Skip to content

Toyota Tacoma 2012 Key Fob & Car Keys

Keys that fit the 2011–2012 Toyota Tacoma: smart keys, remote keys and transponder keys, 2 or 3 buttons, FCC ID GQ43VT20T, 4D-60 or 4D-72 (G) chip, 315 MHz. 18 compatible keys, remotes & shells (genuine and aftermarket) available for the 2012 Toyota Tacoma.

Last updated: 12 November 2026

Key specifications for the Toyota Tacoma 2011–2012

Key types
smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz
Buttons
2- and 3-button
Transponder chip
4D-60 · 4D-72 (G)
Blade profile
TOY43
Part numbers
89742-AE010 / 89742-AE011
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. Every remote listed for the Toyota Tacoma 2011–2012 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Toyota Tacoma 2012 key

Key with a blade (regular or flip)

4 tools list this key. 3 of them list all keys lost.

  • Launch X-431 IMMO
    • Add key
    • All keys lost
    • Remote
  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    • Add key(US / Canada cars)

All keys lost is listed by Launch X-431 IMMO, OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Autel IM608 II / IM608 Pro II lists add key only.

Programming steps

Add key - Autel MaxiIM IM508 / IM608(US / Canada cars)

Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)

  1. Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
  2. Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer, then the key learning function.
  3. Insert the working master key and switch the ignition on when asked.
  4. Remove it, insert the new cut key and leave the ignition off (if learning fails, run it again with the ignition on).
  5. Wait for the security light to go out: the key is learned. Check it switches on and starts.
  6. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Watch out: A valet key cannot add keys: you need a master key. Use the chip family the car already has: a 4D key will not learn on a G car, a G key not on an H car.

Key type not stated by the list

2 tools list this key. 2 of them list all keys lost.

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: Every remote to be programmed, A key that fits the ignition

  1. Start with the key out, the driver's door open and unlocked, and every other door closed.
  2. Within 5 seconds, insert the key without turning it and pull it out, two times.
  3. Within 40 seconds, close and open the driver's door twice, then insert the key and pull it out once.
  4. Within the next 40 seconds, close and open the driver's door twice, insert the key and leave it in, then close the driver's door.
  5. Turn the ignition to ON without starting, back to OFF, and remove the key.
  6. Within 3 seconds the locks lock and unlock by themselves: the car is in programming mode. If they do not, start again from step 1.
  7. Within 40 seconds, hold LOCK and UNLOCK together on the remote for 1.5 seconds.
  8. Right after releasing them, hold LOCK alone for 2 seconds.
  9. Within 3 seconds the locks lock and unlock once: the remote is accepted. Two cycles mean it was not accepted, repeat steps 7 and 8.
  10. Repeat steps 7 to 9 for each extra remote.
  11. Open the driver's door to end programming.
Watch out: Keep each time window: 5 seconds, then 40 seconds, then 40 seconds; the remote step also has 40 seconds.

When the key changed

Smart key (push to start)

  • 2016 - 2026Chip: 8A315 MHzFCC: HYQ14FBA, HYQ14FBB, HYQ14FBX(US / Canada cars)Page BA keys from 2024 (HYQ14FBX)

Key with a blade (regular or flip)

  • 2005 - 2010Chip: 4D-67Blade: TOY43(US / Canada cars)Transponder standard from 2007; some 2005-2006 trucks have none
  • 2011 - 2015This yearChip: GBlade: TOY43(US / Canada cars)
  • 2016 - 2019Chip: H (8A)Blade: TOY43(US / Canada cars)

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Toyota Tacoma 2011–2012?

18 listings fit the Toyota Tacoma 2011–2012: smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Toyota Tacoma 2011–2012 remote use?

Every remote listed for the Toyota Tacoma 2011–2012 transmits on 315 MHz.

Which transponder chip does the Toyota Tacoma 2011–2012 key use?

The listings for this car carry: 4D-60 · 4D-72 (G). Check the chip in each listing's specifications.

Which FCC IDs do Toyota Tacoma 2011–2012 remotes carry?

The remotes listed for this car carry FCC ID GQ43VT20T. Match it with the FCC ID printed on your original remote.

Which blade profile does the Toyota Tacoma 2011–2012 key use?

The blades listed for this car: TOY43.

Which tools program a Toyota Tacoma 2011–2012 key?

The tool makers' coverage lists name Launch X-431 IMMO, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Autel IM608 II / IM608 Pro II and Xhorse MINI OBD Tool (FT-OBD) for this car; 5 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Toyota Tacoma 2011–2012 remote be programmed without a tool?

The remote is programmed on the car, without a tool.