Skip to content

Toyota Tundra 2011–2015 Key Fob & Car Keys

Keys that fit the 2011–2015 Toyota Tundra: smart keys, remote keys and transponder keys, 2 or 3 buttons, FCC ID GQ43VT20T, 4D-60 or 4D-72 (G) chip, 315 MHz. 15 compatible keys, remotes & shells (genuine and aftermarket) available for the 2011 Toyota Tundra.

Last updated: 12 November 2026

Key specifications for the Toyota Tundra 2011–2015

Key types
smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz
Buttons
2- and 3-button
Transponder chip
4D-60 · 4D-72 (G)
Blade profile
TOY43
Part numbers
89742-AE010 / 89742-AE011
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. Every remote listed for the Toyota Tundra 2011–2015 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Toyota Tundra 2011 key

Key with a blade (regular or flip)

6 tools list this key. 4 of them list all keys lost.

  • Launch X-431 IMMO
    • Add key
    • All keys lost
    • Remote
  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    • Add key(US / Canada cars)
    • All keys lost(US / Canada cars)
    • Add key(US / Canada cars)
  • Lonsdor KH100
    • Remote

All keys lost is listed by Launch X-431 IMMO, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Lonsdor K518. Autel IM608 II / IM608 Pro II lists add key only.

Programming steps

Add key - Autel MaxiIM IM508 / IM608(US / Canada cars)

Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)

  1. Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
  2. Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer, then the key learning function.
  3. Insert the working master key and switch the ignition on when asked.
  4. Remove it, insert the new cut key and leave the ignition off (if learning fails, run it again with the ignition on).
  5. Wait for the security light to go out: the key is learned. Check it switches on and starts.
  6. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Watch out: A valet key cannot add keys: you need a master key. Use the chip family the car already has: a 4D key will not learn on a G car, a G key not on an H car.
Add key - Lonsdor K518ISE / K518S / K518 Pro(US / Canada cars)

Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)

  1. Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
  2. Connect the K518 by OBD. Immobilizer > Toyota > select the model and year (or the 4D-G type menu) > Mechanical key > Add key.
  3. Insert the master key and switch the ignition on.
  4. When asked, insert the new cut key and switch the ignition on and off as the tool prompts.
  5. Wait until the tool reports the key programmed, then test that it starts.
  6. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Watch out: A valet key cannot add keys: you need a master key. Use the chip family the car already has: a 4D key will not learn on a G car, a G key not on an H car.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro(US / Canada cars)

Needs: new keys cut to the car with blank 4D-67/68 or G chips, Lonsdor chip written as Toyota G (optional, G cars), no PIN entry (the tool resets by OBD)

  1. Cut the new keys first. For a G car the chip must be a Toyota G (80-bit); a Lonsdor blank can be written as Toyota G in the K518 (Generate key chip) before you start.
  2. Connect the K518 by OBD. Immobilizer > Toyota > select the model and year > Mechanical key (4D or G type) > Reset immobilizer (all keys lost).
  3. Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets and configures the immobilizer.
  4. Within 120 s register the keys: insert a master key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
  5. The security light goes out when programming is done. Test every key.
  6. Add further keys later with the normal add-key routine and one of the new masters.
  7. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons. Remotes not learned in this step stop working.
Watch out: The reset erases every registered key: bring every key the customer will keep and program them in the same session. You have about 120 s after the reset to register the keys; have them cut and on the bench before you start. Battery charged and steady during the reset. Not for H (8A) blade cars: no all-keys-lost route for them is written for this model.

Key type not stated by the list

2 tools list this key. 2 of them list all keys lost.

When the key changed

Smart key (push to start)

  • 2019 - 2021Chip: 8A315 MHzFCC: HYQ14FBA, HYQ14FBB(US / Canada cars)Push-start trims only (Platinum, 1794, some Limited)
  • 2022 - 2026Chip: 8A315 MHzFCC: HYQ14FBX(US / Canada cars)Page BA key (board 3041), all trims

Key with a blade (regular or flip)

  • 2005 - 2009Chip: 4D-67Blade: TOY43(US / Canada cars)Chip from the 2005 facelift; 2000-2004 trucks have no immobilizer
  • 2010 - 2015This yearChip: GBlade: TOY43(US / Canada cars)2010-2011 can be 4D-67 or G; read the key, G is stamped on the blade
  • 2016 - 2021Chip: H (8A)315 MHzBlade: TOY43FCC: GQ4-52T(US / Canada cars)Remote head key from 2017; 2016-2017 can still be G

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Toyota Tundra 2011–2015?

15 listings fit the Toyota Tundra 2011–2015: smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Toyota Tundra 2011–2015 remote use?

Every remote listed for the Toyota Tundra 2011–2015 transmits on 315 MHz.

Which transponder chip does the Toyota Tundra 2011–2015 key use?

The listings for this car carry: 4D-60 · 4D-72 (G). Check the chip in each listing's specifications.

Which FCC IDs do Toyota Tundra 2011–2015 remotes carry?

The remotes listed for this car carry FCC ID GQ43VT20T. Match it with the FCC ID printed on your original remote.

Which blade profile does the Toyota Tundra 2011–2015 key use?

The blades listed for this car: TOY43.

Which tools program a Toyota Tundra 2011–2015 key?

The tool makers' coverage lists name Launch X-431 IMMO, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Lonsdor K518, Autel IM608 II / IM608 Pro II and Lonsdor KH100 for this car; 5 of them list all keys lost. Check your tool's latest coverage list before the job.