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
- The security light goes out when programming is done. Test every key.
- Add further keys later with the normal add-key routine and one of the new masters.
- Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons. Remotes not learned in this step stop working.
All keys lost - Xhorse VVDI2 / VVDI Key Tool Max + Mini OBD / Key Tool Plus(GCC / Europe cars)
Needs: Xhorse Toyota 8A non-smart key all-keys-lost adapter (one adapter binds to one device), new H (8A) key cut to the car, internet connection (server calculation)
- Update the device. Disconnect the battery negative before wiring.
- Connect the adapter as the Xhorse guide shows for the car: fuse-box plug, ignition (lock) plug after unplugging the original, OBD, then the battery clamps.
- Toyota 8A immobilizer menu: run Immobox (8A) all key lost - OBD, make master key directly, with the new key in the device coil.
- Wait for the online calculation; the device writes a master key that starts the car.
- Disconnect every cable and restore the original fuses and plugs before you start the car.
- Test the new key; add more keys with the normal OBD add-key function.
Key type not stated by the list
2 tools list this key. 2 of them list all keys lost.
- Add key
- All keys lost
- Remote
- Universal key
- Add key
- All keys lost
When the key changed
Smart key (push to start)
- 2016 - 2023Chip: 8A433 MHz(GCC / Europe cars)
Key with a blade (regular or flip)
- 1999 - 2004Chip: 4C(GCC / Europe cars)
- 2005 - 2011Chip: 4D-67Blade: TOY43(GCC / Europe cars)
- 2012 - 2015This yearChip: GBlade: TOY43(GCC / Europe cars)
- 2016 - 2021Chip: H (8A)(GCC / Europe cars)
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Toyota Hilux 2015?
18 listings fit the Toyota Hilux 2015: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Toyota Hilux 2015 remote use?
Listings for the Toyota Hilux 2015 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.
Which transponder chip does the Toyota Hilux 2015 key use?
The listings for this car carry: 4D-60 · 4D-72 (G) · 8A (H-chip). Check the chip in each listing's specifications.
Which FCC IDs do Toyota Hilux 2015 remotes carry?
The remotes listed for this car carry FCC ID 12BBY, B2N2K2K, B41TA and BA2TA. Match it with the FCC ID printed on your original remote.
Which blade profile does the Toyota Hilux 2015 key use?
The blades listed for this car: TOY43 · TOY48.
Which tools program a Toyota Hilux 2015 key?
The tool makers' coverage lists name Advanced Diagnostics Smart Pro, Launch X-431 IMMO, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Lonsdor K518 and Xhorse VVDI Key Tool Max for this car; 6 of them list all keys lost. Check your tool's latest coverage list before the job.

















